Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more
Replaced hinges. Hinges mounting holes were not threaded. Needed to tap holes with 10-24 tap. Read more
I used lime away, vinegar, finish washer cleaner none of them worked. Finally just use Brillo on the entire cabinet interior. It came out very clean. Only needed very light scrubbing. Then replaced the severely corroded filters Riser tube and upper jet which was not turning. After this the upper arm turned perfectly silverware and glassware and silverware came out rinse very clean. Will do preventative maintenance in the future. Dishwasher was about 5 years old GE Profile high-end Read more
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
Installed new pump drain assembly. Word to the wise: Always check the small drain pouch located in the rear below the bottom screen cover for small particles (broken glass, broken plastic silverware, plastic wrap material that could be blocking the drainage inlet. Read more
Color: light gray. Measures about 8 inches wide by 3-1/2 inches high.
Bought new replacement part and installed it. Read more
Color: Black
The instructions that came with replacing the detergent tank locknut were pretty clear. Separating the inner and outer surfaces of the door requires some care. The two surfaces are held together by a number of Phillips head screws. Once the two surfaces are loose, there is a ribbon cable, and a multi-pin IDC connector that connect the control panel on the front door, to the control module mounted on the inner door. You have to carefully disconnect the cables from the control module so as... Read more
Specs: 10 - 32 t hex 7/16 s
Got new panel from appliance parts pros works like new at a great price Read more