Shx4p05uc/O6 Parts

The Drain Hose is an OEM replacement part for Bosch dishwashers. It is responsible for draining water from the dishwasher tub at the end of each cycle. 

Causes of a bad drain hose can include cracks or ruptures developing over time due to repeated drainage and high temperatures, or blockages obstructing flow. 

Symptoms of a faulty drain hose include:

• Water remaining in the tub after cycles finish 
• Puddles or leaks found under or around the appliance
• Loud draining noises or sounds of water splashing inside the tub  
• Reduced overall washing or drying performance

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Base Panel is an OEM part for Bosch dishwashers. It serves as a protective cover for the bottom of the dishwasher, shielding internal components from debris, moisture, and damage while also contributing to the appliance's structural stability.

Causes of a bad base panel can include physical damage from impacts, corrosion due to prolonged exposure to moisture, or general wear and tear over time. A compromised base panel can lead to further issues by allowing dirt and water to infiltrate sensitive components.

Symptoms of a bad Base Panel include:

• Visible cracks or holes in the panel
• Water leaking from the bottom of the dishwasher
• Increased noise during operation
• Loose or misaligned panel

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Mounting Bracket Set is an OEM replacement part for Bosch dishwashers. Comprised of heavy-duty brackets and mounting fasteners, this set securely anchors the dishwasher to surrounding cabinetry.

Causes involve normal stress and fatigue of mounting points from years of use, and cycles of expansion and contraction.

Symptoms of faulty or damaged mounting brackets include:

• Loose installation allows appliance movement during operation
• Creaking or vibration noise emanating from cabinetry joints

This OEM Bosch replacement set is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Bosch dishwasher mounting bracket set includes both left and right-hand brackets used for side or top mounting.

The Tine Holder is an OEM replacement part for Bosch dishwashers. It secures the tines within the dishwasher, which in turn holds the dishes in place during the wash cycle. This component ensures that dishes remain stable and stationary, preventing movement that could lead to damage or incomplete cleaning.

Symptoms of a bad Tine Holder include:

• Tines becoming loose or falling out of place
• Dishes not being held securely, leading to movement or clattering during cycles
• Inability to adjust tines effectively for different dish sizes
• Visible damage or wear to the holder, affecting its grip on the tines

Causes for a malfunctioning Tine Holder can include physical damage from loading or unloading dishes, wear and tear from regular use, or material degradation over time.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Screw is an OEM part for Bosch appliances. This screw is designed for securing various components within Bosch appliances, ensuring that parts stay firmly in place during operation.  

Causes of needing replacement screws can include routine maintenance, repairs, or parts becoming loose over time due to vibrations or mechanical stress.  

Symptoms that you might need replacement screws include:

• Loose or wobbly components
• Missing screws
• Difficulty in maintaining the assembly of parts
• Visible wear or damage on the screws

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This On/Off Button is an OEM replacement part for Bosch dishwashers. It activates desired wash cycles and allows the selection of optional cycles and features. The button assembly features a durable and tactile feel for easy touch interaction with the control panel.

Causes of a bad button include mechanical wear and failed electronic components that result in response issues. Over decades of usage, internal connections may fail.

Symptoms of a bad button include:

• Failure to register presses or start a cycle
• Display errors or unresponsive controls
• Stuck buttons refusing release after presses

This OEM Bosch component is also compatible with Thermador, Gaggenau, and select Kenmore models.

The Heater Assembly is an OEM part for Bosch dishwashers. This part heats the water during the wash cycles, ensuring that dishes are cleaned effectively and sanitized.

Causes of a bad heater assembly can include electrical issues such as short circuits, mineral buildup from hard water, or wear and tear from regular use.

Symptoms of a bad heater assembly include:

• The dishwasher not heating water properly
• Dishes coming out dirty or not fully sanitized
• The dishwasher taking longer than usual to complete cycles
• Error codes related to heating issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle is an OEM replacement part for Bosch dishwasher doors. It allows for safe, ergonomic opening and closing of the dishwasher during each cycle. 

Causes of a bad handle can include normal wear and tear from frequent use. Exposure to moisture, chemicals, and temperature fluctuations may cause plastics to deteriorate faster than expected.

Symptoms of an inadequate handle include:

• Loose, unstable, or improperly secured fitment to door  
• Cracks, breaks, or bending of handle plastic/metal
• Difficulty grasping or maneuvering the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Side Trim Strip is an OEM replacement part for Bosch dishwashers. It serves as an aesthetic finishing piece that lines both sides of the dishwasher interior tub.

Causes of failure include normal wear from daily use, minor impacts during loading/unloading, and breakdown of plastic material over extended years.

Symptoms of a worn side trim strip can include:

• Cracks, peeling, or discoloration of the plastic trim material over time
• Gaps exposing the tub wall where the strip should cleanly cover
• Loose mounting allowing the trim to detach from its mounting points

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore dishwashers.

