Sm2681220 Parts

This door switch detects when the door is fully closed and latched. Replacing a worn or stuck switch restores safe, consistent start/stop behavior and ensures the unit only runs with the door securely shut. What it does:

• Senses door position and signals the control to enable/disable operation
• Prevents the appliance from running with the door open
• Resolves issues such as: won't start despite power, stops when the door is jostled, "close door" message, or needing to press on the door to run
• Helps restore reliable cycle start and proper safety interlock function

• 1 door switch

• Disconnect power at the breaker before servicing
• Access the switch behind the door panel or latch area; note wire locations or take a photo
• Move wire connectors to the new switch one at a time; ensure terminals are fully seated
• Reassemble and test door closure and operation before returning to service

This transmission assembly drives the agitation and spin cycles by transferring motor power to the tub. Replacing a worn transmission helps restore proper wash action and spin performance.

• Converts motor rotation into the geared motion needed for wash (agitate) and spin
• Shifts between agitation and spin modes during the cycle
• Common failure signs: no or weak agitation; no spin or slow spin
• Other symptoms include loud grinding/rumbling, oil leaking from the center area, or the motor running while the tub doesn't move

• Disconnect power and water; move the appliance to a stable work area and use proper lifting support
• Access the drive assembly from below; support the tub/frame to prevent tipping
• Mark component orientation, remove fasteners and drive components as needed, and transfer any reusable parts from the original unit
• Tighten mounting hardware evenly, then run a test cycle and check for leaks

This vacuum bag is a genuine OEM replacement for select leaf blower/vacuum models. The bag attaches to the shaft and catches clippings, leaves, and other debris when the machine is used in vacuum mode. This canvas bag is made of durable material, but it can wear down with regular use and exposure to the elements. If the bag tears or wears thin and can no longer hold clippings, it will need to be replaced. In some cases, the carrying strap or zipper on the bag may break, which will also necessitate a replacement. This genuine OEM part can provide the exact fit for compatible blowers. This OEM bag replacement is manufactured to strict standards and will work with various machines from Craftsman, Weed Eater, Poulan, and Jonsered. This bag is made of heavy-duty fabric and requires no tools for installation. The velcro strap to secure the bag is not included with this listing, so if a replacement strap is needed it will have to be purchased separately. This bag is sold as an individual unit.

This is a blade for a walk-behind lawnmower. A new walk-behind lawnmower blade may be needed if the original is cracked, broken, or damaged in any way. The lawnmower blade can become damaged if it hits a rock, a curb, a landscape block, or other hard objects. It is essential to use extreme care and caution while performing care and maintenance or replacing the lawnmower blade as it can cause serious injury. Wear gloves to protect hands during the replacement process.This lawnmower blade is a genuine OEM Husqvarna part. It is sold individually. This specific lawnmower blade is compatible with walk-behind lawnmowers that are manufactured by the Husqvarna brand and the Jonsered brand.

This catalyst is a dishwasher replacement component that helps maintain cleaning performance by promoting proper detergent action during the wash cycle. Use when cleaning results decline or persistent film/spotting appears after runs. What it does:

• Promotes the chemical action of detergent for more effective soil removal
• Helps reduce cloudy film, spots, and residue left on dishes
• Works as part of the dishwasher's wash system to support normal cleaning cycles
• Fits into the appliance at the factory-designated location and interfaces with existing components

• Disconnect power (and water supply if required) before starting service
• Handle part carefully and reinstall using the original mounting hardware
• Do not modify the part; use only as designed to ensure proper function

An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.

A small replacement closure shim that helps align and secure a closure/trim piece on select appliances, restoring proper fit and reducing rattles, rubbing, or gaps for quieter, more reliable operation. What it does:

• Positions and supports the closure/trim so panels and doors close evenly.
• Helps stop rubbing, misalignment, or minor gaps that can cause noise or poor sealing.
• Serves as a non-electrical spacer/aligner where the original shim has worn or broken.
• Useful when cosmetic trimming or closure pieces feel loose or shift during use.

• Disconnect power to the appliance before starting any repair or accessing panels.
• Access location may require removing the related trim, panel, or door—refer to the appliance diagram or service manual.
• Handle small plastic parts carefully; align the shim before fastening to avoid breakage.

This block is a small mounting spacer used to secure and align components inside the appliance, helping maintain proper fit and operation. It replaces worn or broken mounting blocks to restore stable support and alignment. What it does:

• Provides a stable mounting surface or spacer between cabinet components
• Holds panels or assemblies in correct position to prevent rubbing or misalignment
• Helps reduce vibration or shifting of the connected parts during operation
• Commonly replaced when cracked, broken, or missing

• One mounting block

• High-level replacement; may require removing panels or trim to access mounting location
• Use appropriate hand tools and keep fasteners organized for reassembly
• Disconnect power before servicing any electrical components

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This tub seal kit replaces a worn or damaged tub gasket to restore the appliance's watertight seal and reduce leaks. It's a direct-replacement style kit used during tub or pump repairs to help maintain proper sealing. What it does:

• Replaces the tub sealing components that prevent water from escaping the tub area
• Helps stop common leak symptoms like puddling or water on the floor near the appliance
• Restores a secure seal after tub or pump disassembly to reduce moisture-related damage
• Useful when service shows visible gasket wear, cracks, or hardening

• Disconnect power and water supply before starting any repair
• Drain the appliance and remove any obstructing panels to access the tub area
• Follow the OEM service manual for disassembly and correct seal orientation

This engine control cable is responsible for controlling not only the engine speed but also the rotation of the blades. The engine control cable attaches to the control handles of the lawnmower. When the handle is pushed down, this will activate the engine control cable to power the engine and the blades. When the engine control cable is malfunctioning, the machine's engine and blade won't move no matter how hard the control handle is pressed. Replacing the engine control cable is a straightforward procedure that requires a nut driver and pliers. Wear gloves for protection. Husqvarna manufactures this brand-new engine control cable. It has Z-type bent ends and thick, durable rubberized exterior layer. There's a plastic clip, too. It is specifically made for Craftsman, Murray, Husqvarna, Weed Eater, Ariens, Poulan, and Poulan Pro lawnmower models. It approximately measures 61 inches and is sold individually.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

A replacement door screen that restores the barrier at the appliance door opening and helps keep debris out of the door cavity. Fits into the door assembly to maintain proper airflow path and appearance. What it does:

• Provides a protective mesh/cover at the door to help block lint, crumbs and other debris from entering the door cavity
• Helps maintain the designed airflow path through the door opening for proper appliance operation
• Replaces torn, clogged or damaged screens that cause visible debris buildup at the door
• Reduces risk of small objects getting stuck in the door area and contacting internal components

• Disconnect power to the appliance before beginning any service
• Remove the door or inner door panel per the appliance service instructions to access the screen
• Handle the screen gently to avoid bending or damaging mounting tabs; use approved fasteners if required