Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Four-rod suspension kit that supports the washer tub and absorbs vibrations. Replace when rods are bent, broken, or when the tub sags or moves excessively.
Replaced suspension rods. Read more
Agitator barely moving or not churning clothes? This lower agitator fixes worn splines causing poor washing. DIY repair typically takes 5-10 minutes.
I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more
Noisy spin cycle or loose tub? This spanner nut secures the washer tub to the drive shaft. Requires spanner wrench for installation. DIY-friendly.
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more
Transmits power from motor to tub for spinning and agitation. Replace if squealing, squeaking, or washer won't spin. Confirm fit with your model number.
After watching the repair video, wife challenged that the repair done before dinner. Finished in 20 minutes. Yes, before dinner. Read more
Fix a washer that won't spin or agitate with this capacitor. Resolves F7E1 error code and motor running without drum rotation. Easy 20-minute DIY repair.
Bought one from you and replaced it. I friend did it for the family. Read more
Upper agitator stopped spinning or won't turn? This thrust spacer washer reduces friction between agitator parts. Simple DIY repair, under 30 minutes.
I had replaced the Agitator cams a couple of times already due to my brother-in-law overloading the machine which stripped the teeth off of the cams. I also noticed the agitator seemed to 'wobble' and made 'knocking' noises quite a bit. I reviewed the video on the Appliance Parts Pros web site, disassembled the agitator and cleaned everything up, which helped a little, but not enough. Figuring the agitator itself was worn out also, I looked up and ordered all the parts for the upper agitator on... Read more
Fix a washer that won't fill, fills slowly, or drips when off with a new water inlet valve. Most DIYers complete this repair in 20-30 minutes.
Installed new Water Inlet Valve. Read more
Secures control knobs to the panel on washers and dryers. Replace if the clip is broken, missing, or worn, causing knobs to fall off or sit loose.
I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I... Read more
Seals the agitator cap to prevent water leaks into the agitator assembly. Replace if you notice leaking during wash cycles. Verify fit with your model.
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more
Filters debris from water entering your washer and seals the hose connection. Replace if water fills slowly or screens are clogged. Confirm fit by model.
As a Mechanic, I did the common sense approach: INITIAL OBSERVATIONS & CHECKS: - Unplug Machine & check inlet water hose connections for leaks and signs of hose failure; - Remove back panel & inspect for water presence at all hose connections, pump, bottom of basket (bottom center of basket where the main motor, shaft bearing, and tub seal is located), dispensers, bottom of wash basket, water injector area, look everywhere where there is a hose connection and where water flows... - Inspect... Read more
Fix loud clicking or grinding noises during spin cycles with this washer transmission gear case. Moderately difficult repair takes 1-2 hours.
Bought new Transmission/gear box. Putting in the new one was easy. Taking the old one out was a nightmare. The corrosion on the spanner nut and drive block was awful. Ten years of VERY hard water and six kids made for a lot of corrosion and hard water crystallization. I do not own a spanner wrench. I am not sure having one would've helped. I tried pipe wrenches, needle nose vice-grips and many other ways. What eventually worked was taking a three inch ratchet extension, putting it... Read more
Fix a washer that won't fill, fills slowly, or leaks water into the tub when off. This water inlet valve replacement typically takes 10-15 minutes to install.
Replaced water inlet valve took all of 10 minutes and washer is filling great on hot and cold. Thanks to Appliance Parts Pros for getting me the part within 24 hours. I have a very happy customer. Read more
Washer tub seal prevents water leaks between outer tub and inner basket. Replace if you notice leaking from below. Confirm fit with your model number.
This repair was performed on a Whirlpool Cabrio clothes washer Model # WTW5640XW0 which has the digital electronic controls rather than the older style timer, electro/mechanical controls. This washer was made in 2010. Simply having the diagnostic programs on this machine is wonderful and they work remarkably well and led me to the shifter/rpm sensor component straight away. It was a simple replacement by tipping the washer onto its front and accessing through the bottom. The machine was put... Read more
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more
Fixes washer that won't start, advance cycles, or stops mid-cycle. This main control board restores cycle timing and sequences. Moderate DIY repair.
Replace the control boar Read more
Fix a washer that won't drain or shows F9 E1 error with this drain pump. Most DIYers complete this repair in under 30 minutes with basic tools.
Installed new pump Read more