Sde 4606Ayw Parts

This bracket is the mounting base for the dryer's cylinder support roller. Replacing a bent or worn bracket restores proper roller alignment so the drum turns smoothly, reducing vibration and noise and preventing premature wear.

• Provides the fixed mount for the cylinder support roller
• Maintains drum alignment for smooth, even rotation
• Replace if the bracket is bent, cracked, or mounting holes are elongated
• Common symptoms of a failing bracket: loud rumbling/thumping, scraping, excessive vibration, or visible roller misalignment

• Disconnect power; for gas models, also shut off gas supply
• Access the roller area per your model's service information and support the drum
• Transfer the roller/axle and spacers from the old bracket; install the new bracket in the same orientation
• Verify the roller spins freely and hand-rotate the drum to check for binding before test run

This thermostat with green and white leads monitors and helps regulate dryer heat so the machine maintains safe operating temperatures and consistent drying performance. It replaces a failed temperature-sensing switch. What it does:

• Senses drum/air temperature and opens or closes the circuit to control heating
• Helps prevent overheating when the thermostat opens at its set point
• Restores proper heat cycling when a worn thermostat causes no heat or continuous heating
• Compatible where a single sensing thermostat with green and white leads is specified

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the thermostat and leads carefully; do not bend the sensing bulb/shield excessively
• Test dryer operation after installation and before returning to regular use

This switch knob fits onto the control switch shaft so you can select settings and operate the machine. Replacing a cracked, stripped, or missing knob restores smooth, reliable control and keeps daily use straightforward. What it does:

• Fits over the control switch shaft to turn the switch and choose settings
• Restores a secure grip and clear position when selecting options
• Helps resolve issues like slipping when turning or a knob that won't stay attached
• Common symptoms: cracked knob, stripped insert, loose or missing knob, difficulty selecting settings

• 1 switch knob

• Disconnect power before servicing
• Pull the old knob straight off; remove any retaining clip or set screw if present and save it
• Align the flat/D-shaft orientation and press the new knob fully onto the switch shaft
• Test the switch through all positions to confirm proper engagement

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

This is the idler tension spring that holds the dryer belt tight for smooth drum rotation and reliable drying. It restores proper belt tension to help eliminate slipping and uneven drum movement. What it does:

• Applies tension to the dryer idler assembly so the belt stays engaged with the drum and motor pulley
• Helps stop belt slippage that can cause the drum to not turn or to turn intermittently
• Reduces squealing or rubbing noises caused by a loose or worn tension spring
• Works with the idler pulley and belt to maintain consistent drum rotation during operation

• 1 idler tension spring

• Disconnect power to the appliance before any service to prevent shock or injury
• Access may require removing the dryer front or top; follow OEM service instructions for your model
• Relieve belt tension carefully when removing/installing the spring; use gloves and eye protection
• After installation, verify proper belt alignment and test a short cycle to confirm normal operation

This is a genuine replacement mounting screw used to secure appliance components and panels. It restores proper fit and prevents movement that can cause noise or misalignment. What it does:

• Fastens panels, brackets, and small components in place
• Helps stop rattling or vibration caused by loose hardware
• Restores secure attachment after stripped or missing fasteners
• Matches OEM thread and head style for correct fit

• Use the correct driver to avoid stripping the head
• Tighten until snug; do not overtighten to prevent damage
• Disconnect power to the appliance before accessing internal components
• Replace matching screws in the area for consistent fit

This rear bulkhead assembly with seal replaces the washer's rear tub enclosure to restore a watertight connection and support the drum. It prevents leaks and helps maintain proper tub alignment for reliable operation. What it does:

• Seals the back of the washer tub to stop water from leaking at the rear
• Provides the mounting surface and alignment for the tub and rear components
• Helps prevent moisture damage to internal components and wiring
• Common symptom: water pooling or dripping from the rear of the machine

• One rear bulkhead assembly with seal

• Disconnect power and shut off water before beginning any repair
• Handle the seal carefully to avoid nicks; damaged seals can leak
• Basic hand tools required; verify fastener locations and torque per OEM guidance

This door liner seal provides a watertight barrier between the washer door and tub, helping prevent leaks and keeping laundry contained during cycles. Designed as a direct-replacement service part for compatible Speed Queen front-load washers. What it does:

• Seals the gap between the door and the tub to stop water from escaping during wash and rinse cycles
• Helps maintain proper drum containment and reduces water on the door opening
• Commonly replaced when you see visible wear, tearing, or persistent leaking from the door area
• Compatible with OEM door assembly designs that use a packaged liner seal

• Follow manufacturer instructions for proper seating and clamping
• Inspect surrounding door boot and latch for damage; replace if worn to ensure a proper seal
• Disconnect power and water supply before starting work to reduce risk of shock or flooding
• Test with a short cycle and check for leaks after installation

This mechanical timer controls the wash cycle sequence and advance on compatible top-load washers, restoring proper cycle selection and timing. Replaces a worn or failed console timer to return reliable cycle progression. What it does:

• Rotates through wash, rinse and spin sequences to advance the machine through selected cycles
• Engages internal cams/switches that direct power to motor, valves and other components
• Commonly replaced when cycles won't advance, the washer won't start, or settings do not change
• Works with the washer's console to ensure accurate cycle timing and selection

• Disconnect power before starting — this part requires access behind the control console
• Handle gently to avoid bending shaft or damaging wiring harness connections
• Verify timer orientation and engagement with control knob and mounting tabs during reassembly

This idler lever is the replacement lever that supports the washer's drive system, restoring proper belt tension and smooth drum rotation. Replacing a worn lever reduces slipping and helps the washer run quietly and reliably. What it does:

• Positions and tensions the drive belt or pulley to transfer motor power to the drum
• Restores proper belt alignment to prevent slipping or loss of drive
• Removes noise caused by a loose or damaged idler lever during spin or agitation
• Helps prevent uneven or intermittent drum movement linked to a failing lever

• One lever, idler

• Disconnect power before beginning any repair to avoid electric shock
• Inspect adjacent components (belt, pulleys, mounts) and replace if worn for best results
• Use basic hand tools; secure parts per the manufacturer's service instructions

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working

This rotary oven selector switch controls oven functions and temperature selection so the range operates reliably and you can choose the correct cooking mode. Designed to replace a worn or non-working selector control. What it does:

• Selects oven mode (bake, broil, etc.) and communicates the chosen setting to the control system
• Restores responsive control when the selector is stiff, intermittent, or fails to click into positions
• Helps eliminate incorrect oven operation or inability to change cooking modes
• Works as the user-facing control for oven function selection on compatible ranges

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Access typically requires removing the control panel or console; handle glass and trim pieces carefully
• Verify alignment and detents before reassembling to ensure proper function