Membrane Switch Number Ap6014122 Parts

This electrical switch restores reliable on/off signaling for a specific function in your appliance. Replacing a worn or burned switch helps ensure consistent activation and dependable operation of the affected feature. What it does

• Opens and closes an electrical circuit when actuated to start/stop a function
• Sends a clear signal to the control or power circuit for the selected operation
• Failure symptoms include the function not engaging, intermittent operation, or no response when actuated
• Visual clues can include darkened, melted, or loose terminals and an inconsistent click/feel

• 1 switch

• Disconnect power to the appliance before servicing; shut off water or gas if applicable
• Note wire positions and transfer connectors one at a time to the correct terminals
• Seat terminals fully and secure the switch without overtightening; avoid bending the actuator
• Test operation before final reassembly to ensure proper engagement

This switch is an electrical component that opens or closes a circuit inside your appliance. Replacing a worn or failed switch restores proper signaling to the control so the selected function responds reliably when actuated.

• Opens/closes an electrical circuit to send an on/off signal to the appliance's control or motor
• Enables the appliance to start, stop, or register a user input as designed
• Common symptoms: no response when pressed/activated, intermittent operation, feature stuck on/off, or error codes referencing a switch
• Resolves issues caused by heat, wear, moisture, or mechanical fatigue of the original switch

• Disconnect power at the breaker before servicing; verify power is off
• Note wire locations and take a photo; move connectors over one at a time to the new switch
• Do not force or bend terminals; replace any loose or heat-damaged connectors
• Restore power and test the function before final reassembly

This micro switch is a small, fast-acting on/off switch tripped by a mechanical lever or float to send a signal to the control. Replacing a worn microswitch restores accurate sensing so the appliance starts, stops, and runs when it should. What it does

• Senses the position of a linked mechanism (lever, float, latch) and opens/closes an electrical circuit
• Helps the control enable or disable functions only when conditions are correct
• Failure symptoms include intermittent operation, cycles that won't start, or a unit that keeps running until power is removed

• Disconnect power and, if applicable, shut off water before servicing
• Access the switch and note actuator orientation and terminal layout
• Move wires to the new switch one at a time to maintain correct placement; ensure tight connections
• Manually actuate the mechanism to ensure a positive "click" and proper operation before reassembly

The Thermal Relay is an OEM part for Bosch wall ovens and microwaves. It automatically disconnects electrical power in response to high temperatures, protecting against potential fires. 

Causes can be standard wear over time, repeated excessive temperature exposure, or damage from liquid intrusion. Periodically testing relay response helps ensure proper safety shutdown.

Symptoms of a faulty thermal relay include:

• Oven/range failing to power on or off as intended
• Electrical burning smells coming from internal components
• Oven heating elements remaining continuously energized
• Tripped circuit breakers during normal appliance use

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Magnetron is an OEM part for Bosch microwaves. The magnetron generates microwaves used for cooking and heating food. It contains a magnet and vacuum tube that work together with a high-frequency electrical field to produce electromagnetic waves.

Symptoms of a bad magnetron include:

• Microwave not heating or heating unevenly/inconsistently
• Smell of burning within the microwave
• Tripping of electrical breakers when microwave is operated
• Buzzing or crackling noises emanating from inside the unit

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replace a cracked or missing shelf and restore a flat, easy-to-clean storage surface inside your refrigerator. This glass shelf fits the designated location in your unit to keep food level, visible, and organized. What it does:

• Provides a flat, stable storage surface inside the fresh food compartment
• Restores capacity when a shelf is broken or missing
• Helps prevent spills and tipping caused by uneven or sagging shelves
• Common signs: cracked/shattered glass, broken edge tabs, shelf won't seat securely, reduced storage space

• 1 refrigerator shelf

• Remove food items; carefully slide the old shelf straight out
• Handle glass with both hands; wear cut-resistant gloves
• Align front/rear edges with the side rails or locator tabs and push straight in until fully seated
• Do not force the shelf; re-align if it binds to avoid damage

This control module is the appliance's main electronic control board. It interprets inputs and energizes components to run the correct sequences, restoring reliable operation when the original board is unresponsive, intermittent, or damaged. What it does

• Coordinates timing and operation of motors, valves, heaters, and other loads
• Monitors inputs from switches and sensors to make decisions
• Distributes power and controls relays/outputs to components
• Common failure symptoms: won't start, controls unresponsive or erratic, stops mid-cycle, or shows error codes

• 1 control module

• Disconnect power before servicing; electronic boards can carry residual charge
• Use ESD precautions; handle the board by the edges and avoid touching components
• Document wiring; move connectors one at a time and ensure they are fully seated and keyed correctly
• Secure the board and any ground straps; reassemble, restore power, and run the model's service/diagnostic test if applicable

This replacement refrigerator shelf restores a sturdy, level storage surface so you can organize food and containers and regain lost capacity. Install it to replace a cracked, warped, or missing shelf and keep items securely supported.

