Wer5730aaw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Frigidaire part

Drum Baffle Screw (Vane)

4.8 (9)

By: Frigidaire

Part Number: 131302800

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

Fastens the drum baffle/lifter (vane) to the rotating drum
Helps maintain proper tumble and load turnover
Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

What's included: One screw

Disconnect power before servicing; shut off gas
Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
Start all screws before final tightening to seat the baffle evenly

Do-It-Yourself Stories from Customers like You The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014

Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more

$17.95

Compare At:: $21.54
You Save:: $3.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Gasket

4.7 (3)

By: Frigidaire

Part Number: 137551901

This gasket is a sealing component used in select appliances. It fits between two mating parts to keep water or air where it belongs, helping prevent leaks and ensuring proper performance. What it does:

Forms a tight seal between components or housings
Helps prevent water drips, seepage, or air leaks at the joint
Maintains correct appliance performance by keeping moisture/airflow contained
Replace if the gasket is cracked, torn, flattened, or misshapen
Common signs include residue, moisture, or visible gaps around the seal

What's included:

1 gasket

Install notes:

Disconnect power; turn off the water supply before servicing
Note the orientation of the old gasket prior to removal
Clean and dry the mating surfaces; remove any old gasket residue
Seat the new gasket evenly without stretching; reassemble and check for leaks or proper seal

Do-It-Yourself Stories from Customers like You They are 20 year old Bruce A. • Folsom , CA • March 19, 2018

This was more maintenance than a fix. I replaced the door gasket and temp sensor on my dryer. Thought what the heck and it might work more efficiently. I also replaced the shocks on my front loading washer. That was a bit of a chore, but could not have done it without the video that showed how to replace them. The socket was the life saver. All is working just fine. Who knows maybe I'll get another 20 year out of them. Read more

$47.50

Compare At:: $56.05
You Save:: $8.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Dryer Timer (Cycle Control)

5.0 (4)

By: Frigidaire

Part Number: 5303297177

This dryer timer controls and advances the cycle you select, routing power to the correct components and shutting the dryer off at the proper time. Replacing a worn timer restores consistent cycle timing and end-of-cycle shutoff.

Controls cycle selection and duration
Advances the dial through the program and turns the dryer off at the end
Routes power to dryer components at the correct times during the cycle
Signs of a failing timer may include: cycle not advancing, running indefinitely, stopping early, or erratic timing

What's included: 1 dryer timer Install notes:

Disconnect power; for gas dryers, also shut off the gas supply
Remove the control knob and access the console to unmount the old timer
Label or photograph wiring; move terminals to the new timer one at a time to avoid miswiring
Align the timer shaft with the dial, secure the timer, and test operation before reassembly

Do-It-Yourself Stories from Customers like You Dryer not turning off. The timer slow in turning. Carl B. • Locust Grove , VA • September 27, 2021

Replaced Timer. Read more

$172.55

Compare At:: $203.61
You Save:: $31.06

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

Terminal Block

5.0 (12)

By: Frigidaire

Part Number: 134101400

The Terminal Block is an OEM replacement part for Frigidaire clothes dryers. It is the part the power cord connects to. This kit includes 3 screws and 3 terminals.

Causes of a bad terminal block can include damage from age, overheating from worn wires or loose connections, or improper installation during manufacturing.

Symptoms of a bad terminal block include:

The dryer not powering on
Intermittent heating issues
Loose, frayed, or damaged wires

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Frigidaire front load dryer was beeping and i could not get display to go off it actually dried clothes fine but in middle of night the beeping would start unable to get error codes Ronald B. • Haverhill , MA • September 11, 2015

Let me tell you that the videos made by AppliancePartsPros.com are what I needed most. They are simplified and complete. It turned out that because of a loose connection at the power terminal block, it over heated, melting the block and of course frying the wiring and distorting the connections. The erratic power supply must have damaged the control board. I ordered the terminal block and control board and although a little time consuming for a rookie, I got it working first time. I actually... Read more

$41.47

Compare At:: $49.35
You Save:: $7.88

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

Clip - Ball

5.0 (1)

By: Frigidaire

Part Number: 5303281020

For a complete drum bearing and shaft kit order 5303281153.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

$12.95

Compare At:: $15.54
You Save:: $2.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

Timer Knob

5.0 (21)

By: Frigidaire

Part Number: 134011703

Color: white. It measures about 3 inches in diameter.

