Yard Machine Small Engine Float Bowl Gasket Parts

This overfill control float sits in the dishwasher tub and rises with the water level to signal the float switch to stop filling. Replacing a cracked or sticking float helps prevent leaks and recurring fill issues. What it does:

• Rises with the water level to actuate the float switch and stop the inlet valve
• Helps prevent overfilling and water leaking from the door
• A float stuck in the UP position can cause no fill or short fill
• A float stuck DOWN or damaged can allow overfilling

• 1 overfill control float

• Disconnect power and turn off water before servicing
• Remove the lower rack; lift out the old float from its guide and clear any debris in the well
• Insert the new float, ensuring it moves freely and reliably actuates the switch when raised

This fresh food door gasket seals the refrigerator compartment door to the cabinet, keeping cold air in and moisture out. Replacing a worn or damaged gasket restores a reliable seal, helps maintain temperatures, and cuts down on condensation. What it does:

• Forms a tight seal around the fresh food door to prevent warm air from entering
• Helps maintain stable refrigerator temperatures and humidity
• Reduces moisture or condensation around the door opening
• Common fix for gaps, tears, warping, or a door that won't seal or pops open

• One fresh food door gasket

• Disconnect power before servicing
• Warm the gasket (soak in hot water or use a hair dryer on low) to relax kinks before installation
• Start at the corners and seat the gasket fully into the door channel; ensure even contact all around
• After installation, check door alignment and adjust hinges if needed for a uniform seal

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain air, moisture, or fluid so the unit operates efficiently and reliably over time.

• Provides a compressible barrier between components to prevent escaping air or liquids
• Helps maintain proper performance when the original seal is worn or deformed
• Common symptoms include poor sealing, seepage around a joint, or visible cracks/flattening
• Replace if cut, brittle, misshapen, or no longer seats securely

• Disconnect power; shut off water or gas supply before servicing
• Note the seal's orientation and seating depth before removal
• Clean mating surfaces and grooves; avoid sharp tools that could damage the new seal
• Seat the new seal evenly all the way around; reassemble and test for a proper seal

The 8 Inch Burner Bowl is an OEM part for GE ranges and cooktops. Designed to fit beneath the burner element, this part reflects heat back onto the cookware for efficient cooking and catches spills and drips to keep the cooktop clean. Made from durable materials, the burner bowl is easy to remove and clean.

Causes of a bad burner bowl include excessive heat exposure leading to discoloration or warping, accumulation of spills and debris that can corrode or damage the bowl, and physical damage such as dents or cracks.

Symptoms of a bad 8 Inch Burner Bowl include:

• Noticeable discoloration or warping from heat exposure.
• Rust or corrosion caused by accumulated moisture and debris.
• Difficulty fitting the bowl properly due to physical damage.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Porcelain. Color: black. It measures about 10 inches in diameter at its widest point at the top.

This ice dispenser chute gasket seals the opening at the freezer door's ice chute, helping block warm, humid air from entering. A proper seal reduces frost and moisture around the dispenser and helps keep ice from clumping near the chute.

• Seals the gap between the ice door/flapper and chute to limit air leaks
• Helps minimize frost, condensation, and ice buildup in the dispenser area
• Replaces a torn, flattened, or missing gasket that prevents a tight seal

• Disconnect power to the refrigerator before servicing
• Remove the dispenser front panel/escutcheon to access the ice door and chute area
• Remove the old gasket, clean the mating surfaces, and seat the new gasket evenly all around
• Ensure the ice door/flapper moves freely and seals uniformly before reassembly

The Gasket for the freezer is an OEM part for GE refrigerators. It creates a seal around the freezer door, preventing warm air from entering and cold air from escaping. This seal is crucial for maintaining the correct internal temperature, ensuring the freezer operates efficiently and food stays properly frozen. The gasket measures 19 1/2 inches wide by 28 inches tall.

Causes of a bad gasket can include wear and tear over time, exposure to extreme temperatures, or damage from frequent opening and closing of the freezer door. Accumulated dirt and grime can also affect the gasket's sealing ability.

Symptoms of a bad gasket include:

• Frost buildup inside the freezer
• The freezer running more frequently or continuously
• Higher than normal energy bills
• Warm spots inside the freezer
• The door not closing properly or a visible gap between the door and the frame

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator door gasket creates a tight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn gasket helps maintain proper temperatures, reduce frost buildup, and improve efficiency. What it does:

• Seals the door perimeter to prevent air leaks
• Helps maintain consistent interior temperature and humidity
• Replace if the gasket is torn, cracked, warped, or the door won't seal properly
• Common symptoms include condensation or frost along the door, warm spots, and longer run times

• 1 door gasket

• Unplug the appliance before servicing
• Warm/relax the new gasket (room temperature or brief warm-water soak) to ease installation
• Seat the gasket fully into the retainer; ensure corners fit squarely. Some models require loosening retainer screws, then retightening
• After installation, check the seal with a paper slip around the door and adjust hinges/gasket as needed; use gentle heat to smooth waves

This door gasket seals the dryer door opening to keep heat and moisture inside the drum. Replacing a worn gasket helps restore proper airflow and drying performance while reducing lint and warm air leaking around the door.

• Creates a tight seal between the door and front panel to prevent air leaks
• Helps maintain correct airflow for efficient, consistent drying
• Reduces escaping heat and humidity around the door area
• Common signs it's failing: visible wear or tears, flattened/compressed gasket, lint accumulation near the door, longer dry times, warm air leaking when the door is closed

• Disconnect power; for gas dryers, also shut off the gas supply
• Remove the door assembly as needed and separate door panels to access the gasket (procedure varies by model)
• Remove the old gasket and clean the mating groove/surface of residue and debris
• Press the new gasket fully and evenly into place; align the seam, reassemble the door, and verify an even seal

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

The Freezer Door Gasket is an OEM part for LG refrigerators. This gasket is designed to fit around the perimeter of the freezer door, creating an airtight seal that prevents warm air from entering and cold air from escaping. This ensures the freezer maintains a consistent temperature, which is essential for preserving food quality and reducing energy consumption.

