Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
The Upright Freezer Door Gasket is an OEM part for Frigidaire upright freezers. This gasket ensures a tight seal around the freezer door, preventing warm air from entering and cold air from escaping, thus maintaining the optimal freezing temperature.
Causes of a bad freezer door gasket can include wear and tear over time, exposure to harsh cleaning chemicals that can degrade the material, or physical damage from frequent use or mishandling.
Symptoms of a bad freezer door gasket include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This freezer is very old, considered getting a new one, but the cost was not inline with the short term warranties being offered now days. I figured the freeze still works and works great just needs a new gasket. This price of the gasket was hard to swallow however. It worked fine got it 2 days after I ordered it and replaced it the next day, Only tools needed was a phillips screwdriver, took about and hour. Very easy to do. Well satisfied, It works perfectly! Have done business with... Read more
My husband replaced the belt it was very simple just took the old one off and put the new one and.ordering the part on line was half the price of my local store and the part was here in just a couple of days. Read more
This tub-bearing split ring is an OEM replacement part designed for GE washing machines. This part measures 2 inches in diameter. It is positioned between the inner and outer tubs to hold the tub bearing inside the outer tub. The Tub Bearing Split Ring not only supports the tub/hub assembly but also ensures smooth operation.
Symptoms of a bad Tub Bearing Split Ring include:
Causes can be extended use over time which leads to wear and fatigue of the split ring material. Cracks or breaks can develop, reducing its stability and load-bearing capacity.
This genuine GE replacement part is also compatible with Hotpoint, RCA and some Kenmore front-load models.
NOTE: For the washer outer tub seal order WH02X10383.
I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all... Read more
The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.
Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.
Symptoms of a bad Knob Clip include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more
The Agitator Assembly is an OEM part for GE washing machines. This part moves clothes through the water and detergent during the wash cycle. This part ensures thorough cleaning by creating the necessary motion to distribute and cleanse laundry evenly.
Causes of a bad Agitator Assembly can range from wear and tear over extended use, to damage from overloading the washing machine, or even issues with the drive mechanism that powers the agitator's motion.
Symptoms of a bad Agitator Assembly include:
Replaced the broken agitator on my GE washer & couplin. Took a flat rope placed under the old agitator and with a stern jerk it popped off. Then a 7/16 socket set with a long extension took the bolt lose, and removed the couplin. Replaced the new couplin, with the new bolt tighten. Slide the new agitator into place with a stern push it snapped in place. Works perfectly. Thank you for the fast shipping. Read more
The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.
Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.
Symptoms of a bad Washer Top include:
I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more
The Agitator Hub is an OEM part for Frigidaire washing machines. It connects the agitator to the drive shaft, enabling the agitator to rotate and move clothes effectively during the wash cycle.
Causes of a bad agitator hub can include wear and tear from frequent use, exposure to harsh detergents or hard water, or damage from overloading the washer.
Symptoms of a bad agitator hub include:
The agitator stopped functioning and there was a squeaking sound occurring in agitation mode. I found that if I cranked down on the agitator cap, screwing in as hard as I could, the agitator would work briefly, then the cap would loosen and agitator stop moving. I removed the agitator cap, along with which came the agitator stud cap and a rubber washer/seal which was jammed up into the underside of the cap. I lifted out the agitator from the drum and inspected it and the hub best I could.... Read more
The Idler Pulley is an OEM part for Frigidaire dryers. It helps guide and maintain tension on the dryer drum belt, ensuring the drum rotates smoothly during the drying cycle.
Over time, the idler pulley can wear out due to friction and regular use, or it may become damaged from excessive strain or misalignment. If the idler pulley fails, the dryer drum may not rotate properly, leading to inefficient drying or a complete inability to dry clothes.
Symptoms of a bad Idler Pulley include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more
This agitator is a genuine Frigidaire part, sold individually. This agitator can be used as a replacement part for a washing machine or a washer/dryer combination appliance. This part rotates within the tub of the washing machine so that clothes and other items are tumbled around and fully cleaned.If an agitator has been subject to damage at some point in the standard lifespan of a washing machine, symptoms of damage will manifest in the form of a washing machine that will not agitate in a normal laundry cycle. If this is occurring, the agitator should be inspected for visible signs of damage, including punctures, scrapes, tears, and erosion to the material that could preclude it from serving its function. If the agitator seems damaged upon assessment, it should be removed and replaced with this genuine OEM replacement part before using the washing machine again.This is an OEM part sourced directly from the manufacturer. It is sold individually. This agitator is compatible with the following appliance brands: Frigidaire, Kenmore, Gibson, and Kelvinator.
I own several apartments with same washer/dryer combo. A couple months ago, one of my washers stopped agitating. I hired an Appliance Repair Company. They charged my $95 for agitator, $65 for hub and $120 for service call, plus tax for a total of $310. Oh, and it took them FOUR WEEKS to get the part in and fix my washer!. Something to do with "Frigidaire shipping issues". Last week I had another unit break with same problem. Ordered parts from AppliancePartsPros.com for $80, parts arrived... Read more
Took out the broken one and snapped the new one in , done. Read more
The trunnion is the hub that mounts the washer's inner tub to the drive shaft. Replacing a worn hub restores a solid, centered connection so the basket spins smoothly without wobble, slip, or grinding. What it does:
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more