Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fixes ice dispenser not dispensing or auger not turning. This motor assembly drives the auger shaft that moves ice from bin to chute. Moderate difficulty.
Replaced the motor, however not the easiest to do with the older refrigerators. First I had to remove the shelf that hold the ice bin. There is a small screw midway underneath the tray. Once removed the shelf is loose but still hard to remove. There is a side panel that is slotted andonce removed the shelf can then be removed, but not knowing that it is a very odd fitting unit. Then comes the unplugging which cannot be seen so it is all by feel. Once the shelf drops down the plug is now... Read more
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more
Connects water tubes of different sizes at the base of your refrigerator door. Replace if leaking, cracked, or calcified to restore a watertight seal.
Every once in a while we'd get a small leak just under the left side (freezer door). I moved the fridge out and saw the water stain towards the front of the unit. Carefully removing the grate (see the video on how to do this so you don't snap the plastic brackets. They are part of the grate and there is one on the left and one on the right, centered from top to bottom.) Anyway the problem was visible. There is a water tube that runs into the door and presumedly up to the water dispenser. ... Read more
Secures shelves, panels, and brackets in your refrigerator. Replace if loose, stripped, or missing to restore stability. Verify fit with your model.
Replaced motor, fan and lock-nut. My repair was on a built in Refrigerator-Freezer so most of the time was spent on pulling out and putting back the unit to get to the area I needed to behind the upper top. Read more
Mounting screw secures panels, brackets, and trim on refrigerators and washers. Replace when fasteners are missing, loose, stripped, or damaged.
Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes. Read more
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Replacement rivet for refrigerator door bin hooks and shelves. Secures hooks to bins when the original rivet is broken, drilled out, or missing.
Pushed the "pop" out of the rivet with a nail. Could have kept it and reused it but I did not. Positioned the new hook pushed the pop-rivet in place and was done. Total time less than 3 minutes. Part was ordered on a Monday mid morning, regular shipping and it arrived by 9am on Tuesday. Moline Ill to St. Louis. Great job as always Appliance Parts! Read more
Defrost issues or ice buildup? This thermostat retainer clip secures the defrost thermostat to the evaporator for accurate temperature sensing.
Hex washer head screw for dishwashers. Secures door panels, control boards, latches, and internal components. Replace if missing, stripped, or damaged.
Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more
Fix frost buildup and warming issues with this 12-inch refrigerator defrost heater. Melts ice from evaporator coils during defrost cycles. Moderate DIY.
Replaced it and a few other parts while in there.26 year old refrigerator working great again! Read more
Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.
I pulled out the old housing and unplugged the motor. It pretty much came out in pieces. Remove the plastic from the motor, then had to take a pair of vice grips to hold the spindle in place to remove the auger. Remove what was still attached to the old Housing. Cleaned everything up and put the whole unit back together. The motor looked like it was somewhat cooked but still worked, so I ordered a new motor and auger to replace it. Because this fridge is 24 yrs old, Appliancepartspros... Read more
Fix a leaking or non-working ice maker with this replacement assembly. Simple DIY repair with 3 screws and a power connector. Works in 24 hours.
The Ice maker on the whirlpool was easy to change. It was 3 screws and disconnect the power. Then reverse the process. Had to wait 24 hours for the unit to cool to start making ice. Read more
Adjustable leveling leg that supports and stabilizes your refrigerator on uneven floors. Replace if broken, stripped, or missing to restore proper alignment.
Secures water supply hoses to fittings, preventing leaks in ice makers and refrigerators. Replace when rusted, bent, or losing grip. Verify fit.
Pop rivet secures sheet-metal panels, brackets, and burner jar lids on appliances. Replace missing, drilled-out, or damaged rivets for permanent hold.
Silicone lubricant conditions rubber seals and O-rings in appliances. Apply during service to ease installation and prevent leaks. Confirm fit by model.
It was a relatively easy fix and the video instructions on this site provided were helpful. The one piece that wasn't clear is the alumilastic was already on the replacement part so a separate tube is not required. That wasn't clear on the video and was an unneeded expense. Read more