Wrs321sdhvoo Parts

This ice door seals and controls the ice chute to keep cold air in and help dispense ice cleanly. Replaces a cracked or warped chute door to reduce ice jams and improve dispenser performance. What it does:

• Covers the ice chute to prevent warm air and moisture from entering the ice compartment
• Opens and closes to allow ice to pass into the dispenser or ice bin
• Helps reduce ice clumping and dripping that can cause jams or excess frost
• Commonly replaced when the door is cracked, broken, warped, or no longer seals

• One ice door

• Disconnect power to the appliance before beginning work
• Remove dispenser trim or freezer components as needed to access the chute; retain fasteners for reassembly
• Handle plastic parts carefully to avoid cracking; align hinge tabs before snapping into place

This replacement grille restores the appliance's front vent trim for a finished look and proper airflow. It matches the original shape and mounting points to keep the front area protected and looking right. What it does:

• Covers and protects front vent openings while providing an attractive trim
• Helps direct airflow and maintain intended ventilation pathways
• Replaces cracked, dented, or discolored grilles to restore appearance
• Fits in the original mounting locations for a direct-fit replacement

• One grille

• Disconnect power to the appliance before starting any work
• Remove any retaining screws or clips and lift the old grille out before installing the replacement
• Align mounting tabs and secure with the original fasteners; do not force parts
• If damaged fasteners are found, replace them with OEM-recommended hardware

Rod retainer clip secures a support rod or shaft to keep moving parts aligned and stable during operation. Replacing a worn or broken clip prevents rattling, binding, or components falling out and helps restore proper mechanical function. What it does:

• Holds a support rod or shaft in place to maintain alignment of moving components.
• Prevents rods from sliding out or shifting, which can cause rattling, binding, or misalignment.
• Replace if the clip is bent, cracked, corroded, or no longer grips the rod securely.
• Common symptom: loose or misaligned parts, unusual noises, or components that detach during use.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access may require removing panels, covers, or nearby components—follow the OEM service manual.
• Remove the old clip and carefully press or snap the replacement into place; avoid over-bending the clip.

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

Color: White. Size: 1 qt. can. Acrylic appliance paint.

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit

This genuine glass shelf provides a sturdy, easy-to-clean storage surface for your refrigerator, helping keep food organized and visible while maintaining proper airflow. Designed to fit in compatible fridge compartment shelving tracks. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf to restore usable storage space
• Provides a flat, stable surface for food containers, platters, and produce
• Tempered glass resists everyday impacts and is simple to wipe clean
• Helps maintain proper shelf spacing and airflow when installed in the correct position

• 1 glass shelf (matches listed part number)

• Handle tempered glass carefully and wear gloves to reduce cut risk
• Slide into existing shelf tracks or supports; no special tools typically required
• Verify correct shelf position and seating before loading with items
• If mounting hardware or supports are damaged, replace those parts before use

This glass shelf replaces a cracked, chipped or missing interior refrigerator shelf to restore usable storage space and stable support for food containers. Tempered glass provides a flat, easy-to-clean surface for organized refrigeration. What it does

• Provides a sturdy, level surface to hold food, beverages and containers inside the refrigerator
• Replaces damaged or missing shelves that can no longer support items or create safe storage
• Helps maintain organized storage and prevents items from falling between compartments
• Compatible with standard shelf supports and rails used in top- and middle-mount refrigerator compartments

• Remove all food and containers from the shelf before removing the old glass
• Handle glass with care; wear cut-resistant gloves and safety glasses when installing
• Slide shelf into existing rails or supports until fully seated; do not force or jam
• If shelf clips or rails are damaged, replace them before installing glass to ensure safe support

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling