Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures panels, handles, and components on your range. Replace this screw if it's stripped, missing, or damaged during door or handle repairs.
Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more
Replacement screw that secures the handle to the oven door trim. Needed when original screw is stripped, rusted, lost, or damaged during handle replacement.
Overall the fix wasn't too hard. The challenge was putting the oven door back together and holding it together while trying to tighten the screws. Enlisted my wife's help to hold the door and at first the handle screws wouldn't tighten. My cordless screwdriver's battery was under-charged. Once I switched batteries I was able to tighten the screws. Seemed like I needed to push too hard (my wife freaked "not so hard you will strip them!") however pushing hard was what was needed. Both screws... Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Replaces the oven floor panel that sits above the bake element. Needed when warped, cracked, or damaged from spills or foil contact. Restores smooth surface.
The problem is a finicky ignition system, Direct Spark Ignition. Apparently Whirlpool redesigned the igniter/burner assembly slightly to make it more reliable. The repair is very easy. Turn off power, but you don't need to turn off gas. Remove oven bottom and flame spreader, then remove burner/igniter assembly, one screw at front, one at back. Lift out burner assembly carefully to avoid stretching wire. Pull electric connector from pin on burner/igniter assembly. Vacuum to clean oven. ... Read more
Replacement mounting screw for washer drum baffles. Secures baffles to drum interior. Order if original screw is stripped, lost, or corroded during repair.
I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more
Replacement oven door handle for ranges. Installs on the front of the oven door. Order when your handle is cracked, broken, or detached. Requires screws.
Fix a gas burner that won't light or clicks but doesn't ignite. This range surface burner igniter creates the spark to light your stovetop. 15-30 min repair.
I removed the burners and replaced the igniters. The burners must be removed because the igniters go underneath them. This job turned out to be very difficult because my stove is 16 years old and the screws holding down the igniters were completely rusted and bound to the stove top, so I had to drill out all of the screws. Also, the burners were bound to the gas flues by mineral deposits and separating them was very difficult. Once I got the stove top up, I threaded the igniter wires to the... Read more
Replacement 10-32 machine screw for securing panels, brackets, and internal components. Ideal for replacing missing, stripped, or damaged hardware.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.
The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more
Replacement control knob for range burners. Installs on the control panel to adjust heat levels. Replace if cracked, broken, or missing from wear.
Took down model# and tried to match on website. However there were 5 sub-models. Had to look very carefully at the pictures of the parts. Also, there were 3 different size caps on the range. Ordered one small, 2 medium, and one large. Arrived in 48 hours. Perfect match. Placed on burners. Repair complete. Read more
8-18 x 1/2 inch mounting screw for securing drawer glides, brackets, and oven door components. Replace missing, stripped, or damaged screws during repairs.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
Replacement control knob for range burner or oven temperature. Installs on control panel. Replace when cracked, broken, or missing. Easy snap-on installation.
I ordered the knob and had it back and on my range before my pickles were ready to can. Loved the fantastic response time. Read more
Replace stained, rusted, or discolored cooktop grates with this complete grate kit. Restores a stable surface for pots and pans on your gas range.
Looked up the part number for replacing the burner dgrates in the 465 gas oven owner / parts manual. Plugged in the number in your easy to use website. Read over a few FAQs on the part I was ordering that answered my question of yes this is for a set of four. That was very helpful by the way. Ordered the parts and two days later they arrived to my door step. Read more
Replacement mounting screw for securing range panels, brackets, and internal components. Replace missing, stripped, or rusted screws to restore fit.
Fix burners that won't light or click repeatedly. This spark electrode creates the arc to ignite gas at your range burner. Moderate DIY repair.
We replaced the Igniters, Spark Module, Door Seal, and Knobs. Read more
Gas burners won't light or click erratically? A faulty spark module stops igniters from sparking. Moderate DIY repair—requires cooktop removal.
I first called an appliance service co. and they came the next day. They discovered it was the spark module but they did not have one in stock. They would call, when it was in, for a return visit. After a few days of waiting and lighting the burners by hand, I looked in the internet and found the AppliancePartsPros.com, and typed in my problem. They told me what I needed to do to fix it. I watched the video on replacing the part, and then ordered the part. It was here the next day. I took the... Read more