Wtw8420 Parts

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

• Fastens panels, brackets, or small components in place
• Replaces missing, stripped, or damaged screws that cause loose parts
• Helps stop rattling, vibration, or misaligned panels
• Restores secure connections after repairs or part replacement

• One mounting screw

• Unplug the appliance or disconnect power before starting work
• Use the correct screwdriver bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Keep removed hardware organized so you can reuse existing screws when applicable

A replacement dispenser bezel that restores the dispenser opening's appearance and helps the dispenser door and controls sit flush. Fits the dispenser area and keeps the front trim looking clean and functional. What it does

• Replaces a cracked, chipped, warped or missing dispenser bezel
• Restores proper alignment and trim around the dispenser opening
• Improves appearance when the original bezel is stained or damaged
• Helps prevent small items or spills from catching behind the trim

• Disconnect power to the appliance before beginning any work.
• Small trim retains and mounting tabs may be fragile; handle carefully.
• Basic hand tools are typically required; follow model-specific instructions for removal and installation.

This name plate is the decorative centennial badge that restores the appliance's exterior appearance and branding. It replaces a missing, damaged, or faded badge to keep the unit looking factory-finished. What it does

• Restores the appliance's exterior badge for a like-new appearance
• Replaces badges that are cracked, scratched, peeling, or discolored
• Helps identify the appliance style when the original emblem is missing
• Cosmetic part only — does not affect appliance operation

• One name plate

• For best results, clean the mounting area and remove dirt or wax before installation
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If access behind trim is required, unplug the appliance or disconnect power before removing panels
• Follow OEM instructions for removal and reinstallation to avoid damaging clips or surrounding trim

The Motor Rotor is an OEM part for Whirlpool electric top-loading washers. Located internally at the center of the washer basket, it transmits power from the motor to spin water from clothes during extraction cycles.  

Symptoms of a faulty motor rotor include: 

• Slow or inefficient spin that leaves clothes dripping wet   
• Abnormal vibrations felt from the tub during spin
• Premature winding motor sounds due to rotor imbalance

Causes involve normal wear from years of moving wet laundry loads. Damage could also occur from objects left in pockets that damaged the rotor during spin.

This OEM replacement is compatible with additional Whirlpool, Kenmore, and Maytag top-loading washers.

The Dispenser Tray is an OEM part for Whirlpool top-loading washing machines. Located inside the detergent drawer, this durable molded tray is designed to hold liquid detergent packs safely in place during cycles. Its size and dimensions facilitate convenient single-dose placement.

Causes for replacement may include cracks, warping, or discoloration due to mineral buildup affecting the tray structure over time.

Symptoms of a faulty tray involve:  

• Difficulty loading or securing detergent packs properly   
• Leaks or spills of detergent inside the drawer compartment
• Off-center or displaced detergent dosing during the wash

This OEM Whirlpool replacement is compatible with select Whirlpool, Maytag, and other major brand front-loaders.

The Wash Plate is an OEM part for Whirlpool washing machines. Located inside the washer tub, the wash plate works with the agitator to gently push clothes up and down in the water during the wash cycle.

Due to the force of the agitator rubbing against clothes, wash plates can wear down over time and use. Microscopic cracks or chips in the plastic material allow contaminants to lodge underneath and cause abnormal vibrations and noises.

Symptoms of a bad wash plate include:

• Excessive shaking or vibrating
• Loud clunking or grinding noises
• Leaks around the tub seal
• Damage or cracks visible on the wash plate surface

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

This agitator is the vertical post in your top-load washer that moves clothes through the wash water. Replacing a worn or stripped agitator restores proper wash action and helps improve overall cleaning performance.

• Transfers motion from the drive shaft to roll and move laundry through the tub
• Circulates water and detergent for effective soil removal
• Maintains load turnover during the wash cycle
• Common symptoms: no or weak agitation, loose/wobbly agitator, clicking during wash, or poor cleaning results

• Disconnect power and water; use caution around sharp cabinet edges
• Remove the agitator cap and retaining fastener; lift the agitator straight up
• Align the splines on the new agitator with the drive shaft, seat fully, and reinstall the fastener and cap
• Run a short wash to ensure smooth operation and no unusual noises

The Stator is an OEM component specifically designed for Whirlpool washing machines. It is the stationary part of the washer motor that induces a magnetic field, causing rotation in the rotor and driving the agitator or basket movement. 

Symptoms of a bad stator include: 

• The washer not agitating or spinning clothes during cycles  
• Loud grinding or knocking noises from the motor area
• The washer needs to be reset frequently
• Slow or inconsistent agitation or spin speeds

Causes of a stator failing include normal wear and tear of internal electric components over many usage cycles. Replacing with this genuine Whirlpool part helps maintain dependable washing performance.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing worn internal parts like the stator proactively prevents potential future washer motor issues.

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

The Dispenser is an OEM part for Whirlpool washing machines. This part automatically dispenses the right amount of detergent at the optimum time in the cycle.

Causes of a faulty dispenser can include clogged or damaged dispenser tubes from mineral buildup, or a worn dispenser drawer that no longer opens fully.

Symptoms of a bad dispenser include:

• Residual detergent left in the drawer after cycles
• Stained or dirty dispenser area from leaks/overflows
• Incomplete or insufficient cleaning from improper detergent dosing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so you get reliable filling and stop leaks when the original valve fails. Installs as a direct replacement to restore proper water flow. What it does:

• Controls water supply to the ice maker and door dispenser; solenoids open/close flow on demand.
• Stops water when the dispenser or ice maker is not calling for water.
• Common signs it needs replacement: no water from dispenser, slow or no ice production, continuous leaking or dripping, or the refrigerator runs but won't fill the ice mold.
• Helps prevent water damage by shutting off flow when the valve closes.

• Turn off power and shut off the water supply before starting; relieve line pressure by running the dispenser briefly.
• Inspect supply tubing and fittings for damage; replace any brittle or cracked lines.
• Tighten connections evenly and check for leaks after restoring water and power.