Inlet Valve Parts

The Inlet Valve Assembly is an OEM component specifically designed for LG front-load washers. Located near the water supply hose connection, the inlet valve controls the flow of water entering the washer tub.

Symptoms of a bad inlet valve assembly include:  

• Slow or incomplete fills during wash cycles  
• Water leaks when the washer is off or idle
• Fluctuations in water levels inside the tub
• The valve becomes difficult to turn on or off 

Causes of failure can be mineral buildup clogging internal ports, worn seals no longer tightly closing the passageway, or damaged electronics affecting valve operations.

The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards. 

Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time. 

Symptoms of a bad filter ball include:

• Dirty wash water that fails to fully sanitize dishes
• Cloudy rinse water that leaves behind streaks and residue 
• Excess food debris collecting in drainage areas 

This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.

The Valve is an OEM replacement part for Whirlpool washing machines. It is a component that regulates the water coming into the tub.

Causes of failure generally include wear and tear over time, mineral buildup affecting valve operation, or damage from freezing.

Symptoms of a bad valve can include:

• Failure to fill or drain the tub properly
• Abnormal water levels during functions
• Inability to switch between temperature settings
• Water leaks from the valve area

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Check Valve Flapper is an OEM replacement part for GE dishwashers. It is a small but crucial component located within the water inlet valve assembly. The check valve flapper regulates water flow into the dishwasher, allowing water to enter during the fill cycles but preventing backflow when the water is drained. 

Causes of a bad check valve flapper can include wear and tear over time, mineral buildup that causes sticking, or damage to the flapper itself. This prevents the flapper from opening and closing as intended.

Symptoms of a bad check valve flapper include:

• Slow or incomplete filling of water 
• Dripping or leaking water from the inlet area
• Error codes related to water issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models. 

The Triple Water Valve is an OEM part for GE washing machines. This part controls the flow of water into the washer, allowing for the precise mixing of hot, cold, and warm water necessary for different wash cycles.  

Causes of a bad triple water valve can include mineral buildup or blockages from debris, electrical issues such as faulty solenoids, and wear and tear from frequent use.  

Symptoms of a bad triple water valve include:

• The washer not filling with water or filling very slowly
• Incorrect water temperature during wash cycles
• Leaks from the valve area
• The washer not advancing through cycles properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Valve is an OEM part compatible with Whirlpool washing machines. This part regulates the flow of water into the washing machine tub during various cycles, such as fill, rinse, and spin.

Causes of a faulty Valve can include mineral buildup or debris obstructing the valve, worn or damaged internal components, or issues with the valve's solenoid or electrical connections.

Symptoms of a bad Valve include:

• Failure to properly fill the tub with water
• Leaks or water drips around the valve area
• Potential flooding or water damage due to a stuck valve

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Hot Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of hot water into the washing machine during the wash cycle, ensuring that the machine receives the correct amount of hot water for optimal cleaning performance.

Common causes of a bad inlet valve include wear and tear over time, clogging from mineral deposits or debris, and electrical failures that prevent the valve from opening or closing properly.

Symptoms of a bad Hot Water Inlet Valve include:

• The washing machine not filling with hot water
• Water leaking from the valve or connections
• The machine filling slowly or not at all
• Error codes related to water flow issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Inlet Valve is an OEM component for Frigidaire washing machines. It resides within the base and precisely controls water intake into the washer tub. 

Symptoms of a bad water inlet valve include:

• Failure to fill the tub with water for cycles  
• Residual water leaks at the valve area
• Inability to select fill levels on newer machines
• Restricted or no water flow into hoses

Causes may be mineral sediment buildup inhibiting valve function over time, worn internals allowing leaks, or electronic issues in smart valves.

Compatible with units including Electrolux, Gibson, and select Kenmore models as well. Renewed laundry performance awaits with this vital component repair.
 

The Inlet Valve is an OEM part for Whirlpool refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady supply for both functions.

Causes of a bad inlet valve can include mineral buildup from hard water, wear and tear over time, or electrical failures that prevent the valve from opening or closing properly.

