Wtw8540bwo Parts

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

• Connects hot and cold water faucets to the washer's inlet valves
• Replace if hoses are leaking, cracked, bulging, or kinked
• Can help address slow filling caused by restricted or kinked hoses
• Useful when installing or relocating a washer

• Unplug the washer and shut off both water supply valves before starting
• Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
• Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
• Restore water and power; run a fill test and check all connections for leaks

Hinge bearing that supports the appliance door hinge for smooth, stable movement and helps prevent door sag or noisy operation. Replacing a worn bearing restores proper door alignment and reduces hinge wear. What it does:

• Provides a low-friction pivot for the door hinge so the door opens and closes smoothly.
• Prevents binding, grinding, and uneven door movement caused by a worn hinge pivot.
• Helps maintain proper door alignment to avoid gaps or incomplete latching.
• Common symptoms: door hangs, squeaks, clicks, binds, or feels loose at the hinge.

• Always disconnect power (and water for dishwashers) before beginning repairs.
• Access typically requires removing the door or hinge trim—keep fasteners organized.
• Replace only with the matching bearing; test door operation before reassembly.

This machine screw secures components in place to maintain proper alignment and stability during appliance operation. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Provides a secure mechanical fasten for panels, brackets, or internal assemblies
• Helps correct rattling, vibration, or loose-fitting parts
• Useful when an original screw is stripped, corroded, or lost
• Sized to match 8-18 thread applications in compatible units

• Disconnect power and shut off water or gas before servicing
• Note original screw location and orientation for correct reassembly
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace any damaged clips or mounts the screw engages

This leveling foot assembly supports the base of your appliance and provides height adjustment. Leveling the cabinet reduces rocking and vibration and helps doors and components align and seal correctly for smooth, quiet operation. What it does:

• Threads into the base/frame to set height and stabilize the cabinet
• Levels the appliance on uneven floors to reduce wobble and vibration
• Helps maintain proper door alignment and sealing
• Replace if the foot is missing, cracked, stripped, or seized

• 1 leveling foot assembly

• Disconnect power and, if applicable, shut off water before servicing
• Carefully move or tilt the appliance with a helper to access the foot; support it securely
• Unthread the damaged foot; thread the new foot by hand to avoid cross-threading, then adjust with a wrench as needed
• Verify level front-to-back and side-to-side; confirm the unit sits stable before returning to service

This recirculation hose routes wash water from the dishwasher's circulation pump back into the spray system. Replacing a cracked or leaking hose helps restore strong spray performance and prevents water from escaping under the unit.

• Carries circulating wash water between the pump and the tub/spray system during the wash cycle
• A damaged or clogged hose can cause leaking, weak spray, or poor cleaning results
• Common signs include water on the floor, residue on dishes, or visible cracks/kinks in the hose
• Restores proper wash circulation and helps prevent leaks

• Disconnect power and shut off water supply before servicing
• Pull the dishwasher out to access the base; place a towel or pan to catch residual water
• Note hose routing; transfer and correctly position existing clamps/fittings
• After installation, run a short cycle and check all connections for leaks

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Size: 10-24 x 3/8 inch.

This right-hand lid hinge secures and guides the appliance lid for smooth, controlled opening and closing—restoring proper alignment and preventing the lid from sagging or binding. What it does:

• Supports the lid on the right side and maintains alignment during use
• Guides smooth opening and closing to prevent sudden drops or catches
• Replaces cracked, bent, or worn hinges that cause uneven gaps or misalignment
• Helps restore lid stability so it stays open or closes evenly

• Disconnect power before beginning any repair and work on a dry, stable surface
• Support the lid while removing and installing the hinge to prevent injury or damage
• Typical installation uses common hand tools (screwdriver/socket); follow OEM diagram for correct fastener locations
• Inspect mounting screws and mating surfaces; replace any damaged hardware for a secure fit

5 foot. Package of 2.

Screw for control panel.

This drain hose coupling connects two sections of the washer drain hose to restore a watertight path for wastewater, helping prevent leaks and restore proper draining. What it does:

• Joins two drain hose sections or connects hose to a mating outlet for secure water flow
• Seals the hose connection to reduce leaks at the joint
• Restores proper draining when a damaged or missing coupling causes slow drain or leakage
• Designed to fit the OEM hose profile for a snug, stable connection

• One drain hose coupling as shown

• Turn off power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean cut if required for proper fit
• Push hose ends fully onto the coupling and secure with manufacturer-recommended clamps

Color: White

This tub ring secures the washer's outer tub assembly and helps maintain proper drum alignment for quieter, more reliable operation. It restores fit between the outer tub and surrounding components to reduce wobble and noise. What it does:

• Holds the outer tub in position and helps stabilize the spinning drum
• Helps maintain proper clearance between the tub and cabinet to reduce rubbing or scraping noises
• Can prevent excess movement that can cause vibration or uneven spinning
• Commonly replaced when torn, cracked, or deformed from wear or impact

• Disconnect power and water supply before starting any repair
• Inspect surrounding seals, gaskets, and mounting hardware; replace if damaged
• Handle plastic components carefully to avoid cracking during installation

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

This part is a replacement outer tub. This part can be used to replace broken or defective outer tub in a variety of dryer models. The outer tub is critical for proper dryer functionality as it's what holds water that is emitted from materials or clothes as they dry. If this part is corroded, cracked, dented, bent, or otherwise rendered ineffective, the user may notice leaking, clothes not being dried properly, or other issues. Thus, the outer tub will need to be replaced. Before any repairs are made, the appliance should be entirely disconnected from the power sources and work gloves should be worn.This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. As an authentic replacement part, this outer tub is suitable for use on dryer manufactured by Whirlpool, Maytag, Kenmore, and some other brands. This part is sold individually.

This siphon break kit prevents wastewater from siphoning back into the dishwasher, helping keep the tub and dishes clean and reducing drainback issues. Fits the dishwasher drain assembly to restore proper draining function. What it does:

• Stops backflow by breaking the siphon effect in the drain line
• Works with the dishwasher drain hose and pump to maintain one-way drainage
• Helps address symptoms like water remaining in the tub, partial drains, or water backing into the tub
• Supports proper drainage to reduce odors caused by standing water

• One siphon break kit

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect the drain hose routing and secure the siphon break at the recommended height per the dishwasher's service instructions
• Use basic hand tools; hose clamps or fasteners may be required