Mdb8969sdm3 Maytag Parts

Best Seller

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: WP302868

Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.

Do-It-Yourself Stories from Customers like You Dishwasher door panel was rusting Prashant K. • Fishers , IN • October 11, 2014

I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without... Read more

$7.95

Compare At:: $9.38
You Save:: $1.43

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Tine Row Holder

5.0 (11)

By: Whirlpool

Part Number: WPW10175279

Color: gray. Measures about 3 inches high by 2-1/2 inches deep.

Do-It-Yourself Stories from Customers like You The bottom rack wheels broke. Brian R. • Ballston Spa , NY • June 06, 2021

Ordered the right parts for my make and model dishwasher it only took five minutes Read more

$9.95

Compare At:: $11.84
You Save:: $1.89

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Latch Strike (Dishwasher)

4.6 (5)

By: Whirlpool

Part Number: WPW10544004

This door latch strike is the catch mounted at the top of the dishwasher tub opening. It provides a secure engagement point for the door latch, helping the door close firmly so cycles can start and run properly. What it does:

Serves as the latch catch on the tub/frame for the door latch to lock onto
Helps ensure the door switch engages so the dishwasher will start
Restores proper door alignment and closure if the original strike is bent, loose, or missing
Common symptoms include door won't latch/close, dishwasher won't start, or door popping open mid-cycle

What's included:

1 door latch strike

Install notes:

Disconnect power at the breaker and turn off the water supply before servicing
Open the door and remove the mounting screws securing the old strike
Position the new strike, start screws by hand, and adjust so the latch engages smoothly; then tighten
Test door closure several times and run a short cycle to ensure proper operation

Do-It-Yourself Stories from Customers like You Dishwasher door will not close. Feroz R. • Puyallup , WA • June 20, 2022

Thanks for the repair videos on " AppliancePartsPros." They are very informative and hands-on. Saved hundreds of dollars By DIY. It requires a lot of patience. I ordered parts and they were delivered the next day. WOW!!!. Did not take very long to replace " the door latch and strike." Wife was so happy, she cooked me a great meal. Folks, AppliancePartsPros.com is very reasonable and professional. Thank You. I'd definitely use them in future projects. Read more

$46.95

Compare At:: $55.40
You Save:: $8.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dishwasher Upper Rack Adjuster Cover

5.0 (3)

By: Whirlpool

Part Number: WPW10251047

This cover snaps over the upper rack height-adjuster mechanism to keep it secure and protected. Replacing a damaged or missing cover helps the upper rack stay level and maintain its selected position. What it does:

Shields and retains the upper rack adjuster mechanism
Helps the rack adjust smoothly and hold its set height
Replaces a cracked, worn, or missing adjuster cover
Symptoms include exposed adjuster parts, difficulty changing rack height, rack not staying in position, or a loose/tilted upper rack

What's included:

One rack adjuster cover

Install notes:

Disconnect power to the dishwasher and shut off the water supply before servicing
Pull out the upper rack to access the adjuster on the affected side
Release the old cover's tabs, remove it, then align and firmly snap the new cover into place
The rack adjusts and locks evenly on both sides

Do-It-Yourself Stories from Customers like You "Helpful" dog yanked out top dish rack John P. • Jenison , MI • December 31, 2018

We have a 75 lb. boxer/lab mix that decided to help empty the dishwasher. We found him on the couch with the top dish rack hooked on his collar. Both adjusters were destroyed. I ordered the parts from AppliancePartsPros using standard delivery. I was surprised to find the parts were delivered 2 days after I ordered! It was a quick job to replace the adjusters and the dishwasher is back in service awaiting more "help" from our dog. I've ordered various parts from AppliancePArtsPros several... Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Mounting Bracket (Component Support)

3.0 (2)

By: Whirlpool

Part Number: W10837623

This mounting bracket secures an appliance component in the correct position, providing stable support and alignment. Replacing a damaged bracket helps stop looseness and vibration that can lead to noise, poor fit, or premature wear.

