Wfg6320mcb50 Parts

This oven igniter lights the gas burner when the control calls for heat, restoring reliable ignition and consistent baking performance. Replace it if the oven won't light, preheats slowly, or the flame won't stay on. What it does:

• Provides the ignition source for the oven's gas burner during bake cycles
• A weak or failed igniter can cause no heat/no bake or intermittent ignition
• Can contribute to extended preheat times and burners that light then go out
• Visible cracks, burned spots, or damaged leads on the igniter are common failure signs

• One oven igniter

• Disconnect power and shut off gas before servicing
• Allow components to cool; handle the igniter's ceramic/element carefully to avoid damage
• Install in the original position; correct placement relative to the burner is critical
• After reassembly, restore utilities and test for proper ignition; leak-check any disturbed gas fittings

This panel forms the floor of the oven, sitting above the bake element or burner to shield it from spills and provide a smooth, stable surface. Replace a warped or damaged panel to help maintain proper heating and easier cleanup. What it does:

• Forms the oven floor above the bake element or burner
• Shields the heat source from drips and debris to help prevent scorching and odors
• Supports designed airflow and heat distribution in the cavity
• Common replacement signs: warped or dented panel, rust or chipped finish, smoke/odors from spills beneath the panel, or uneven baking results

• 1 oven bottom panel

• Disconnect power (and shut off gas supply for gas ranges) before servicing; allow the oven to cool completely
• Remove oven racks; release front fasteners or clips and lift the old panel out of the rear tabs (method varies by model)
• Seat the new panel into rear tabs, align the front edge, and secure as originally installed
• Verify the panel sits flat and clear of the bake element or burner before reassembling

The Electronic Control Board is an OEM part for Whirlpool ovens. This control board is essential for managing the oven's functions, including temperature settings, baking, broiling, and timing operations. It acts as the central brain of the oven, receiving input from the user and sending signals to various components to execute the desired functions.

Causes of a bad control board can include electrical surges, wear and tear from prolonged use, or damage from high temperatures. A faulty control board can prevent the oven from operating correctly, leading to various issues in cooking performance.

Symptoms of a bad oven electronic control board include:

• The oven not heating
• Error codes displayed on the control panel
• Unresponsive or malfunctioning buttons
• The oven shutting off unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Grate Set is an OEM part for Whirlpool ranges and cooktops. It consists of the grates that sit atop the cooktop surface, providing a sturdy platform for pots and pans during cooking. Note: Contains Left and Right grates. For Grate foot, order W10919249

Causes of a bad part can include exposure to high temperatures over time, impact or dropping, or general wear and tear from regular use.

Symptoms of a bad Grate Set include:

• Warping or bending of the grates
• Grates not sitting flush or level on the cooktop
• Cracking, chipping, or excessive wear on the grate surfaces
• Unstable or wobbly grates, posing a potential hazard

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Handle is an OEM part for Whirlpool ranges. This handle ensures a secure and comfortable grip for opening and closing the oven door, contributing to the range's ease of use and overall safety. 

Door handles on ranges can experience wear over time due to the high-heat environment, accumulation of cooking residues, or physical stress from regular operation. A damaged or loose handle can impair the functionality of the oven door, making it difficult to operate and potentially affecting cooking performance or safety.

Symptoms that may indicate the need for a new Door Handle include:

• A loose or wobbly handle that compromises the secure opening and closing of the oven door.
• Visible wear, cracks, or damage to the handle that affects its structural integrity.
• Difficulty in gripping or using the handle.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Surface Burner Ignitor is an OEM part for Whirlpool gas ranges. This part ignites the gas to create a flame on the burner, allowing for efficient cooking.

Causes of a bad ignitor can include wear and tear from regular use, electrical issues, or physical damage to the ignitor element.

Symptoms of a bad surface burner ignitor include:

• The burner not lighting or taking longer to light
• Clicking sounds without ignition
• Weak or inconsistent flame
• The smell of gas without ignition

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Light Bulb is an OEM part for Whirlpool ranges. It provides illumination inside the oven cavity, allowing you to easily monitor the cooking process. 

Causes of a bad bulb can include prolonged usage leading to burnout, manufacturing defects, or exposure to extreme temperature fluctuations within the oven.

Symptoms of a bad Light Bulb include: 

• Dimming or flickering light 
• Failure of the bulb to turn on 
• Uneven lighting within the oven cavity 
• Burnt-out or shattered bulb

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Screw for side trim.

Used for the front burner.

Color: White

Size: 8-18 x 1/2 inch.

The Control Knob is an OEM part for Whirlpool ranges and ovens. It allows the user to control the oven temperature or the heat level of the burners, making it an essential component for cooking precision.

Causes of a bad control knob can include regular wear and tear, physical damage such as cracking or breaking from impact, or the internal mechanism becoming stripped, which prevents it from engaging the control shaft properly.

Symptoms of a bad control knob include:

• Difficulty turning the knob
• The knob not staying in place
• Inconsistent temperature control
• The knob feeling loose or spinning freely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes lock latch motor and switch

Color: Black. Measures about 3 inches in diameter. For grey use WP98017461.

This leveling foot adjusts the appliance's height at the front to keep the cabinet stable and level. A properly leveled unit helps reduce vibration and noise and ensures doors, drums, and drawers operate smoothly.

• Supports the appliance and provides front height adjustment
• Helps correct rocking, vibration, and excessive noise from an unlevel appliance
• Can improve door alignment and smooth operation when the cabinet is leveled
• Common wear or damage can cause wobbling or difficulty staying level

• Unplug the appliance and, if applicable, turn off the water supply before servicing
• Tip or lift the unit carefully; use a helper to avoid injury
• Thread the new foot into the base and adjust until the cabinet is level and stable
• Tighten any applicable lock nut and recheck level after repositioning the appliance

The Control Knob is an OEM part for Whirlpool ranges and cooktops. It allows users to adjust the heat levels of the burners, providing precise control over cooking temperatures.

Causes of a bad control knob can include regular wear and tear, accidental impact causing cracks or breaks, or the inner mechanism wearing out, making it difficult to control the burner settings accurately.

Symptoms of a bad control knob include:

• The knob not turning or being difficult to turn
• The knob feeling loose or wobbly
• Inaccurate heat level adjustments
• The knob not staying in place or slipping

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.