Wtw5057lwo Parts

The Rear Panel is an OEM part compatible with Whirlpool washing machines. As the rear housing component, it protects internal mechanisms from debris while providing structure and stability to the cabinet. Its rigid design assists with even weight distribution to minimize vibrations. 

Symptoms of a bad rear panel can include:

• Warping or flexing of the panel material over time
• Cracks developing from pressure changes in the tub area
• Dents compromising the panel's integrity from heavy loads 

Causes of a bad rear panel washer stem from long-term use, with stress and strain accumulating from years of use. Agitator movement and unbalanced loads can warp the panel out of shape.

This OEM Whirlpool replacement rear panel helps restore the washer's protective barrier. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire shield is a molded protective cover that helps keep wiring routed and protected from heat, abrasion and moving parts. It prevents chafing and reduces the risk of shorts for a safer appliance operation. What it does:

• Covers and routes wiring to protect insulation from heat and friction
• Prevents wires from contacting sharp edges or moving components
• Helps stop intermittent shorts, arcing, or wiring damage that can cause odor or failures
• Maintains proper wire position to support consistent electrical connections

• One wire shield

• Disconnect power to the appliance before beginning any work
• Secure with existing clips or fasteners; do not force or modify the part
• If wiring insulation is melted or damaged, replace wiring/harness before reassembly

The Water Inlet Valve is an OEM part for Whirlpool front-loading washing machines. It is an electromagnetic valve that precisely controls water intake into the washer during designated points in the cycle. 

Causes of a bad water inlet valve can include mineral buildup disrupting valve function over many years of use. Exposure to varying water temperatures may also decrease lifespan.

Symptoms of a bad water inlet valve include:

• Inability to fully fill the washer tub as needed for optimal cleaning  
• Fluctuating or absent water levels lead to inefficient cycles
• Water pressure or temperature regulation is impacted 
• Valve seizing could result in flooding inside the washer

This OEM Whirlpool replacement valve restores precise fill control and pressure regulation. Compatible models include some Maytag, Amana, Jenn-Air, and select Kenmore machines. Replace yours to maintain peak washing performance.
 

The Control Board is an OEM part for Whirlpool washing machines. As the main controller, it regulates the operation of components like the pump motor, transmission, and clutch during all cycles. The control board uses sensors to monitor water levels and mechanical functions to advance cycles accurately.

Causes can be water damage, fluctuations in power supply, or general wear over extended usage.

Symptoms of a bad motor control board include:

• Washer not agitating or spinning clothes
• Inability to advance to different cycles
• Variable speed not working as expected
• Strange noises coming from mechanical parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Wash Plate is an OEM part for Whirlpool washing machines. Located inside the washer tub, the wash plate works with the agitator to gently push clothes up and down in the water during the wash cycle.

Due to the force of the agitator rubbing against clothes, wash plates can wear down over time and use. Microscopic cracks or chips in the plastic material allow contaminants to lodge underneath and cause abnormal vibrations and noises.

Symptoms of a bad wash plate include:

• Excessive shaking or vibrating
• Loud clunking or grinding noises
• Leaks around the tub seal
• Damage or cracks visible on the wash plate surface

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This agitator is the vertical post in your top-load washer that moves clothes through the wash water. Replacing a worn or stripped agitator restores proper wash action and helps improve overall cleaning performance.

• Transfers motion from the drive shaft to roll and move laundry through the tub
• Circulates water and detergent for effective soil removal
• Maintains load turnover during the wash cycle
• Common symptoms: no or weak agitation, loose/wobbly agitator, clicking during wash, or poor cleaning results

• Disconnect power and water; use caution around sharp cabinet edges
• Remove the agitator cap and retaining fastener; lift the agitator straight up
• Align the splines on the new agitator with the drive shaft, seat fully, and reinstall the fastener and cap
• Run a short wash to ensure smooth operation and no unusual noises

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

This lower wire harness routes power and signals between the control and the components beneath the tub on select 4.7/4.8-cu ft top-load washers. Replacing a damaged harness restores reliable connections and helps resolve intermittent motor or pump operation. What it does:

• Distributes power and control signals to lower-cabinet components
• Supports proper operation of the drive motor, drain pump, and related parts
• Typical symptoms: no spin or agitate, won't drain, intermittent operation, or visible heat damage/corroded connectors
• Match by part number for correct fit on 4.7/4.8-cu ft platform models

• 1 lower wire harness assembly

• Disconnect power and water supply before servicing
• Access the underside per your model (tilt the washer or remove panels as required)
• Transfer one connector at a time; route along the factory path and secure with existing clips/ties away from moving parts and sharp edges
• After installation, run a diagnostic or test cycle to normal operation

The Sound Shield is an OEM replacement part for Whirlpool washers. It is a sheet metal panel installed behind the tub that helps reduce noise and vibration during spin cycles. With absorptive insulation, the sound shield dampens noise produced internally. 