• Provides a flat, stable surface for storing food and containers inside the compartment
• Seats into factory rails or tabs to keep items level and accessible
• Replace if cracked, bowed, broken at the corners, or missing
• Common symptoms include wobbling, sagging, or the shelf not staying in place

• Disconnect power and remove items from the area before servicing
• If the old shelf is cracked (especially glass), wear cut-resistant gloves and handle carefully
• Note the original position; align the new shelf with the correct slots/rails and fully seat it
• Verify stability before reloading and avoid overloading the shelf

This door opening lever is the replacement release lever that lets the appliance door latch open and close smoothly, restoring reliable door-opening action and making everyday use easier. What it does:

• Replaces a worn, broken, or cracked lever that releases the door latch.
• Lets the door latch release properly so the door opens without excessive force or sticking.
• Works with the latch assembly to help ensure the door closes securely and operates smoothly.
• Addresses common symptoms such as a loose or unresponsive door handle, difficulty opening the door, or a lever that snaps.

• Disconnect power (and water, if applicable) before attempting any repair.
• Access may require removing the door trim or outer panel; basic hand tools are typically needed.
• Inspect surrounding latch components while replacing the lever and replace any damaged hardware.

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This factory fixing kit provides the mounting hardware needed to secure the applicable component or panel on your appliance. Replacing worn or missing fasteners restores proper alignment and a solid, rattle-free installation.

• Secures panels, brackets, or trim to the appliance chassis or door
• Helps prevent shifting, vibration, and rattling during operation
• Restores correct alignment and fit when hardware is missing or stripped
• Useful during initial installation or when re-installing serviced parts

• Disconnect electrical power; if your appliance is plumbed, shut off water before servicing
• Follow your model's installation/service instructions for exact hardware locations and orientation
• Tighten hardware evenly; do not overtighten to avoid damaging plastic or sheet metal
• Verify alignment and smooth operation before restoring power and/or water

This door latch secures the appliance door and helps enable normal operation by keeping the door closed and latched during cycles. Replacing a worn or broken latch restores proper door engagement and reliable start/lock behavior. What it does:

• Secures the door closed so the appliance can run and complete cycles
• Engages with the strike to maintain a tight, consistent seal during operation
• Helps the control detect a closed/locked door and permit cycle start
• Commonly replaced when the door won't stay closed, won't lock, or the unit won't start

• One replacement door latch

• Disconnect power and water before beginning any repair
• Access may require removing the inner door panel or front trim—keep fasteners organized
• Verify alignment of the latch and strike before reassembly to ensure proper engagement
• If the latch has electrical connectors, reconnect securely and avoid pinching wires

This heating element restores proper water temperature and drying performance in your dishwasher. When the original fails, cycles may run long and dishes can come out wet; replacing it brings back consistent, efficient cleaning results. What it does:

• Heats wash and rinse water to help dissolve detergent and remove soils
• Raises final rinse temperature to improve drying performance
• Works with the control and sensors to maintain target temperatures
• Common symptoms include water not heating, poor drying, extended cycles, or a heating-related fault

• 1 heating element

• Disconnect power at the breaker and shut off water before servicing
• Pull the dishwasher and/or remove the toe panel as needed to access the heater wiring and mounts
• Note wire positions and make secure, clean terminal connections
• After reassembly, run a test cycle and inspect for leaks and proper heating

This fan blower wheel circulates air inside the appliance to help maintain even temperatures and proper cooling. Replacing a worn or broken fan restores airflow and helps the appliance reach set temperatures consistently. What it does:

• Moves air through the evaporator/condenser area to support cooling and defrost cycles
• Helps prevent hot or cold spots by circulating conditioned air
• Commonly related to reduced cooling, noisy operation, or no airflow from the vents
• Can be a root cause of frost buildup or temperature fluctuations when failed

• Disconnect power before starting any repair to avoid electrical shock
• Access may require removing interior panels or the evaporator/condenser cover
• Inspect the mounting and motor for wear; replace the fan only if it matches the OEM shape and fit

This replacement cover protects internal components and restores the proper fit and finish of the original assembly. It secures nearby parts and helps prevent debris from entering sensitive areas. What it does:

• Covers and shields internal components from dirt and loose debris
• Secures the assembly and helps reduce vibration or rattling
• Replaces cracked, broken or missing covers that cause poor fit or unsecured parts
• Restores original appearance where the factory cover is damaged or lost

• Power off and unplug the appliance (or shut off circuit) before starting work
• Remove necessary access panels or screws to reach the cover; retain hardware for reassembly
• Align cover before fastening; do not force or over-tighten screws to avoid damage

Replacement refrigerator glass shelf that restores stable, easy-to-clean storage inside your fridge. Replaces a cracked, chipped or missing shelf so you can safely store food and containers while keeping the interior organized. What it does

• Provides a flat, durable surface for storing food, containers and small appliances.
• Replaces shelves that are cracked, chipped, broken or missing.
• Helps contain spills and makes cleanup faster with a smooth, wipeable surface.
• Fits into existing shelf rails/grooves to restore usable storage space.

• Unplug the appliance or disconnect power before installing and remove all items from the shelf area.
• Lift out the old shelf by sliding it out of the support grooves; position the new shelf into the same rails until it seats securely.
• Handle glass carefully — wear cut-resistant gloves and place the shelf on a padded surface during installation.
• If shelf supports, clips or rails are damaged, replace them before use and follow the appliance manufacturer's instructions.