Wmh32519hz Parts

The Interlock is an OEM component specifically designed for Whirlpool microwaves. Located inside the door assembly, the interlock provides a safety function that prevents microwave energy from emitting when the door is opened. 

Composed of a magnet and lever switch beneath a metal shield, the interlock uses electromagnetic principles to immediately turn off microwave power if the door is opened during a cook cycle. This ensures safe access to hot food inside the cavity.

Causes of a bad interlock include worn contacts or weakening of the magnetic mechanism from sustained use over time. Physical damage or debris interfering with smooth lever operation are also possible causes.

Symptoms of a bad interlock include: 

• Microwave emission even with door slightly ajar  
• Faulty “door open” detection during cooking
• Inability to start new cycles until manually reset

This OEM part fits kitchen microwaves from Whirlpool, KitchenAid, Jenn-Air, and select Kenmore models.

This outer wrapping assembly is the coated black outer layer that fits around the dryer drum to protect the drum and improve airflow. It restores proper drum coverage and helps reduce rubbing, noise, and fabric snags. What it does:

• Replaces worn or damaged drum outer wrap that can cause rubbing or scraping noises
• Provides a smooth, protective surface that helps prevent clothes from catching on rough drum edges
• Helps maintain proper drum clearance and airflow for consistent drying performance
• Restores the dryer's appearance with a black, coated finish

• Disconnect power (and gas supply if applicable) before beginning any repair
• Access the drum per the dryer's service instructions; remove the drum to replace the outer wrapping
• Handle edges carefully and use gloves to avoid cuts; align the wrap evenly before securing

This thermistor is a refrigerator temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replaces a failed sensor to help restore accurate temperature readings and more consistent cooling. What it does:

• Senses internal refrigerator temperature and sends a variable resistance signal to the control board
• Helps the control system cycle the compressor and fans correctly for stable temperatures
• Commonly replaced when refrigerator runs too cold, too warm, or has irregular cooling cycles
• Can address temperature-error codes or defrost control issues when the sensor is faulty

• Disconnect power to the appliance before inspecting or replacing the sensor
• Handle the sensor and wiring harness carefully to avoid damage to the probe or connectors
• Install in the original sensor mounting location and secure wiring away from moving parts

This base is the appliance's lower cabinet section that supports internal components and helps stabilize the unit. It restores a solid foundation so the appliance sits level and protects internal parts from floor contact and debris. What it does:

• Provides structural support for the appliance's internal assemblies and controls
• Helps stabilize the unit and reduce excessive vibration or rocking
• Protects wiring, motors and other components from contact with the floor
• A damaged or cracked base can cause noisy operation, misalignment, or uneven sitting

• Disconnect power (and gas if applicable) before beginning any repair
• Follow the OEM service manual for disassembly and reassembly steps
• Replacement may require removing the cabinet and/or drum; having a second person helps with lifting and alignment
• Inspect and reuse original fasteners only if undamaged; replace any worn mounting hardware

This wire harness is the assembled wiring needed to replace a worn, damaged, or failed harness that connects appliance components and restores reliable power and signal paths. It helps return normal operation by replacing frayed or broken wires and connectors. What it does:

• Replaces the factory wiring assembly that links controls, switches, sensors and motors
• Restores electrical connections that can cause no-start, intermittent operation, or failed cycles
• Eliminates problems caused by loose, corroded, or damaged wires and terminals
• Prevents arcing or shorts from exposed or broken conductors when properly installed

• One complete wire harness assembly as shown

• Always disconnect power (unplug or shut off breaker) before servicing electrical components
• Verify routing and connector orientation match the original harness before securing
• Avoid stretching or pinching wires; secure with existing clips or fasteners
• If any connector or terminal appears damaged, replace the harness rather than attempt field repairs

This transformer provides the low-voltage power needed by the appliance's control and user-interface circuits so systems like the dispenser, ice maker, or control board can operate reliably. What it does:

• Steps down mains power to low-voltage power for control boards and user-interface components
• Restores power to dispensers, ice makers, timers or control modules that have lost low-voltage supply
• Commonly replaced when control circuits are unresponsive, displays are blank, or dispenser functions fail
• Matches OEM function for direct replacement of the failed transformer

• One replacement transformer

• Disconnect all power to the appliance before starting work to avoid shock hazard
• Handle wiring connections carefully; make secure electrical connections and restore grounding