Provides a rigid mounting point to hold the related assembly in place
Restores proper spacing and alignment for consistent operation
Helps reduce rattling, buzzing, or vibration from movement
Replaces cracked, bent, or corroded brackets that no longer hold securely

What's included: 1 mounting bracket Install notes:

Disconnect power; shut off water supply if applicable
Note the original orientation; transfer any clips, spacers, or grommets from the old bracket
Reuse existing screws/fasteners; hand-start threads to avoid cross-threading
Do not overtighten fasteners; confirm clearance and smooth operation before reassembly

Do-It-Yourself Stories from Customers like You Puddles on the floor after a load Christopher P. • Derry , NH • February 03, 2019

The original gasket was popping loose and not always noticeable when loading. Followed video for removal, cleaning channel with q-tips, and installation of new gasket. Read more

$21.95

Compare At:: $25.90
You Save:: $3.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Power Cord Kit

4.8 (5)

By: Whirlpool

Part Number: 4317824

The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.

Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.

Symptoms of a bad power cord include:

The dishwasher not turning on or completing cycles
Warm or hot power cords during operation
Frayed, cracked, or exposed copper wiring

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015

Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (13)

By: Whirlpool

Part Number: WPW10348409

This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.

Provides threaded fastening for panels, brackets, covers, or internal components
Replaces worn, rusted, stripped, or missing hardware
Helps reduce vibration and rattling from loose parts
Restores proper alignment and a secure fit of attached parts

What's included: Includes 1 screw. Installation notes:

Disconnect power; turn off water supply before service
Note original screw location and retain any spacers or clips for reassembly
Start threads by hand to avoid cross-threading
Tighten snugly; do not overtighten to prevent stripping

Do-It-Yourself Stories from Customers like You Dishwasher would not start Mark M. • Midlothian , VA • July 16, 2016

Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

5.0 (4)

By: Whirlpool

Part Number: WP9741232

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Do-It-Yourself Stories from Customers like You Leaking around dishwasher door previous repair missing parts Patrick R. • Peachtree City , GA • November 15, 2014

I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Power Cord

5.0 (3)

By: Whirlpool

Part Number: W10877094

This power cord connects your appliance to a household outlet. Replacing a worn or damaged cord restores safe, reliable power and can help resolve no-power or intermittent power issues caused by a compromised lead.

Delivers electrical power from the outlet to the appliance
Replaces cords with cracked, frayed, or heat-damaged insulation or a damaged plug
Helps when the unit won't power on or loses power when the cord is moved
Addresses visible scorching, arcing, or melting on the cord or plug

What's included: 1 power cord Install notes:

Disconnect power before servicing; verify no voltage is present
Note wire positions or take a photo before removal; match to the same terminals on install
Use the proper strain relief/clamp and route away from sharp edges, moving parts, and heat sources
Confirm the ground connection is secure; do not modify the plug

Do-It-Yourself Stories from Customers like You Replace insulation Candace B. • N Chelmsford , MA • March 07, 2018

Awesome company! Very quick, good price and the right parts. Would order again no question. Read more

$99.95

Compare At:: $117.94
You Save:: $17.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Panel-Control (Blk)

5.0 (1)

By: Whirlpool

Part Number: W11230938

Color: Black

Do-It-Yourself Stories from Customers like You Start button did not work. Jayesh A. • Naperville , IL • April 12, 2020

Replaced the control panel. Read more

$145.41

Compare At:: $171.58
You Save:: $26.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Vinyl Touch Up Paint

5.0 (8)

By: Whirlpool

Part Number: WP676455

Color: Grey. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For white use WP676453. For tips use 676458.

Do-It-Yourself Stories from Customers like You Rusty tips on tops of posts in top and bottom racks of kitchen aid dishwasher James O. • Bedford , OH • July 04, 2016

Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure. Read more

$24.95

Compare At:: $29.69
You Save:: $4.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Access Panel Kit

3.8 (4)

By: Whirlpool

Part Number: W10871196

Color: Black - Part has been changed to an Access Panel Kit - The toe panel is no longer used.

Do-It-Yourself Stories from Customers like You Horrible door squeak needed kick plate too Linda L. • Paso Robles , CA • February 23, 2019

Kick plate was easy; screw holes in the wrong place, but used double-sided tape instead and worked great. Didn't need the extra screws ordered; it came with them. The roller spindles should be sent with a packet of grease. When replaced, the door was even louder than previous. Used candle wax on the spindles and it's quiet as can be now. Read more

$85.62

Compare At:: $102.74
You Save:: $17.12

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dishwasher Rack Adjuster (Left-Hand)

5.0 (6)

By: Whirlpool

Part Number: WPW10740408

This part replaces the left-side rack height adjuster in your dishwasher. It supports and locks the rack at the selected position so dishes load easily and the rack stays level throughout the cycle.