Do-It-Yourself Stories from Customers like You Broken dryer knob Randy D. • Greenfield , TN • December 16, 2018

Replaced the broken knob with a new one. Read more

$47.95

Compare At:: $56.58
You Save:: $8.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Front Drawer Glide

5.0 (17)

By: Whirlpool

Part Number: WP3195546

Oven broiler drawer glide mounts to front of the drawer. For the rear drawer glide that mounts to the body order WP8053334.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You The right front drawer support/guide was broken off Kenneth P. • Albany , OR • March 10, 2019

The replacement part was identical, arrived quickly as promised, and took only a couple of minutes to install. Excellent service. Very happy with the end result and the whole process. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Hinge, Door

4.8 (9)

By: Whirlpool

Part Number: WP8053807

This hinge is for painted door only. For stainless steel door use WP8272822.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You The oven door would not close completely William R. • Emporia , KS • July 27, 2016

This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more

$75.63

Compare At:: $90.00
You Save:: $14.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (4)

By: Whirlpool

Part Number: WP4449809

This factory replacement screw secures panels, brackets, and covers in your appliance. Replacing missing or stripped hardware restores a solid fit, reduces vibration and rattles, and keeps components properly aligned during everyday use. What it does:

Fastens panels, trim, brackets, and internal components to the cabinet or chassis
Helps maintain alignment and reduce vibration or rattling noises
Replaces missing, rusted, or stripped screws discovered during service
Matches the OEM spec for locations where this part is called out on your model's diagram

What's included: 1 screw Install notes:

Disconnect power (and gas or water, if applicable) before servicing
Use the appropriate driver; start threads by hand to avoid cross-threading
Tighten snugly—do not overtighten to prevent stripping metal or plastic
Replace hardware one screw at a time to keep parts aligned

Do-It-Yourself Stories from Customers like You Broken outer glass on lower oven door James F. • Durham , NC • May 03, 2015

I recently shattered the outer glass on my Whirlpool oven door. (Side note for lesson learned...don't swat at a fly with a broom when its on the oven door. I didnt swing hard just a love tap but thats all it took ha ha) The toughest part of the fix was removing the broken glass as it had shattered into hundreds...no thousands of pieces. Thankfully it was taped on the inside and that held some of it together. I placed the door in our garbage can and put on a pair of gloves with a scraper to... Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Indicator Light Lens (Red)

5.0 (6)

By: Whirlpool

Part Number: WP3196068

This red indicator light lens covers the control-panel light opening. It restores a clean, finished look and keeps the status light easy to see while helping protect the opening from debris and accidental contact.

Covers and diffuses the indicator light for clear visibility
Fills the control panel opening for a finished, factory appearance
Helps shield the opening from dust, splashes, and contact
Common fixes: cracked, missing, loose, or discolored indicator lens

What's included: 1 red indicator light lens Install notes:

Disconnect power by unplugging the appliance or switching off the breaker before servicing
Access the control panel/backguard per your model's instructions
Release the old lens (tabs/retainer) and press the new lens into the opening until fully seated
Restore power and verify the indicator light is visible through the lens

Do-It-Yourself Stories from Customers like You Range "on" indicator lens broke Brian M. • Blackduck , MN • February 19, 2018

UNPLUGGED STOVE,REMOVED TOP CONTROL PANEL AND PUT NEW LENS IN. Read more

$8.36

Compare At:: $9.95
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Outer Door Glass

4.9 (15)

By: Whirlpool

Part Number: WP8053834

Color: White

Do-It-Yourself Stories from Customers like You Broken oven door glass and trim Heidi A. • Topeka , KS • December 05, 2014

Replaced glass and trim Read more

$139.25

Compare At:: $165.71
You Save:: $26.46

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Infinite Switch Knob (Wht)

5.0 (3)

By: Whirlpool

Part Number: WP9761962

The Top Burner Control Knob is an OEM part for Whirlpool ranges. This knob allows you to control the heat level of the stovetop burners, providing precise adjustments for cooking.