The Sump to Water Inlet Hose is an OEM replacement part for Bosch dishwashers. It efficiently transports water from the internal sump to the dishwasher's inlet valve during wash cycles. The flex hose comes with 2 o-rings. Approximate size: 19 5/8 inch.

Symptoms of a faulty sump hose include:

• Incomplete or ineffective washing from insufficient water transfer
• Hoses detaching from connections allow water to spill
• Reduced water pressure signs like slower fills or weak sprays
• Leakage where the hose connects to other components

Over many uses, mineral deposits can build inside the hose restricting flow. Physical damage like cracks or kinks also inhibits proper drainage. Replace your hose with this genuine Bosch part to restore maximal washing capacity.

Compatible with Thermador, Gaggenau, and some Kenmore models utilizing the same hose dimensions, this OEM hose ensures washing needs are consistently met.

This dishwasher door gasket seals the sides and top of the tub opening to keep water and steam contained during a cycle. Replacing a worn seal helps stop leaks at the door edges and restores quiet, efficient operation.

• Forms a watertight seal between the door and the tub perimeter
• Helps prevent dripping or puddles at the front corners and along the sides
• Maintains proper wash pressure, temperature, and noise isolation
• Replace if torn, flattened, brittle, or if moisture escapes around the door

• Disconnect power; if uninstalling the dishwasher, also shut off the water supply
• Open the door and pull the old gasket straight out of the channel
• Clean the groove; warming the new gasket in hot water can help relax bends
• Start at the top center and press the gasket fully into the channel without stretching; close the door to seat the seal and run a test cycle to check for leaks

The Pump to Sump Gasket is an OEM part for Bosch dishwashers. It serves as a seal between the dishwasher's pump and the sump, preventing water leaks during the washing cycle. This gasket is essential for maintaining the integrity of the dishwasher's internal components, ensuring that water flows where it's supposed to go without causing damage to the machine or your home.

Causes of a malfunctioning Pump to Sump Gasket can stem from normal wear and tear, as repeated exposure to water and detergent can degrade the gasket over time. Improper installation may cause the gasket not to seal properly.

Symptoms of a bad Pump to Sump Gasket include:

• Water leaking from underneath the dishwasher.
• Signs of water damage or corrosion around the pump or sump area.
• Unusual noises during operation, which may indicate water is seeping into areas it shouldn't.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Roller and Cable Assembly is an OEM part for Bosch dishwashers. This assembly includes the roller and cable, which work together to facilitate the smooth operation of the dishwasher door, allowing it to open and close effortlessly.

Over time, the roller and cable can wear out or become damaged due to regular use, friction, or accidental mishandling. If either component fails, it can affect the balance and movement of the dishwasher door, making it difficult to operate.

Symptoms of a bad roller and cable assembly include:

• Difficulty in opening or closing the dishwasher door
• A sagging or misaligned door
• Unusual noises when operating the door
• The door not staying securely in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This upper dishrack rail repair kit restores a secure, smooth glide for the upper rack by fixing loose or damaged rail mounting points on the dishwasher's tub sidewalls. Use it to bring back proper tracking and level support for the upper rack. What it does:

• Repairs damaged or detached upper rack rail mounts
• Secures the rails to keep the upper rack level and aligned
• Restores smooth sliding action of the upper rack
• Common symptoms: upper rack is hard to slide, tilts or drops on one side, or pops off the track

• One upper dishrack rail repair kit

• Disconnect power at the breaker and shut off the water supply before servicing
• Remove the upper rack to access the rail mounting points
• Use a suitable screwdriver/driver to install the repair kit at the rail mounts; do not overtighten
• Verify both rails are level and the rack moves freely before restoring power

The Dishrack Stop Kit is an OEM replacement part for Bosch dishwashers. This kit comes with both the front and the rear stop, these parts are installed at either end of the rails that the upper rack slides on. These stops help keep the rack on the rail, without this part the upper rack of your dishwasher will not slide in and out of your dishwasher properly.

Causes of faulty dishrack stops include wear of sliding surfaces through repetitive racking and unracking over extended use. Exposure to moisture in the wash chamber environment can accelerate degradation.

Symptoms of a bad dishrack stop kit include:

• Dishracks slipping during rotation potentially damage fine china
• Clearance issues where racks impact other interior components
• Potential tipping if stops fail to release rack load onto door interior

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

The Toe Panel Screw is an OEM replacement part for Bosch dishwashers. It secures the toe panel to the dishwasher.

Causes may involve normal wear and tear over time, improper installation, or damage from excessive force or impact. Replacing with this genuine OEM screw will reinforce your Bosch dishwasher's integrity for reliable performance.

Symptoms of a bad toe panel screw can include:

• The toe panel becoming loose, cracked, or removable
• Internal components visible underneath a loose toe panel
• Strange noises or vibration emanating from the toe panel area

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.