Controls and supports rack height on the left side
Helps keep the rack level; a failed adjuster may cause a drop or tilt
Common symptoms: rack won't raise/lower, left side sags, rack binds or is hard to slide
Restores smooth rack movement and consistent loading height

Includes: 1 left-hand rack adjuster. Install notes:

Disconnect power and water supply before servicing.
Pull the rack forward, remove end caps/stops, and lift the rack out.
Remove the damaged adjuster and install the new one on the left side (as viewed from the front). Reuse existing hardware as applicable.
Reinstall the rack and verify smooth travel and proper height adjustment.

Do-It-Yourself Stories from Customers like You Top rack on dishwasher Steve D. • Bethalto , IL • March 13, 2018

Needed to replace the top rack adjusters and one rail slide out. Parts came in less than 24 hours. Replacement parts were metal instead of plastic. Took me about 15 minutes to replace everything. Read more

$67.95

Compare At:: $81.54
You Save:: $13.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Support

5.0 (2)

By: Whirlpool

Part Number: WPW10609586

This replacement support restores a firm, level mount for its paired component inside your appliance. It keeps the part properly seated and aligned so shelves, racks, bins, or mechanisms remain stable and operate as intended. What it does:

Secures the mated component in the correct position
Maintains alignment and level support during use
Helps prevent wobble, sagging, binding, or disengagement
Common signs of failure: cracked or missing support, loose/uneven fit, rattling, component won't stay seated

What's included:

1 support

Install notes:

Disconnect power and shut off water supply before servicing.
Remove the affected component to access the support and note orientation.
Transfer/reuse original screws or clips if required by your design.
Seat the new support fully; if the design uses paired supports, inspect/replace both for even alignment. Test operation.

Do-It-Yourself Stories from Customers like You Upper rack was flopping all over George T. • North Easton , MA • November 04, 2018

Took out 3 torx screws on each side, much of the insides fell out at this point. At this point I had the new part and what was left of the old part and the adjust lever. Screwed them back together and that was that. The new support piece was not needed. Read more

$19.71

Compare At:: $23.45
You Save:: $3.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Dishwasher Upper Rack Adjuster (Right-Hand)

4.9 (11)

By: Whirlpool

Part Number: WPW10740410

Restore smooth, secure height adjustment to your dishwasher's upper rack with this right-hand rack adjuster. Replacing a cracked or worn adjuster keeps the rack level and properly attached to the rail for dependable loading and cleaning.

Raises/lowers and locks the upper rack on the right side
Keeps the rack aligned and secured to the slide rail
Helps the rack move smoothly during loading and unloading
When worn or broken, symptoms can include a sagging right side, rack that won't adjust height, binds or jumps off the track, or visible cracks

What's included: One right-hand upper rack adjuster assembly. Install notes:

Disconnect power to the dishwasher before servicing
Remove the upper rack by releasing the end stops on the rails
Move any rack clips or screws from the old adjuster to the new one as required; install on the right side when facing the appliance
Reinstall the rack and end stops, then verify smooth travel and proper height engagement

Do-It-Yourself Stories from Customers like You Top rack on dishwasher Steve D. • Bethalto , IL • March 13, 2018

$68.95

Compare At:: $81.36
You Save:: $12.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Vinyl Touch Up Paint

4.9 (8)

By: Whirlpool

Part Number: WP676453

Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679

Do-It-Yourself Stories from Customers like You Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015

Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more

$30.95

Compare At:: $37.14
You Save:: $6.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Mdb8969sdm3 Maytag Parts

Screw

Tine Row Holder

Door Latch Strike (Dishwasher)

Dishwasher Upper Rack Adjuster Cover

Mounting Bracket (Component Support)

Power Cord Kit

Screw

Screw

Power Cord

Panel-Control (Blk)

Vinyl Touch Up Paint

Access Panel Kit

Dishwasher Rack Adjuster (Left-Hand)

Support

Dishwasher Upper Rack Adjuster (Right-Hand)

Vinyl Touch Up Paint