Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Channels water from the door boot back into the drain path. Replace if cracked or clogged to prevent front leaks, standing water, and musty odors.
Basically rebuilt the washer from the ground up. Spent more money than a new washer but we have been so happy with the way this machine has worked over the last 19 years figured it would be money well spent. Read more
Washer won't start or shows door unlocked error? This door lever engages the latch switch when the door closes. Quick 10-15 minute DIY repair fix.
Replaced latch and strike. After watching your Video, it was easy less than 10 minutes, works perfect. Read more
Secure dryer vent hose to exhaust outlet and wall connection. Replace worn clamps to prevent duct slippage and maintain proper airflow. Confirm fit.
Converting your dryer from LP to natural gas? This conversion kit includes the regulator limiter, orifice spud, and instructions. DIY install in under 1 hour.
By putting on the part. Read more
Secures hose connections to prevent leaks in your washer. Replace if you notice dripping at hose fittings or loose connections. Verify fit with your model.
Took off cover, installed new parts. Read more
Replace your range indicator lens when cracked or clouded to restore control panel visibility. Clips into place for easy installation. Confirm fit with your model.
Got good advice. Parts in two days. To and running in an hour. Read more
Secures hoses to fittings and prevents leaks in your washer. Replace if worn, loose, or missing to stop drips and keep water connections tight. Confirm fit.
Replaced the tube and the clamp Read more
Fix a broken or missing detergent dispenser lid with this hinge pin. Simple 5-minute repair—just insert the pin and snap the lid back into place.
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
Stop motor rattling and shifting in your dryer with this retaining clip. Secures the motor to its mounting bracket for stable operation. DIY install.
We took the dryer out of the laundry room and took it apart, after reviewing numerous videos at Appliance Parts Pros for direction. Removed front panel, front bulkhead and drum. Then removed exhaust duct, blower assembly and finally motor. (Use large flat blade screw-driver to press very hard down and out on motor mount to remove). After reinstalling all components....motor, new exhaust duct work,front bearings in front bulkhead, and blower assembly, all went back together great. The most... Read more
Fix a washer that won't drain or leaves standing water by replacing a failed drain pump. This assembly moves water out during drain and spin cycles.
Replaced the pump, had a plumber clean out the clogged pipe Read more
Fixes dispenser lid that won't stay closed or fell off during wash. This short hinge pin secures the detergent cover. Easy 15-minute DIY repair.
Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.
Loud banging or excessive shaking during spin? This shock absorber stabilizes the tub and reduces vibration. DIYers report quiet operation after replacement.
Replaced the four dampers that attach to the bottom of the drum and the bottom "floor" of the washer. Now it's whisper quiet all the way through the wash cycle, just like new. Read more
Black door handle mounting screw for ovens and ranges. Replaces missing, stripped, or damaged screws that secure oven or broiler handle trim to door.
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more
Replaces worn or damaged washer spinner pulley. Installs on drum shaft to guide belt and maintain proper alignment. Essential when pulley shows wear or damage.
After disconnecting power, removed rear access panel. belt was already off. Removed bolt washers at center of pulley, removed pulley.installed new pulley on to drum shaft. Installed washers and bolt with blue thread locker applied to threads. Installed new belt. Reinstalled rear access panel. Reconnect to power. good to go! Read more
Dryer won't heat or advance cycles? This timer with chime controls cycle sequencing and signals the heating element. DIY repair takes about 1 hour.
Remove front door, front cover and drum, checked all the wires to and from the heater core including those attached to the fan housing and had full continuity through all components including fuses, temp controls, heater coil, etc, checked input for 220 volt and it was OK Ordered the timer and installed and it worked just fine, I think there should be a simple test that could be done on the timer to verify that this function is no longer working I would be happy to send you the old one... Read more