Wm20232hs Parts

Removed the drum and replaced the bearings, bearing seal, seal between front and rear outer drum, shocks, and lid. It would be helpful to others to also go over an unit that has the controls in the rear as mine does. You simply unclip the lid in the front, take out the four screws for the soap dispenser and lift the lid up and do not have to remove it at all. Also, I found two screws at the bottom of the front panel below the filter and pump drain hose access that had to be removed before the... Read more

Replaced the front outer tub without removing the rear. Was pretty easy. Works great and no leak. Read more

I ordered the door from Appliance Parts Pros, which was on back order. When it arrived I had already removed the broken door. Please be sure to save your parts as the new door only came with one bushing for the door. Read more

I explained to the representative the piece that was missing on my washer. I had given him the model number etc. He was very helpful to make sure I got the right part he checked it three times just to make sure it was right. I received the part in a very timely matter. I would not hesitate to have them help me again. Im going to store them in my favorites if need part for an appliance again. Thanks again K. Jeanette Read more

Washer kept unbalancing, I found one of the shocks had lost it's pin. I replaced the three shock absorbers, springs and also water valves since the old ones were clogged. The top comes off very easily (two screws) to access the water valves. I used a hand truck to lay it on it's side and with the back removed I had access to everything without taking the front off. through the back and large access hole in the bottom, a major time saver. Read more

No luck, I did the easy fixes first by replacing the shock absorbers then the springs to no avail. Looks like the problem is in the much more expensive and difficult spider arm. Read more

After ordering the incorrect part from another site, I asked appliancepartspros.com which boot I needed. They answered immediately and I had the part within a day or two. My husband was able to find an easy to follow you tube instructional video on how to install it...and it was fixed in no time!! Read more

Remove spring clamp on door. Open front panel, pop out drain door, removed 5 screws total to take off front panel and one plug. Took off other spring clamp. Challenge was install to properly insert new seal. Thought it was the wrong part at first but with persistence it work great and is much better than previous design. Read more

Replaced bearings and seal and spider shaft.when I took it apart I accidentally cracked the outer tub assembly. I ordered one right away but the tub wouldn't arrive till January 23rd I decided to fix the crack with j b weld. It was a good fix and I ran3 loads already and works great. Read more

I replaced both tub bearings, spyder and seal. I also replaced the door gasket and hot water v add love do to having small leaks Read more