Module Dispenser Parts

This dispenser cover assembly replaces a cracked or damaged dispenser housing cover to restore a clean appearance and help the dispenser direct ice and water properly. Molded plastic protects internal components and maintains dispenser alignment. What it does:

• Covers and protects the dispenser opening and internal components from dirt, moisture, and impact.
• Helps guide ice and water to reduce jams, misfeeds, and drips at the dispenser opening.
• Restores appearance when the original cover is cracked, split, or cosmetically damaged.
• Seats into the dispenser housing using factory clips and mounts to maintain proper alignment.

• Disconnect power and shut off the water supply before servicing to prevent shock and leaks.
• Remove dispenser trim or inner door panel to access the cover; support the door/trim while working.
• Handle plastic clips and tabs carefully—damaged clips may require replacement.
• After installation, restore power/water and test the dispenser for proper function and leaks.

Glass touch dispenser assembly replaces the front touch surface and dispenser controls on refrigerators with a glass-style dispenser, restoring responsive touch operation and a clean, finished look for water and ice dispensing. What it does:

• Replaces the glass touch panel and integrated dispenser control so touch commands register correctly.
• Restores proper water and/or ice dispensing when the original touchpad is cracked, scratched, or unresponsive.
• Covers the dispenser opening and improves the refrigerator's appearance by replacing a damaged or discolored front panel.
• Works with the existing dispenser hardware and wiring when the original assembly is removed intact.

• Always disconnect power to the appliance (and shut off the water supply if working on the water/ice dispenser) before starting.
• Handle the glass panel carefully to avoid breakage and personal injury; wear gloves and eye protection when needed.
• Installation typically requires removing the dispenser bezel/door access panel and unplugging the harness from the old assembly—retain existing screws and clips unless replacements are provided.

This is a Bosch dishwasher control board. The dishwasher's control board ensures that the various cycles and settings can be properly managed, such as the washing and draining cycles. If the user notices issues with dishes not coming out clean after a full cycle, the control board should be checked for error codes or signs of visible wear and tear that may indicate it needs to be replaced. Make sure that the dishwasher is turned off, unplugged, and completely disconnected from its power and water sources. It's recommended that work gloves are worn to prevent injury. This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part and as such is sold individually and made from durable, high-quality, non-corrosive materials to ensure the highest possible quality. This part is compatible with dishwashers that have been manufactured by Bosch, Thermador, Gaggenau, and various other brands.

This radiant element cartridge replaces the plug-in cooking module on modular electric cooktops. It restores a smooth, even-heating surface and installs by seating into the cooktop receptacle, bringing damaged or non-heating modules back to reliable service.

• Provides radiant heat beneath a glass-ceramic surface for everyday boiling, simmering, and frying
• Plugs into the cooktop's cartridge receptacle on modular electric units
• Restores performance when the existing cartridge is cracked, damaged, or not heating consistently
• Black finish matches black cooktop designs

• Disconnect power at the circuit breaker before servicing
• Allow the cooktop and old module to cool completely; handle glass carefully
• Lift the old cartridge straight up to disengage; align and fully seat the new cartridge in the receptacle
• Restore power and test all heat settings

Restore reliable cycle control with this electronic control board. It serves as the dishwasher's brain, coordinating wash, drain, and dry functions so the machine starts, runs, and completes cycles as expected.

• Orchestrates cycle timing and interprets sensor inputs
• Distributes power to components such as the wash motor, drain pump, and water inlet valve
• Communicates with the user interface to execute cycle selections
• Typical failure symptoms include: won't start or power up, cycles won't advance, stops mid-cycle, won't fill or drain, or control-related error codes

• Disconnect power at the breaker and turn off water supply before servicing
• Use ESD protection and handle the board by its edges only
• Access the control area, move wire connectors one at a time to the new board, and secure it in the original mounting
• Restore power and, if available, run the unit's diagnostic/service cycle to verify operation

This electronic control board is the appliance's main control (PCB) that coordinates programmed functions and powers key components. Replacing a failed board restores accurate cycle timing and responsive controls for reliable, consistent operation. What it does

• Manages the timing and sequencing of appliance operations
• Interprets inputs from the user interface, sensors, and switches
• Controls power to loads such as motors, valves, heaters, and fans
• Common symptoms of failure: won't start or complete a cycle, unresponsive or erratic controls/display, error codes/alarms, or intermittent operation

• 1 electronic control board

• Disconnect power (unplug or switch off the circuit breaker) before servicing
• Use ESD protection and handle the board by its edges to avoid static damage
• Note/photograph wire locations; transfer connectors one at a time and seat them fully
• Run diagnostics/self-test after installation if available

This small plastic control arm extension links to the mechanism it serves, restoring proper movement and engagement so the appliance can operate as intended. It's a simple, direct-replacement component designed to snap in and align correctly.

• Connects to the existing control arm to extend its reach and function
• Helps correct issues like improper engagement or intermittent operation
• Can address symptoms such as sticking, misalignment, or failure to activate
• Sized to fit the original mounting points for consistent motion

• Disconnect power (and water if applicable) before servicing
• Note the orientation of the original part to match during reassembly
• Inspect the mating control arm and linkage for wear or damage
• Test operation before fully reassembling panels or covers

This dispenser is the door-mounted assembly that delivers ice and/or water from the refrigerator. It replaces a worn, cracked, or malfunctioning dispenser to restore normal dispensing and stop leaks. What it does:

• Provides a finished dispenser opening and support for the actuator and chute so water and ice flow correctly.
• Stops leaks and prevents food or debris from entering the dispenser area when cracked or damaged.
• Restores proper activation when the dispenser lever or paddle no longer engages the valve or auger.
• Helps eliminate jams or misalignment that can cause intermittent dispensing or noisy operation.

