Inlet Valve Parts

This water inlet valve regulates the flow of household water into the dishwasher at the start of each cycle. Replacing a weak, clogged, or leaking valve restores proper fill level for reliable performance and helps prevent leaks or fill errors.

• Opens to allow the correct amount of water into the tub; closes to stop the fill
• Common fix for dishwasher not filling or taking too long to fill
• Can resolve low water level that leads to poor cleaning results
• May stop water from seeping into the tub when the dishwasher is off
• Replace if the valve body leaks or the inlet screen is damaged/clogged

• Disconnect power and turn off the dishwasher's water supply before servicing
• Access the valve behind the lower toe/kick panel; place a towel to catch residual water
• Note wire and hose positions and move them to the new valve one-for-one
• Restore water and power, then run a fill to check for leaks and proper operation

This water fitting connects refrigerator water lines to keep the dispenser and icemaker supplied. It replaces a worn or leaking connector so your fridge can maintain a reliable, drip-free water path.

• Joins water tubing for the dispenser/icemaker circuit
• Helps resolve leaks at the connector or along the water line
• Can restore weak/no water flow caused by a damaged fitting
• Maintains a secure, food-safe connection under normal household water pressure

• Unplug refrigerator and shut off the water supply before servicing
• Place a towel or container to catch residual water
• Depress/loosen the connector collet to release tubing; cut ends square and fully seat lines when installing
• Check for leaks after restoring water and power

This water inlet valve controls the flow of household water into the refrigerator system. Replacing a failing valve restores reliable water supply for functions like ice making and dispensing.

• Opens and closes to allow water into the refrigerator as commanded
• Common failure signs: no ice production, slow or no water from dispenser, intermittent fill, or leaks at the valve area
• May cause humming from the valve when energized but not filling

• Unplug refrigerator and shut off the water supply before starting
• Have a towel ready to catch any residual water
• Transfer any mounting hardware or fittings from the old valve if reused
• After installation, restore water and power, then check all connections for leaks

The Hot Water Valve is an OEM part for LG washing machines. It regulates the flow of hot water into the wash tub during the appropriate cycles. The valve allows hot water to enter the wash tub to help wash clothes thoroughly and effectively at warmer temperatures.

Causes of a bad hot water valve include mineral or lime buildup inhibiting proper operation, worn internal components due to age and use, or damage from freezing during winter months.

Symptoms of a bad hot water valve include:

• Only cold water entering the wash tub, even on hot cycles
• Fluctuating hot water temperature during cycles
• Leaks from the hot water valve area
• Inability to select hot water temperature settings

This LG part is also compatible with some Kenmore models.

This overfill control float sits in the dishwasher tub and rises with the water level to signal the float switch to stop filling. Replacing a cracked or sticking float helps prevent leaks and recurring fill issues. What it does:

• Rises with the water level to actuate the float switch and stop the inlet valve
• Helps prevent overfilling and water leaking from the door
• A float stuck in the UP position can cause no fill or short fill
• A float stuck DOWN or damaged can allow overfilling

• 1 overfill control float

• Disconnect power and turn off water before servicing
• Remove the lower rack; lift out the old float from its guide and clear any debris in the well
• Insert the new float, ensuring it moves freely and reliably actuates the switch when raised

This refrigerator water inlet valve uses an electric solenoid to control the flow of household water into the appliance. Replacing a failing valve helps restore proper ice production and reliable dispenser operation while preventing unwanted drips or overfilling.

• Opens when energized to allow water into the ice maker and/or dispenser; closes to stop flow
• Common symptoms: no ice or no water, slow fill or hollow cubes, continuous dripping/overfill, buzzing/humming with no water, or leaks at the valve area
• Restores correct water control and shutoff at the rear of the refrigerator

• Disconnect power and turn off the household water supply before servicing
• Pull the refrigerator forward carefully; place a towel or container to catch residual water
• Note tubing and wire locations to ensure correct reassembly; transfer any mounting bracket/fittings from the old valve if needed
• After installation, restore water and power, inspect all connections for leaks, and purge air from the line (run dispenser, if equipped)

This water inlet valve assembly regulates the flow of water into your washer during the fill and rinse cycle. Replacing a sticking or leaking valve restores proper filling and helps prevent drips when the washer is off. What it does:

• Controls and directs incoming water into the washer as signaled by the control
• Opens and closes to reach target fill levels, then shuts off water flow
• Symptoms include: washer won't fill or fills very slowly
• Symptoms include: water keeps running or drips into the tub when the washer is off
• Symptoms include: leaks from the valve body or hose connections at the back of the washer

• One water inlet valve assembly

• Unplug the washer and shut off both water supplies before starting
• Keep a towel or tray handy and relieve line pressure before removing hoses
• Move hoses and wire connectors to the new valve one at a time to avoid mix-ups
• Turn water back on, check all connections for leaks, then run a test fill

The Water Valve is an OEM part for Whirlpool washing machines. It is responsible for regulating the flow of incoming water into the washer.

During cycles, the water valve opens and closes at timed intervals to admit the proper amounts of hot and cold water into the tub. It works in conjunction with other components like the water level sensor to fill the tub to the needed depth for each wash program.

Causes of a faulty valve can include mineral deposits clogging internal filters and sensors over time. Mechanical damage from rough handling may also impact performance.

