Waste Line Mover Traction Control Cable Parts

This electronic control board is the brain of your appliance, managing power, timing, and user inputs. Replacing a failing board can restore responsive controls, accurate cycles, and reliable operation when the original becomes unresponsive or erratic. What it does:

• Distributes power and timing to relays and components according to selected settings
• Interfaces with the keypad/touch controls and display
• Monitors sensors/switches and executes programmed cycles
• May address symptoms such as no display, unresponsive buttons, won't start, cycles that won't advance, random beeping, or error codes

• 1 electronic control board

• Disconnect appliance from power before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph/document all wire harness connections; move connectors one at a time
• Transfer any mounting brackets or jumpers from the original board as needed
• After installation, run service diagnostics or control calibration if the model provides it

Color: Black

This relay board works with the main control to switch power to high-load oven components. Replacing a failing board can restore consistent heating and reliable performance across bake, broil, and convection functions. What it does:

• Switches high-voltage power to oven elements and fans as directed by the control
• Loss of heat in one or more modes (bake/broil/convection) is a common failure symptom
• Intermittent or erratic heating, long preheat, or heat stopping mid-cycle
• Visible burn marks or heat damage on the board

• Disconnect power at the breaker or fuse box before servicing
• Access location varies by model (rear panel or control compartment)
• Photograph wiring and move connectors one at a time to the new board
• Handle by the edges and use anti-static precautions; reuse existing hardware

This lid hinge pad fits between the washer lid hinge and the cabinet. It cushions the joint to reduce squeaks and metal wear, helping keep the lid aligned and operating smoothly.

• Provides a protective wear surface between the hinge and cabinet/lid
• Reduces squeaks, creaks, and rattling when opening or closing the lid
• Helps maintain proper lid alignment and smooth movement
• Common signs it's worn or missing: squeaking lid, rubbing/scuff marks at the hinge, loose or wobbly lid

• Disconnect power to the washer before servicing
• Support the lid to relieve hinge tension and access the hinge area per your model
• Remove the worn pad and press the new pad fully into the hinge location
• Test lid operation; inspect the opposite hinge and replace its pad as needed if your model uses two

This user interface is the electronics behind a full-door console dishwasher panel. It reads your button selections and communicates with the main control so cycles start and options respond reliably.

• Interprets keypad inputs from the console and sends commands to the control board
• Helps restore proper control of wash cycles, options, and start/delay functions
• Common symptoms: unresponsive or intermittent buttons, no console lights, can't start from the panel, erratic beeping/stuck-key behavior
• Built for full-door (full-console) configurations used on select models

• Disconnect power at the breaker; turn off the water supply
• Remove inner door/console screws to access the UI; support the panel to avoid straining wires
• Handle the board with ESD care; transfer any mounting clips/brackets and seat ribbon cables/connectors fully and correctly
• Reassemble the door and test console operation before running a full cycle

This is the display/control circuit board for the refrigerator's user interface. It drives the temperature/readout display and processes button inputs so you can adjust settings and dispenser functions from the front panel.

• Manages the front-panel display and keypad signals
• Helps when the display is blank or dim
• Helps when buttons don't respond or settings won't change
• Helps with erratic or incorrect temperature readouts

• Disconnect power to the refrigerator before servicing
• Use proper ESD precautions when handling the board
• Take photos of wire/ribbon connections to ensure correct reassembly
• After installation, restore power and verify display and button operation

The Control Board is an OEM part for Frigidaire ranges. It functions as the central processing unit, regulating essential cooking functions such as temperature settings, timer operation and convection modes.

Causes for failure can include moisture damage, normal component fatigue from frequent use or power fluctuations over time.

Symptoms of a faulty control board include:

• Inability to accurately set or maintain programmed oven temperatures
• Failures in heating elements, fans or other systems activating as expected
• Non-functional programming displays and timer features
• Erratic cycling or error codes appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool brand gas ranges. This control board module regulates electrical functions and sends signals to components of the electric oven and cooktop controls. 

Causes of a bad control board can include moisture damage, physical impact over time, or normal component degradation from regular use of the appliance.

Symptoms of a bad control board include:

• Inability to turn on electric oven bake/broil functions  
• Unresponsive touch controls or improper display readings
• Odd noises, smells or sparks coming from control area
• Failure to ignite gas burners or regulate flame levels

This Whirlpool replacement part is also compatible with KitchenAid, Jenn-Air and select Kenmore models.

This timer is the mechanical cycle controller for select top-load washers. It sequences power to the motor, water inlet valves, and drain pump so each step runs in the correct order and duration for consistent, reliable operation.

