Whirlpool Wrs325dab02 Parts

This ice door seals and controls the ice chute to keep cold air in and help dispense ice cleanly. Replaces a cracked or warped chute door to reduce ice jams and improve dispenser performance. What it does:

• Covers the ice chute to prevent warm air and moisture from entering the ice compartment
• Opens and closes to allow ice to pass into the dispenser or ice bin
• Helps reduce ice clumping and dripping that can cause jams or excess frost
• Commonly replaced when the door is cracked, broken, warped, or no longer seals

• One ice door

• Disconnect power to the appliance before beginning work
• Remove dispenser trim or freezer components as needed to access the chute; retain fasteners for reassembly
• Handle plastic parts carefully to avoid cracking; align hinge tabs before snapping into place

This mounting bracket secures internal components and panels so they stay aligned and stable during operation. It replaces a worn or broken bracket to restore proper support and reduce vibration or movement. What it does:

• Provides a secure mounting point for internal parts or panels
• Helps prevent rattling, misalignment, or loose panels during use
• Restores proper fit and stability when an original bracket is cracked or bent
• Works as a direct-replacement hardware piece where specified by the manufacturer

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; keep fasteners and orientation the same as removed
• If the bracket is attached to electrical components, handle wiring carefully and inspect connectors

Rod retainer clip secures a support rod or shaft to keep moving parts aligned and stable during operation. Replacing a worn or broken clip prevents rattling, binding, or components falling out and helps restore proper mechanical function. What it does:

• Holds a support rod or shaft in place to maintain alignment of moving components.
• Prevents rods from sliding out or shifting, which can cause rattling, binding, or misalignment.
• Replace if the clip is bent, cracked, corroded, or no longer grips the rod securely.
• Common symptom: loose or misaligned parts, unusual noises, or components that detach during use.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access may require removing panels, covers, or nearby components—follow the OEM service manual.
• Remove the old clip and carefully press or snap the replacement into place; avoid over-bending the clip.

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

Color: White. Size: 1 qt. can. Acrylic appliance paint.

The Reservoir is an OEM part for Whirlpool brand bottom-mount refrigerators. Located internally, it collects excess condensation and runoff from refrigerator components.

Causes of a bad reservoir can include cracks forming over time from the impact of falling debris or damage, as well as mineral scale deposits constricting drain openings.

Symptoms of a bad reservoir include:

• Standing water or flooding in the bottom of the refrigerator  
• Leaks or drips appearing around refrigerator connections
• Poor drainage and disposal of condensate waters  
• Musty odors developing from excess moist environments 

Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore refrigeration systems.

This wire shelf replaces a damaged or missing refrigerator shelf to restore stable storage and airflow inside the fresh-food compartment. Durable wire construction supports food containers while allowing cold air circulation. What it does:

• Provides a stable surface for storing food, containers and small appliances
• Allows proper air circulation to help maintain consistent cooling
• Replaces bent, rusted or missing shelves that cause items to shift or fall
• Restores original storage layout and usable shelf space

• One wire shelf

• Install by sliding shelf into existing cabinet rails or support slots; ensure it seats evenly on both sides
• No special tools typically required, but use caution to avoid pinching fingers when seating the shelf
• Inspect support rails or clips for wear; replace any damaged supports before installing the new shelf
• For safe operation, disconnect power only if servicing near electrical components; this shelf replacement normally does not require electrical work

The Glass Shelf is an OEM component specifically designed for Whirlpool bottom-mount refrigerators. Located inside refrigerator shelf panels, it forms a sturdy surface for storage organization.

This OEM Whirlpool replacement shelf restores dependable storage surfaces. Installed promptly to repair the damage, it prevents degradation of shelf structures for supporting various items.

Compatible also with some GE and Crosley models, this shelf maintains reliable organization. Protect storage functionality with an OEM glass shelf replacement when needed.

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling

This dispenser grille replaces a worn or damaged refrigerator dispenser face to restore a clean, finished look and proper dispenser function. The biscuit-colored grille matches corresponding trim and housing for a seamless appearance. What it does:

• Covers and protects the dispenser opening and internal dispenser components
• Keeps the dispenser area looking finished and hides mounting hardware
• Helps prevent drips and directs dispensed water/ice away from the cabinet
• Replaces cracked, broken, faded, or loose dispenser trim that affects appearance

• Disconnect power and turn off the water supply before starting repair
• Typically installs by removing the dispenser bezel or front trim; retain all fasteners
• Handle replacement part and surrounding trim carefully to avoid scratching
• Follow your model-specific service manual for exact disassembly and reassembly steps