Symptoms of a bad water valve include:

• Inability to select water temperature options
• Erratic or incomplete water filling of the tub
• Fluctuating water levels during cycles
• Persistent error codes related to water issues

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This smart electronic water inlet valve controls the flow of fresh water into the dishwasher during each cycle. Replacing a weak, leaking, or stuck valve restores proper fill performance and helps prevent no-fill, slow-fill, or unintended filling. What it does:

• Opens and closes under control of the electronic board to admit water at the correct time
• Regulates incoming water so the tub fills to the proper level for each cycle
• Failure symptoms can include no fill or very slow filling
• May allow water to seep into the tub when off, or leak from the valve body/fittings

• 1 water inlet valve assembly

• Disconnect power and turn off the water supply before servicing
• Place a towel or tray to catch residual water; depressurize the supply line
• Move the wiring connectors one at a time to the new valve to avoid miswiring
• Restore water and check all connections for leaks; run a fill test to verify operation

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

This water inlet valve kit restores proper water flow to your refrigerator's ice maker and/or dispenser. Replace a sticking, leaking, or failed valve to resolve no-ice, no-dispense, or slow-fill issues and help prevent water leaks.

• Controls water from the household supply to the ice maker and/or water dispenser on demand
• Opens when energized and closes to seal off flow when inactive
• Common symptoms include no ice production, no or slow water dispensing, dripping at the fill area, leaks near the valve, or unusual buzzing/clicking from the valve
• Helps maintain consistent, reliable filling performance

• Unplug the refrigerator and shut off the water supply before servicing
• Place a towel or container to catch residual water and relieve line pressure
• Note tube and wire locations; transfer bracket/fittings as needed and tighten all connections securely
• Restore water and power, check carefully for leaks, and purge air from the system per manufacturer guidance

The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance. The high-quality construction of the water valve enhances durability, reducing the need for frequent replacements and providing long-lasting functionality. By using this genuine OEM part, you can trust that your dishwasher will operate smoothly, preventing leaks and ensuring efficient washing performance. Installing the Dishwasher Water Valve is straightforward, making it a convenient choice for DIY repairs. Whether your original valve is malfunctioning or showing signs of wear, this replacement part restores your dishwasherGÇÖs reliability and efficiency. Invest in the Dishwasher Water Valve to maintain the excellent performance of your Samsung dishwasher and enjoy hassle-free dishwashing for years to come.

This water inlet valve regulates the flow of household water into the dishwasher during each fill. Replacing a worn or clogged valve restores proper filling and consistent wash performance while helping prevent long fill errors. What it does:

• Electrically opens and closes to allow the correct amount of water into the tub.
• Maintains proper water level for wash and rinse phases.
• Common failure symptoms: no water entering, slow/low fill, long fill or "faucet"/fill errors, or leakage from the valve body.
• Internal screen can clog with debris, restricting flow.

• Disconnect power and turn off the water supply before servicing.
• Access the valve near the front/bottom of the dishwasher; place a towel or pan to catch residual water.
• Move wires and water connections one at a time; transfer any mounting hardware or fittings from the original valve as needed.
• Restore water and power, check for leaks, and run a test fill; ensure the float/float switch moves freely.

This water inlet valve regulates the flow of household water into the appliance. When the control energizes the solenoid, it opens to deliver the correct amount of water for filling and operation, restoring proper flow and performance.

• Controls on/off flow from the household water supply
• Opens when signaled to provide the correct amount of water for fill functions
• Helps maintain consistent water flow to the system
• Common failure symptoms: no water flow, slow fill, intermittent filling, or leaking at the valve body

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Note tubing and wire locations before removal; transfer any brackets or clips as needed
• After installation, restore water and power, check for leaks, and purge air from the lines

This water inlet valve assembly controls the flow of water from the home supply into the refrigerator. Replacing a faulty valve restores proper water delivery to the ice maker and/or dispenser for consistent ice production and dispensing.

• Opens and closes to send water to the ice maker and/or dispenser as commanded by the refrigerator
• Common symptoms: no water from dispenser, no ice production, slow/weak dispenser flow
• May also present as continuous dripping into the ice maker/dispenser or leaks around the valve body
• If water lines and filter are clear but filling is inconsistent or absent, the valve may be at fault

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water; note line and wire locations for reassembly
• Ensure tubing is fully seated in fittings; avoid overtightening plastic connections
• Restore water and power, then check all joints for leaks and run the dispenser to purge air/debris

This dual water inlet valve controls water flow to a refrigerator's ice maker and dispenser. Replacing a sticking or leaking valve restores proper filling and reliable dispensing while helping prevent drips, slow flow, or no ice.

• Directs household water to the ice maker and door dispenser through two independent outlets
• Opens and closes electronically via two solenoids when the control calls for water
• Common failure symptoms: no water from the dispenser, ice maker not filling, slow/weak flow, or leaks/drips at the valve
• Mineral buildup, cracks, or failed solenoids can prevent sealing or operation and warrant replacement

• Unplug the refrigerator and turn off the water supply before servicing
• Relieve line pressure and keep a towel or container ready for residual water
• Label and transfer tubing and wire connectors to the new valve one at a time to maintain orientation
• Restore water, check carefully for leaks, and purge air by running the dispenser