You should replace the control knob if it becomes damaged or worn out. Causes of a bad control knob can include frequent use, accidental impact, or exposure to high temperatures, which can result in the knob becoming loose, cracked, or difficult to turn.

Symptoms of a bad top burner control knob include:

Difficulty turning the knob
The knob not staying in place
Cracks or visible damage
Inconsistent heat levels when adjusting the burner

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Surface indicator light wouldn't go off John W. • Lyndonville , VT • January 23, 2015

Determined that the LF infinite control switch contacts for the burner indicator light were stuck closed. I replaced the control as well as the knob as the knob felt loose on the control. Read more

$21.95

Compare At:: $26.12
You Save:: $4.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Side Trim

4.8 (4)

By: Whirlpool

Part Number: WP8523167

Color: Biscuit. Right hand side. For left hand use WP8523173

Do-It-Yourself Stories from Customers like You I broke two trim pieces taking the oven door apart to clean it since i was ordering to side trim pieces i decided to replace the bottom door trim piece as well since it was bent and rusty Jennifer W. • Richmond , CA • July 19, 2016

The hardest part of this repair was a) realizing that the easiest way to clean the oven door pieces is to remove the whole door and b) figuring out how to put the oven door back on. Doing (b) is infinitely easier if you stick two allen wrenches into the holes in the door hinge, but these holes ONLY appear when the door is fully open. Prop the hinges open BEFORE you remove the door. As many posters online will tell you, it is easy to remove the oven door but hard to put it back on. It... Read more

$54.35

Compare At:: $65.22
You Save:: $10.87

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Frigidaire part

Motor Mounting Clamp

5.0 (2)

By: Frigidaire

Part Number: 134242400

The Motor Mounting Clamp is an OEM part for Frigidaire dryers. This clamp secures the motor in place within the dryer, ensuring it operates smoothly and remains stable during the drying cycles. The motor mounting clamp is essential for maintaining the proper alignment and function of the dryer motor.

Over time, the motor mounting clamp can become worn out or damaged due to constant vibration and movement. Accidental impacts or mishandling during maintenance can also cause the clamp to fail, leading to motor misalignment or instability.

Symptoms of a bad motor mounting clamp include:

Excessive noise or vibration during the drying cycle
Motor shifting or moving within the dryer
Reduced drying efficiency
The dryer not starting or stopping abruptly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Motor moving clamp stripped out Lois H. • Kansas City , KS • March 31, 2025

Replaced clamp with a new one Read more

$13.95

Compare At:: $16.60
You Save:: $2.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Terminal Block

4.0 (3)

By: Whirlpool

Part Number: WP8203546

This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.

Connects the supply conductors to the unit's internal wiring
Provides insulated posts to securely fasten and distribute power
Helps maintain tight, low-resistance connections
Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker

What's included: 1 terminal block Install notes:

Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
Photograph or label wire positions to ensure correct reassembly
Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed

Do-It-Yourself Stories from Customers like You Bad terminal block Michael M. • Ronkonkoma , NY • June 29, 2015

Replaced it with the part I got from you. Read more

$22.95

Compare At:: $27.54
You Save:: $4.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Wer5730aaw Parts

Drum Baffle Screw (Vane)

Gasket

Dryer Timer (Cycle Control)

Terminal Block

Screw, 1 Piece

Clip - Ball

Timer Knob

Front Drawer Glide

Hinge, Door

Screw

Indicator Light Lens (Red)

Outer Door Glass

Infinite Switch Knob (Wht)

Side Trim

Motor Mounting Clamp

Terminal Block