Mvw8700vq0 Parts

Color: White

Color: Grey

This wire harness routes power and signals between a dryer's control and its components to restore reliable electrical connections and proper operation. It replaces a damaged or broken harness to stop intermittent power, no-starts, or component failures. What it does:

• Connects control board, switches, heating element and sensors with factory wiring and terminals
• Restores power and signal paths when original wires are frayed, burned, or disconnected
• Stops intermittent operation, fault codes, or components that won't power on due to open/shorted wiring
• Provides correct connector types and lengths to match the OEM routing and connections

• One complete wire harness as shown

• Disconnect all power before beginning service to avoid shock or injury
• Verify connectors match the original harness; route wires following factory clips and strain reliefs
• Inspect mating terminals and connectors for heat damage; replace any damaged components

This brace is a replacement mounting bracket that helps secure internal components and cabinet panels so moving parts stay aligned and your appliance operates more quietly and reliably. Simple, direct fit for service repairs. What it does

• Stabilizes and holds panels or assemblies in place to reduce vibration and movement
• Restores proper alignment of connected components for smoother operation
• Helps stop rattling or shifting that can cause noise during use
• Used when a bent, broken, or missing bracket is causing loose parts

• One brace

• Disconnect power (and water if applicable) before servicing the appliance.
• Remove the access panel or cabinet section needed to reach the damaged bracket.
• Replace the bracket using the original mounting screws and hardware; tighten securely but avoid overtightening.

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

The Motor Rotor is an OEM part for Whirlpool electric top-loading washers. Located internally at the center of the washer basket, it transmits power from the motor to spin water from clothes during extraction cycles.  

Symptoms of a faulty motor rotor include: 

• Slow or inefficient spin that leaves clothes dripping wet   
• Abnormal vibrations felt from the tub during spin
• Premature winding motor sounds due to rotor imbalance

Causes involve normal wear from years of moving wet laundry loads. Damage could also occur from objects left in pockets that damaged the rotor during spin.

This OEM replacement is compatible with additional Whirlpool, Kenmore, and Maytag top-loading washers.

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

The Stator is an OEM component specifically designed for Whirlpool washing machines. It is the stationary part of the washer motor that induces a magnetic field, causing rotation in the rotor and driving the agitator or basket movement. 

Symptoms of a bad stator include: 

• The washer not agitating or spinning clothes during cycles  
• Loud grinding or knocking noises from the motor area
• The washer needs to be reset frequently
• Slow or inconsistent agitation or spin speeds

Causes of a stator failing include normal wear and tear of internal electric components over many usage cycles. Replacing with this genuine Whirlpool part helps maintain dependable washing performance.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing worn internal parts like the stator proactively prevents potential future washer motor issues.

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

This tub ring, also called the tub cover or splash ring, snaps around the top of the wash basket to contain water and suds. Replacing a cracked ring helps stop over-the-rim leaks and protects fabrics from rough edges.

• Acts as a splash guard at the rim to keep wash water and suds inside during wash and spin
• Provides a smooth upper edge to help prevent fabric snagging on broken plastic
• Restores a secure seal at the tub opening when the original ring is cracked or warped
• Typical signs of failure: water splashing or leaking from the top, visible cracks, or the ring not locking firmly to the tub

• Disconnect power and turn off water before servicing
• Open the top/console as required by your model to access the tub opening
• Release the old ring's locking tabs; transfer any attached retainers/hoses to the new ring if present
• Seat the new ring evenly and snap all tabs fully into place; run a quick test to check for leaks

This replacement water inlet valve controls the flow of water into the appliance, restoring proper fill operation and preventing overfill or no-fill conditions. Fits the OEM inlet-valve location and restores timed water delivery. What it does:

• Opens and closes to allow water into the appliance when the control signals a fill cycle.
• Replaces valves that fail to open (no fill) or that stay open (continuous fill).
• Stops or reduces water flow when solenoids close, helping prevent overfilling and intermittent filling.
• Common symptom linkage: appliance won't fill, fills slowly, fills continuously, or leaks at the valve connection.

• Disconnect power and shut off the water supply before starting; relieve water pressure by running a short cycle or opening a faucet.
• Handle electrical connectors and solenoid terminals carefully; avoid pulling on wires.
• Inspect and replace any damaged inlet hoses, gaskets, or mounting hardware when present.
• After installation, restore water and power, then test several fill cycles and check all connections for leaks.

This lower wire harness routes power and signals between the control and the components beneath the tub on select 4.7/4.8-cu ft top-load washers. Replacing a damaged harness restores reliable connections and helps resolve intermittent motor or pump operation. What it does:

• Distributes power and control signals to lower-cabinet components
• Supports proper operation of the drive motor, drain pump, and related parts
• Typical symptoms: no spin or agitate, won't drain, intermittent operation, or visible heat damage/corroded connectors
• Match by part number for correct fit on 4.7/4.8-cu ft platform models

• 1 lower wire harness assembly

• Disconnect power and water supply before servicing
• Access the underside per your model (tilt the washer or remove panels as required)
• Transfer one connector at a time; route along the factory path and secure with existing clips/ties away from moving parts and sharp edges
• After installation, run a diagnostic or test cycle to normal operation