Rb28 Parts

An adjustable leveler that supports and raises or lowers the appliance to help stabilize it on uneven floors. Restores proper alignment to reduce rocking, vibration, and door misalignment for improved performance and safety. What it does:

• Provides height adjustment to level the cabinet and prevent rocking
• Helps doors close and seal correctly by correcting leaning or unevenness
• Reduces vibration and movement that can cause noise or wear
• Simple turn-to-adjust design for fine tuning appliance position

• Unplug the appliance (and shut off water supply for units with plumbing) before working nearby
• Support the appliance when adjusting so it does not tip; use a helper or appliance dolly as needed
• Turn the leveler by hand or with a wrench; adjust both front/back or left/right sides evenly and re-check with a level

This hose clamp secures a rubber or plastic hose to its fitting on your appliance, maintaining a tight, leak-resistant seal under vibration and pressure. Replace when the old clamp is rusted, bent, or no longer holds tension. What it does:

• Clamps around a hose to grip the fitting and seal the joint
• Helps prevent drips, leaks, and hose blow-off at the connection
• Restores secure clamping force when the original is worn or damaged
• Common symptoms: water at the connection, hose slipping off, visible corrosion or distortion

• 1 hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, seat hose fully on the fitting, then position clamp just behind the bead/raised lip
• Tighten or compress evenly with the appropriate tool; avoid overtightening that could damage the hose
• After reassembly, run a short test and inspect for leaks

This silicone lubricant is used during appliance service to condition rubber seals and O-rings, especially in dishwashers. It eases installation and helps new seals seat properly for a reliable, leak-resistant connection on pumps, valves, and hose fittings.

• Lubricates rubber seals, O-rings, and gaskets to prevent rolling, tearing, or binding during assembly
• Helps seals seat correctly to support leak-resistant joints
• Aids insertion of hoses, plastic fittings, and pump components
• Helpful when reassembling sump, diverter, inlet, and drain connections
• Common signs it may be needed: difficulty installing seals, seals that dislodge, or seepage after a seal replacement

• Disconnect power and water before servicing the appliance
• Clean and inspect mating surfaces; replace any cracked, flattened, or cut seals
• Apply a light, even film to the rubber part only; avoid over-application
• Wipe away excess; do not use lubricant to compensate for damaged seals—replace them

The Refrigerator Protector is an essential component for maintaining the integrity of your Samsung refrigerator. Designed to safeguard key areas from spills, stains, and wear, this protector ensures your appliance remains in pristine condition. Made as a genuine OEM part, it guarantees a perfect fit and reliable performance with a wide range of Samsung refrigerator models. Installing the Refrigerator Protector helps extend the lifespan of your appliance by preventing damage to the interior surfaces. Its durable material resists everyday wear and tear, providing long-lasting protection. Easy to install, this protector allows you to quickly restore your refrigeratorGÇÖs functionality without hassle. Whether youGÇÖre replacing a worn-out part or enhancing your fridgeGÇÖs durability, the Refrigerator Protector offers a practical solution. Trust in a genuine OEM part to deliver the quality and compatibility you need for optimal performance and peace of mind.

This condenser fan blade is the rotating plastic blade that moves air across the condenser coils to help remove heat from the refrigerator. Replacing a damaged blade restores proper airflow for more consistent cooling. What it does:

• Spins on the condenser fan motor to circulate air over condenser coils
• Helps dissipate heat so the compressor and fridge run efficiently
• Can cause reduced cooling or higher temperatures if broken or missing

• Disconnect power to the appliance before starting any service
• Inspect the fan motor shaft and mounting for wear; replace motor if shaft is damaged
• Handle the blade carefully to avoid cracking; ensure blade is seated and secured before testing

Defrost timer that advances the refrigerator's defrost cycle at roughly six-hour intervals to help prevent excessive frost buildup and keep cooling consistent. Replaces a failed timer to restore regular defrost scheduling. What it does:

• Advances the defrost cycle so the heater can melt frost from the evaporator on a timed schedule.
• Helps prevent heavy ice buildup that can reduce airflow and cooling performance.
• Common symptoms of a failing timer: excessive frost or ice accumulation, compressor running constantly, or inconsistent temperatures.
• Works with mechanical defrost systems to alternate between cooling and defrost intervals.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle connectors and wiring carefully; ensure all terminals are fully seated.
• Mounting hardware and connector types can vary by model—retain original fasteners and note wiring positions before removal.

Open(F) 47, close(F) 15, clip style - snap-on

The thermostat bulb clip is an OEM component specifically designed for Whirlpool drop-in electric ranges, securely fastening the thermostat sensor bulb. This clip features corrosion-resistant spring coils and precision tips.  

Symptoms of a bad thermostat bulb clip include:  

• Dangling thermostat bulb
• Temperatures inside oven might be incorrect because sensor bulb is not mounted correctly.

Causes of failure involve metal fatigue weakening the thermostat bulb clip over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the thermostat bulb.

Replace yours today with this genuine OEM Whirlpool clip. Compatible with Jenn-Air, GE, and select Kenmore appliances, reinforced coils maintain constant tension assuring safety. Reliable glass retention enhances interior illumination for tasks.