• Disconnect power and shut off the water supply before starting any work.
• Remove the inner door panel or trim to access the dispenser mounting screws and wiring.
• Handle gently to avoid cracking surrounding trim; test operation before reassembling the door.

This dispenser interface assembly is the user control module for the refrigerator's ice/water dispenser. It processes button presses and manages dispenser functions, helping resolve issues when the front dispenser controls or display stop responding.

• Interprets dispenser button inputs (water, cubed/crushed) and sends commands to the control system
• Manages front-panel indicators/display and dispenser light/lock functions, as designed by the model
• Symptoms of failure: dispenser won't respond to button presses or won't dispense water/ice
• Other signs: no lights/display, cannot change ice type, intermittent or erratic operation

• Unplug the refrigerator or disconnect power before servicing
• Remove dispenser trim and control panel to access the interface; retain screws and clips
• Handle ribbon cables/connectors by the plugs; take photos for reference to ensure correct reconnection
• This is a static-sensitive board—ground yourself or use an ESD strap; test dispenser functions before reinstalling trim

This electronic control module replaces the oven/range control board that manages user inputs, timers/clock and heating cycles so the appliance responds correctly and restores control functions. What it does:

• Receives inputs from the front console and controls bake, broil, timers and display functions
• Regulates oven cycles and relays commands to power components (elements, ignitors, fans)
• Common symptoms of failure: unresponsive touchpad/controls, blank or erratic display, oven not heating or not following selected cycles
• Replacing a faulty module often resolves intermittent operation and control-related error codes

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Access typically requires removing the console or control panel; handle the board and connectors carefully
• Avoid touching circuitry or terminals; ground yourself to reduce static risk
• Follow the appliance service manual and wiring diagrams

The Timer is an OEM part for GE dishwashers. It regulates the various cycles of the dishwasher, such as washing, rinsing, and drying, ensuring each phase occurs for the appropriate amount of time.

Causes of a bad timer can include electrical failures, wear and tear over time, or mechanical issues that disrupt the timer's ability to accurately control the dishwasher's cycles. A malfunctioning timer can result in incomplete washing or rinsing, affecting the dishwasher's overall performance.

Symptoms of a bad timer include:

• Dishwasher cycles running too long or too short
• Dishwasher not advancing to the next cycle
• Dishwasher stopping mid-cycle
• Inconsistent cleaning results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or worn bin restores reliable dispensing and helps prevent jams, clumps, or spills inside the freezer. What it does:

• Holds ice produced by the icemaker and stages it for dispensing
• Interfaces with the drive to move ice toward the chute when dispensing
• Helps maintain proper ice flow and reduce clumping
• Common symptoms: ice not dispensing or dispensing slowly, loud grinding during dispense, visible cracks, or ice spilling/leaking from the bin

• 1 ice container assembly

• Disconnect power and turn off the icemaker before servicing
• Remove the old bin and discard any remaining ice; clear frost or debris from the drive area
• Slide the new assembly straight onto the drive coupler until fully seated and latched
• Restore power and allow fresh ice to be made before testing dispensing

This dishwasher dispenser stores detergent and rinse aid and releases them at the correct points in the cycle to support consistent cleaning results. Replace a broken, stuck, or leaking dispenser to restore reliable detergent delivery.

• Holds detergent and rinse aid and dispenses them automatically during the wash and rinse portions of the cycle
• Door/actuator mechanism controls the timed release of detergent
• Seals help prevent leaks around the dispenser opening
• Typical failure symptoms: detergent cup won't latch or open, detergent left in the cup, rinse aid not dispensing, or leaks from the dispenser area

• Disconnect power and turn off water supply before servicing
• Remove the inner door panel to access the dispenser; disconnect the wire connector
• Release mounting screws/clips, clean the door cutout, and seat the new dispenser evenly
• Tighten screws in a cross pattern to compress the gasket uniformly; run a test cycle to check for leaks and proper operation

The Dispenser Drawer Handle is an OEM part for Whirlpool washers. It provides a convenient grip for opening and closing the dispenser drawer. It allows you to access the detergent, fabric softener, and bleach compartments within the dispenser drawer.

A bad dispenser drawer handle can occur due to wear and tear, accidental damage, or excessive force when operating the handle. If you notice symptoms such as a loose or broken handle, difficulty in opening or closing the dispenser drawer, or the handle not staying securely in place, it may be time to replace this part.

Symptoms of a bad dispenser drawer handle include:

• Loose or broken handle
• Difficulty in opening or closing the dispenser drawer
• Handle not staying securely in place

Restore your washer's dispenser drawer by replacing the faulty or damaged handle with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Ice Maker Scoop is an OEM component specifically designed for Whirlpool ice machines. As an included accessory, it provides a sanitary and convenient way for users to fetch ice from the storage bin.

The scoop is strategically designed with an ergonomic handle and wide opening bowl shape. This facilitates easy scooping and transport of ice cubes without spillage or crumbling. Its food-safe materials maintain hygienic conditions in the storage area. 

Symptoms of a faulty scoop include:

• Cracks or breaks that compromise the scooping surface 
• Leaks or spills of ice when trying to scoop
• Sharp edges that risk cuts or scratches
• Warping or loosening of the handle attachment over time

This OEM Whirlpool scoop is also compatible with some Scotsman and Manitowoc ice machines. Replace yours today to restore safe and hygienic ice retrieval from the storage bin.
 

Razor blade scraper.