Symptoms of a damaged sound shield include:

• Excessively loud operation, especially during high-speed spins
• Rattles, clanks, or resonant noises from inside the washer  
• Potentially weakened structure allowing tub movement
• Causes of a damaged sound shield can include tears or dents sustained over many high-speed spin cycles. Constant vibration may cause stress cracks or loose rivets.

 It is also compatible with some  Whirlpool, Maytag, Amana, and Kenmore brands.

This bearing supports the washer drum and helps the tub spin smoothly, reducing noise and wear. Replace a worn bearing to restore stable rotation and prevent further damage to the tub and shaft. What it does:

• Provides a low-friction surface for the drum shaft to rotate on
• Keeps the drum aligned to prevent wobbling and uneven spinning
• Worn bearings can cause grinding, squealing, thumping, or excessive vibration
• A damaged bearing can lead to metal-on-metal contact and accelerate wear to other components

• One bearing

• Disconnect power and water supply before starting any repair
• Replacing the bearing typically requires drum disassembly; inspect seals and shaft for damage while access is available
• Use correct tools and replacement fasteners; do not force-fit parts

This wire harness is the main wiring assembly that connects controls and components, restoring electrical pathways for safe, reliable appliance operation. It replaces a damaged or frayed harness to help resolve intermittent or non-functioning electrical issues. What it does:

• Provides factory-style connections between control board and components for proper power and signal transmission
• Commonly replaces damaged, pinched, or burned wiring that can cause intermittent operation or loss of function
• Helps stop arcing, shorts, or erratic behavior caused by broken or loose connector leads
• Restores proper routing and secure connector fit to prevent future electrical faults

• One complete wire harness assembly

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock or injury
• Compare new harness to the old one for connector types and routing; take photos before removal to aid reinstallation
• Route and secure harness away from heat sources, moving parts, and sharp edges to prevent wear
• Do not modify connectors or splice wires unless instructed by manufacturer

This cabinet is the outer housing that protects and supports the appliance's internal components, restoring the unit's structural integrity and appearance. Replaces a bent, dented, or rusted outer shell to reduce vibration and air leaks. What it does:

• Provides the main exterior enclosure and mounting surface for internal parts.
• Restores proper panel alignment to stop rubbing, rattling, or uneven gaps.
• Helps maintain correct airflow by sealing the appliance body.
• Protects wiring and controls from damage and debris.

• Disconnect power and any fuel supply before starting work.
• Installation may require removing panels and transferring brackets or trim; keep original fasteners if reinstalling.
• Cabinet replacements often require two people for safe positioning and alignment.
• Refer to the appliance's service manual or OEM instructions for specific disassembly and reassembly steps.

This outer washer tub is the main exterior tub that surrounds the inner wash basket, helping contain water and support the tub assembly for dependable washing performance. It restores the washer's water-sealing and structural support. What it does:

• Houses the inner tub and helps contain wash water to prevent leaks
• Provides structural support for the tub assembly and associated seals/bearings
• Works with the inner basket, seals, and suspension to maintain proper wash action
• Can address symptoms such as visible leaks from the tub area or excessive tub movement/noise

• One outer tub (single piece as shown)

• Refer to your model's service manual for step-by-step removal and reassembly and follow OEM torque and seal replacement guidance
• Replace any worn seals, gaskets, or mounting hardware during installation to ensure a proper water-tight fit
• Disconnect power and water supply before beginning service to avoid shock or flooding
• Inspect those components and replace as needed

This genuine replacement screw secures components in compatible Whirlpool appliances, restoring proper fit and preventing rattles or loose panels. Use it when original fasteners are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or small components to maintain structural stability
• Replaces missing or worn screws that cause vibration, rattling, or loose parts
• Restores secure connections after repairs or part replacements
• Helps prevent further damage by keeping parts properly aligned

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and hand-start the screw to prevent cross-threading
• Keep small parts away from children and pets during installation