Symptoms of a bad inlet valve include:

• No water or ice production
• Leaks around the valve area
• Low water pressure from the dispenser
• The ice maker not filling with water

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Water Valve Assembly is an OEM replacement part for GE dishwashers. It consists of multiple valves that work together to control water flow during different stages of the wash cycle.

Causes of a bad water valve assembly can include mineral buildup restricting flow, cracks developing in valve housings allowing leaks, and failure of components like solenoids or inlet/outlet valves.

Symptoms of a faulty water valve assembly include:

• Abnormal sounds or squealing during filling
• Inability to properly fill or wash dishes
• Slow, inconsistent, or no water circulation
• Water leaks in the valve area

This GE replacement is compatible with additional brands like Hotpoint, Profile, and select Kenmore models as well.

The Water Inlet Valve is an OEM replacement part for LG refrigerators. It is a solenoid valve that controls the flow of water to the ice maker and water dispenser. The water inlet valve is typically located behind the refrigerator, near the water line connection.

Clogging or debris buildup in the valve can prevent the valve from opening or closing properly. Wear and tear over timeof the valve may simply wear out over time and need to be replaced.

Symptoms of a bad water inlet valve include:

• No water to the ice maker or water dispenser.
• Leaking from the water inlet valve area.
• Noisy water inlet valve.
• Ice maker not producing ice.

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the fill cycles. The valve opens to allow water to enter the tub and then closes once the desired water level is reached, ensuring the proper amount of water is used for washing.

Causes of a bad water inlet valve can include mineral deposits and sediment buildup, electrical issues such as faulty solenoids, or wear and tear from frequent use.  

Symptoms of a bad water inlet valve include:

• The washer not filling with water
• The washer filling slowly or not stopping filling
• Leaks from the valve area
• Inconsistent water levels during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Potential series changes might cause the valve to be part number 12002158. Make sure to verify your model number for the correct part.

The Water Valve is an OEM part for Frigidaire laundry centers. It's a part that controls the flow of hot and cold water into the washing machine. By opening and closing at the appropriate times during the wash cycle, this valve ensures that clothes are washed in the correct temperature settings, optimizing cleaning performance and fabric care. 

Causes of a faulty Water Valve include mineral build-up from hard water blocking the openings, wear and tear causing leaks or malfunctions, and electrical problems such as faulty solenoids disrupting operation signals. 

Symptoms of a malfunctioning Water Valve include:

• Water not entering the washing machine, leading to dry wash cycles.
• Water entering the machine too slowly, indicating a partial blockage.
• Water leaking from the valve when the machine is off, suggesting a failure to close completely.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Water Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during the wash and rinse cycles.

You should replace the water valve if it becomes defective or worn out. Over time, mineral deposits can build up, or the internal components can fail, leading to improper water flow. This can affect the dishwasher's performance and water efficiency.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Low water pressure during the cycle
• Leaking water from the valve area
• Dishes remaining dirty due to insufficient water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Water Inlet Valve is a reliable component designed to ensure your washing machine receives the correct amount of water for each cycle. This genuine OEM part guarantees compatibility with a wide range of Samsung washer models, providing a secure and precise fit. By replacing a faulty inlet valve with this high-quality part, you can restore your washerGÇÖs functionality and improve its performance. The valve effectively controls the flow of water into the appliance, preventing leaks and ensuring efficient operation. Its durable construction ensures long-lasting performance, reducing the need for frequent replacements. Installing the Washer Water Inlet Valve is straightforward, allowing you to quickly get your washer back to optimal working condition. Choosing this genuine OEM part means you are investing in the reliability and efficiency of your Samsung washer, enhancing your laundry experience and maintaining the longevity of your appliance.

The Water Inlet Valve is an OEM part for Whirlpool refrigerators. It controls the flow of water into the refrigerator, supplying water to the ice maker and water dispenser.

Common causes of a faulty water inlet valve include mineral buildup from hard water, electrical malfunctions, or general wear and tear over time.

Symptoms of a bad Water Inlet Valve include:

• No water or ice being dispensed
• Leaks from the back of the refrigerator
• Low water pressure from the dispenser
• The ice maker not filling with water

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.