Causes of a bad door gasket can include wear and tear from frequent use, exposure to harsh cleaning chemicals, or physical damage from sharp objects or accidental impacts.

Symptoms of a bad freezer door gasket include:

• The freezer door not closing properly
• Visible cracks, tears, or deformities in the gasket
• Frost or ice buildup inside the freezer
• Increased energy consumption due to the freezer working harder to maintain temperature

This OEM LG part is also compatible with Sears/Kenmore models.

The Refrigerator Door Gasket is essential for maintaining the efficiency of your Samsung refrigerator. This genuine OEM part ensures a precise fit, creating an airtight seal that helps keep your food fresh by maintaining the proper temperature inside. Crafted from high-quality materials, the gasket is durable and resistant to wear, providing long-lasting performance and preventing energy loss. Installing the Refrigerator Door Gasket is straightforward, allowing you to quickly restore your appliance's functionality without hassle. By replacing a worn or damaged gasket with this genuine OEM part, you enhance your refrigerator's ability to retain cold air, reduce moisture buildup, and minimize the risk of leaks. Compatible with a wide range of Samsung refrigerator models, this door gasket is a reliable choice for DIY repairs. Investing in this genuine OEM part not only extends the lifespan of your refrigerator but also ensures it operates efficiently, delivering a better experience in your kitchen.

The Sink Flange Mounting Kit is an OEM part for GE garbage disposers. As a complete kit, it contains the necessary sink flange rings, gaskets, seals, and mounting hardware to properly install or replace a disposer unit under the kitchen sink. Securely fastening the flange to the sink drain opening, affords a sturdy connection point for attaching the disposer mechanism.  

Symptoms of a bad or worn-out sink flange mounting kit include:  

• Looseness, wobbling, or movement of the disposer unit when in use
• Leaks detected around the flange seal or mounting area  
• Strong vibrations being transmitted to surrounding sink components
• Difficulty removing or installing the disposer due to improper fitting

This OEM GE replacement kit prevents any installation issues by providing all new mounting pieces engineered to specification. Compatible brand disposers also include InSinkErator, Badger, Waste King, and selected Kenmore models.
 

This washer door bellow seals the opening between the outer tub and the front panel. The drum-light version restores a watertight seal on models equipped with an interior drum light, helping prevent leaks and odor issues from a torn or deteriorated boot.

• Creates a flexible, watertight barrier between the door opening and the outer tub
• Version designed for models with an interior drum light; aligns with the light opening
• Helps the washer contain water properly through fill, wash, and spin cycles
• Common symptoms: water leaking at the door/front, visible tears or cracks, persistent mildew or odor on the boot

• Unplug the washer and turn off water supply before servicing
• Remove necessary front/top access; release inner and outer retaining clamps and remove the old bellow
• Align drain ports and the drum-light opening; seat the bellow fully on the tub and front panel, then reinstall clamps evenly
• Run a quick test and inspect for leaks

The Dishwasher Water Valve is an essential component for maintaining the optimal performance of your dishwasher. This genuine OEM part ensures reliable water flow control, allowing your dishwasher to fill and drain effectively during each cycle. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance. The high-quality construction of the water valve enhances durability, reducing the need for frequent replacements and providing long-lasting functionality. By using this genuine OEM part, you can trust that your dishwasher will operate smoothly, preventing leaks and ensuring efficient washing performance. Installing the Dishwasher Water Valve is straightforward, making it a convenient choice for DIY repairs. Whether your original valve is malfunctioning or showing signs of wear, this replacement part restores your dishwasherGÇÖs reliability and efficiency. Invest in the Dishwasher Water Valve to maintain the excellent performance of your Samsung dishwasher and enjoy hassle-free dishwashing for years to come.

The Dishwasher Tub Seal Packing is essential for maintaining a watertight seal in your Samsung dishwasher. Crafted from high-quality PU foam, this genuine OEM part ensures reliable performance and longevity. By replacing a worn or damaged seal, you can prevent leaks and enhance the efficiency of your appliance. This seal packing is specifically designed to fit a variety of Samsung dishwasher models, guaranteeing a perfect match and easy installation. With the Dishwasher Tub Seal Packing, you can restore your dishwasherGÇÖs functionality, ensuring that it operates smoothly and effectively. Its durable construction helps maintain optimal water circulation, leading to cleaner dishes and a more efficient wash cycle. Investing in this genuine OEM part not only prolongs the life of your dishwasher but also contributes to a more cost-effective and environmentally friendly household. Trust in the quality and reliability of the Dishwasher Tub Seal Packing to keep your Samsung dishwasher performing at its best.

Color: Grey

The Gasket-FIP (STL) is an OEM part for Whirlpool side-by-side refrigerators. This gasket fits around the fresh food evaporator inlet pipe inside the refrigerator. Its purpose is to form an airtight seal to prevent air leaks and increase efficiency.

Symptoms of a bad gasket include: 

• Higher than normal energy usage
• Formation of frost or ice buildup in unexpected areas 
• Temperature fluctuations inside the refrigerator or freezer compartments
• Strange odors coming from the refrigerator

Causes of a bad gasket can be wear and tear over time, cracks or tears in the sealing material, or improper installation that does not allow for a tight seal. 

This OEM Whirlpool replacement part is also compatible with Maytag, Jenn-Air, Amana, and some Kenmore models.