This replacement light bulb restores clear, reliable illumination so you can see inside your appliance during use. It's a quick fix when the original lamp has burned out, gone dim, or started to flicker. What it does:

• Provides light in the appliance's designated lamp location
• Restores visibility for monitoring food and settings
• Common fix for no light, dim light, or intermittent/flickering light
• Helps address broken or blackened/burned-out bulbs

• 1 light bulb

• Disconnect power before servicing and allow the area/bulb to cool completely
• Remove any lens or cover as designed for your model; retain screws/clips
• Handle the bulb with clean, dry hands or gloves and do not overtighten
• Check the switch, socket, and wiring on the unit

The Fan Motor is an OEM part for Whirlpool microwaves. This fan motor is responsible for circulating air through the venting system. It works to evacuate fumes, smoke, and odors from the cooking area and direct them outside through the vent hood.

Causes of a bad fan motor can include excess dust or debris buildup hindering performance, bearing wear over time, or failure of electronic motor components.

Symptoms of a bad fan motor include:

• Inadequate or no air flow from the vent hood
• Strange noises coming from the vent system
• Reduced hood lighting levels
• Overheating or burning smells detected from the cooking surface or vent hood

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replacement plate that restores fit and finish for compatible Whirlpool appliances. Install to replace a cracked, warped, or cosmetically damaged plate and help maintain proper component alignment and appearance. What it does:

• Replaces a damaged or worn plate to restore the appliance's original coverage and appearance.
• Helps prevent gaps where food, grease, or debris can collect around the affected area.
• Maintains proper alignment and support for adjacent parts that rely on the plate for mounting or spacing.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools and follow the OEM diagram for correct orientation and fastener locations.
• Inspect mounting hardware and any gaskets; replace separately if worn or damaged.

The Interlock is an OEM part for Whirlpool microwaves. It is a safety device that prevents the microwave from operating unless the door is securely closed.

Causes of a failing microwave interlock can include wear and tear of moving parts over extended use. Physical damage from excessive force on the door or foreign debris caught in the locking mechanism can also disable proper function.

Symptoms of a bad interlock include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Interlock Switch is an OEM part for Whirlpool microwave ovens. It is an electrical component of the safety interlock system that prevents the microwave from operating unless the door is securely closed.

Causes of a bad interlock switch can be prolonged exposure to microwave energy, which can degrade electrical contacts over many years. Physical damage from excessive force on the door or foreign debris is also possible.

Symptoms of a failed interlock switch include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a complete microwave door assembly that restores the exterior door, latch area and viewing window so the oven closes and operates safely. Fits select Whirlpool-built countertop and over-the-range microwaves. What it does:

• Replaces a damaged or cracked door to restore a proper seal and viewing window
• Allows the door latch to engage so the microwave can start and run
• Fixes issues with visible damage, chipping, or bent door frame
• Improves safety by restoring the barrier between the cooking cavity and the user

• Disconnect power and, for over-the-range units, support & remove the unit per manufacturer instructions before replacing the door
• Handle glass components carefully; wear cut-resistant gloves to avoid injury
• Check door alignment and latch engagement after installation; adjust hinge screws as needed

This control panel is the user interface assembly that houses the buttons and display for selecting cycles and settings, restoring normal control and feedback for your appliance. It provides a direct replacement for a damaged, unresponsive, or visually worn console. What it does:

• Replaces the appliance's front console so buttons and display respond correctly
• Restores visible status indicators and cycle/program feedback
• Helps resolve symptoms like unresponsive buttons, missing display segments, or incorrect control behavior
• Works with the appliance's existing electronic controls to select and start cycles

• One replacement control panel assembly

• Disconnect power before attempting repair to avoid shock or injury
• Handle the display and touch surfaces carefully to avoid damage during installation
• Follow the appliance manufacturer's service instructions for panel removal and reassembly

This replacement mounting plate secures internal components so the appliance operates quietly and stays aligned. Replacing a damaged or bent plate helps stop rattling, prevent part movement, and restore proper fit between adjoining parts. What it does:

• Provides a stable mounting surface for nearby components and fasteners
• Prevents parts from shifting or vibrating during operation
• Helps eliminate rattling or noise caused by a loose or bent plate
• Restores correct alignment where the original plate was damaged or deformed

• One replacement plate

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Wear gloves and eye protection; edges may be sharp
• Use correct fasteners and torque to avoid bending the new plate;