The Refrigerator Door Roller Assembly is essential for maintaining the smooth operation of your refrigerator door. This genuine OEM part ensures that your refrigerator doors glide effortlessly, reducing noise and preventing unnecessary strain on the appliance. Designed specifically for Samsung refrigerators, the Roller Assembly guarantees a perfect fit and seamless integration with your existing unit. Installing this part can help restore the original functionality of your refrigerator, making it easier to access your stored items and enhancing the overall user experience. The durable construction of the Refrigerator Door Roller Assembly ensures long-lasting performance, minimizing the need for frequent replacements. Whether your current roller assembly is worn out or damaged, this genuine OEM part provides a reliable solution to keep your refrigerator working efficiently. By choosing this Roller Assembly, you invest in quality and ensure that your Samsung refrigerator continues to operate at its best, offering you convenience and peace of mind.

A single pop rivet used to secure sheet-metal parts and small brackets on appliances for a permanent, vibration-resistant hold. Replaces missing or damaged rivets to restore proper attachment without welding. What it does:

• Provides a permanent blind-rivet fastening point for panels, brackets and trim.
• Replaces rivets that are sheared, loose or missing and prevents rattling or misalignment.
• Ideal where a solid, tamper-resistant join is required and screws aren't suitable.
• Works with a compatible pop-rivet tool for quick installation.

• Drill out the old rivet carefully; use the proper size hole for the replacement rivet.
• Use a dedicated pop-rivet tool and wear eye protection during installation.

This latch knob screw secures the latch knob to its shaft on compatible appliances. Replace a missing, stripped, or rusted screw to restore a firm, reliable attachment and proper latch/knob operation. What it does:

• Attaches the latch knob securely to the latch mechanism/shaft
• Helps maintain proper door latch engagement and knob control
• Common fix for a loose, wobbly, or falling-off knob
• Replaces a lost, corroded, or cross-threaded screw

• 1 latch knob screw

• Disconnect power and allow the appliance to cool completely before servicing
• Align the knob on the shaft and start the screw by hand to avoid cross-threading
• Tighten with the correct screwdriver; do not overtighten to prevent damage
• The latch engages and releases smoothly after installation

This replacement ejector is the plastic arm that pushes harvested ice cubes out of the ice mold and into the storage bin, helping restore proper ice ejection and reduce ice that sticks inside the tray. What it does:

• Pushes ice cubes out of the ice mold during the ice maker's harvest cycle.
• Works with the ice maker's motor/gear assembly to advance cubes into the bin.
• Replaces worn, cracked, or broken ejector arms that can leave ice stuck in the mold.
• Can help address symptoms such as cubes that don't eject, partial fills, or frequent ice jams.

• Disconnect power to the refrigerator before servicing to prevent electrical shock.
• Remove the ice bin and follow the OEM ice maker removal steps to access the ejector.
• Handle plastic components carefully to avoid cracking; inspect gears, mounts, and the ice tray for related wear.

This PTC relay is the start device that helps the compressor turn on reliably, restoring normal cooling performance. It replaces a worn or failed start relay to help the compressor access the motor's start winding when power is applied. What it does

• Provides a timed start boost to the compressor by engaging the start winding via a positive temperature coefficient (PTC) element.
• Commonly used when a refrigerator is slow to cool or the compressor struggles to start.
• Reduces repeated hard starts that can lead to overheating or compressor stress.
• Works only as the start relay—does not replace the compressor, overload protector, or wiring.

• One PTC relay

• Disconnect power to the appliance before attempting replacement to avoid shock or injury.
• Verify terminals and orientation match the old relay before installing; replace only if part number and connector type match.
• Do not modify the part or wiring; use as a direct replacement.

The Refrigerator Door Gasket is essential for maintaining the efficiency of your Samsung refrigerator. This genuine OEM part ensures a perfect seal, preventing cold air from escaping and keeping your contents fresh. Designed specifically for Samsung refrigerator models, the gasket provides a secure fit that enhances the appliance's performance. By replacing a worn or damaged gasket with this high-quality component, you can reduce energy consumption and avoid unnecessary utility costs. The Refrigerator Door Gasket also helps to minimize moisture buildup, which can prevent mold and mildew from forming inside your fridge. Installation is straightforward, allowing you to restore your refrigerator's functionality without hassle. Investing in this genuine OEM part guarantees durability and reliability, ensuring your Samsung refrigerator operates smoothly for years to come. Experience improved temperature control and extended appliance life with the Refrigerator Door Gasket, a simple solution for optimal refrigerator performance.

This spring-style tube clamp secures flexible tubing to fittings, helping prevent leaks and maintain proper flow. It's a simple replacement that restores a firm seal on water or drain lines. What it does:

• Keeps flexible tubing firmly clamped to barbed or nipple fittings
• Helps stop or reduce leaks from loose or corroded connections
• Prevents tubing from slipping off under pressure or vibration
• Useful where a compact, spring-action clamp is required

• Disconnect power and shut off water to the appliance before replacing parts
• Use pliers to expand the clamp, position it over the tube/fitting, then release to secure
• Inspect connected tubing and fittings for damage; replace if cracked or severely corroded

The Refrigerator Interior Incandescent Lamp is a reliable component designed to restore optimal lighting within your Samsung refrigerator. This genuine OEM part ensures a perfect fit and seamless integration with a variety of Samsung refrigerator models, providing consistent illumination to your appliance's interior. The incandescent lamp delivers bright and efficient lighting, making it easier to locate and organize your food items, enhancing the overall usability of your fridge. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and saving you time and effort. Installing the Refrigerator Interior Incandescent Lamp is straightforward, allowing you to quickly replace a faulty or burnt-out lamp without hassle. By choosing this genuine OEM part, you can maintain the functionality and appearance of your refrigerator, ensuring a pleasant and convenient experience every time you use your appliance. Trust in the quality and compatibility of this lamp to keep your refrigerator well-lit and efficiently functioning.