• Directs power to advance the washer through fill, wash/agitate, drain, and spin
• Restores proper cycle advancement when the washer stalls or skips steps
• Helps resolve symptoms like stopping mid-cycle or running indefinitely
• Can correct intermittent or erratic cycle timing/advancement issues

• Disconnect power before servicing; access the timer from the control console
• Transfer wires from the old timer to the new one, moving one connection at a time
• Reuse existing mounting hardware and control knob/dial as applicable
• Handle sharp cabinet edges and verify dial alignment before reassembly

This part is a washing machine timer. This is the component that controls the washing machine functions and the length of time for each of the cycles. Signs that the timer has gone bad can vary. For example, the washing machine may only wash but will not spin or drain. It might skip cycles or stall mid-cycle. The washing machine could become stuck on a cycle also. If this is happening, the repair person can check for continuity through the timer motor by using a multimeter. If it measures infinite resistance, the timer will need to be replaced. Unplug the washing machine from the wall before trying to replace this part. The person performing the replacement procedure should wear work gloves for safety during the process.This timer is compatible with washing machines that are manufactured by Kenmore and Whirlpool. It is sold individually. This part comes directly from the manufacturer.

This is an electronic clock control board that is made for use with ovens and microwave/oven combination appliances. It is located at the back middle of the range and includes a small display window. The control panel is used to manage the oven functions like baking and broiling. It also includes a clock to show the time of day.If the oven cannot be changed from bake to broil, it may indicate the part is no longer working. A test of the heating elements can determine whether this is the case. Before starting the replacement process, make sure the range is not plugged into the wall and the oven and cooktop are both cool. Open the oven door to access the screws that hold the control board. Unclip the ribbon connection before removing the part. Reverse the process to install the new part.The electronic clock control board is sold as a single part. It is an authentic OEM replacement part that is compatible with wall ovens and microwave/oven combos from Jenn Air.

This genuine replacement part is a control board. The control board is responsible for sending signals to determine the oven's various functions. Attached to the buttons, the control board's circuits allow for the temperature and timer to be adjusted on the oven.To replace the control board, first, make sure that the circuit breaker is off and the oven is unplugged. Pull out the oven to gain access to the back of the range. Locate the upper back panel and remove screws to expose the back of the control board. Pop out the old control board and take note of any wires that are connected. Unplug the wires from the old control board, and resecure them into the new part. Place it back to its original space, and resecure the back panel of the range.This is a genuine replacement part for an control board compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper ovens.

This is the refrigerator's electronic main control board. The power PCB coordinates the compressor, fans, and defrost system using sensor inputs—helping restore stable temperatures, proper defrosting, and consistent operation when the original board fails. What it does

• Routes and regulates power to the compressor and evaporator/condenser fans; failure can cause no-cool or intermittent cooling
• Interprets thermistor signals to manage run times and temperature targets; faults may lead to erratic temperatures
• Controls the automatic defrost cycle to prevent frost buildup and restricted airflow
• Interfaces with other control components; issues can present as clicking from the board, display anomalies, or unresponsive controls

• One main power control board

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection; handle the board by the edges and avoid touching components
• Access the control behind the external service cover; transfer connectors one at a time and reuse original mounting hardware/enclosure
• Restore power and allow the refrigerator to stabilize at set temperatures after installation

The Refrigerator LCD PCB Assembly Kit is an essential component for maintaining your Samsung refrigerator's performance. This genuine OEM part ensures reliable control and display functions, allowing you to monitor and adjust your appliance settings with ease. Designed for compatibility with a variety of Samsung refrigerator models, the kit provides a seamless fit and straightforward installation. By replacing a faulty PCB assembly with this high-quality kit, you can restore your fridge's electronic controls, enhancing its efficiency and longevity. The Refrigerator LCD PCB Assembly Kit supports accurate temperature management and user-friendly interface operations, contributing to optimal food preservation. Investing in this genuine OEM part guarantees that your refrigerator operates smoothly, providing peace of mind and improving the overall user experience.

Note: Can also use equivalent part# WP34001192.

The Dryer Hinge Guide is essential for maintaining the smooth operation of your Samsung dryer. This genuine OEM part ensures a perfect fit, restoring the functionality of your appliance with ease. Designed specifically for Samsung dryers, the Dryer Guide Hinge provides reliable support and stability, allowing the dryer door to open and close smoothly. Its durable construction helps prevent wear and tear, extending the lifespan of your dryer. Installing this guide hinge can resolve issues such as door misalignment or difficulty in opening the dryer, enhancing your overall user experience. Trust in the quality of a genuine OEM part to keep your Samsung dryer performing efficiently and effectively. Whether you're replacing a damaged hinge or upgrading your appliance, the Dryer Guide Hinge is a dependable solution for maintaining your dryer's performance.

Restore reliable oven operation with this electronic oven control board. It governs the bake/broil relays, regulates temperature with the sensor, and runs the display and keypad so settings respond and heat is accurate.

• Interprets keypad inputs and switches oven heating circuits through onboard relays
• Works with the temperature sensor to maintain the set temperature during bake and broil
• Powers the clock/temperature display and stores oven settings
• Common signs of a failed board: blank or flickering display, unresponsive keys, no bake/broil heat, erratic temperatures, or recurring control error codes

• Disconnect power at the breaker before servicing
• Handle the board by the edges and protect against static discharge
• Photograph wiring and transfer any brackets, spacers, or the overlay from the old board
• Seat ribbon cables/connectors fully and verify operation after reassembly