Ecb Parts

This electronic main control replaces the appliance's central circuit board to restore normal operation and user interface response. It manages program selection, timing, and communication between sensors and motors for proper cycles. What it does:

• Receives user input and runs the appliance's programmed cycles
• Sends signals to motors, valves, heaters, and sensors to start/stop functions
• Can correct failures like unresponsive controls, incorrect cycles, or error-code behavior when board is faulty
• Helps restore display and touchpad responsiveness when the issue is electronic control failure

• Disconnect all power (unplug or shut off breaker) before starting any work
• Take photos of wiring and connector positions before removal to ensure correct reassembly
• Handle the board by edges and avoid touching circuitry; protect against static discharge

This is a Frigidaire washer/dryer combo timer. The washer or dryer timer controls all the timed functions of the appliances, including the cycles and draining. Without a working timer, there is no way for the machine to judge when to start certain parts of the cycle, when to drain water, start rinsing, switch from hot to normal air, and many other tasks. When a timer goes out on these machines, a replacement needs to be ordered immediately. To replace this part, first unplug the appliance from the main power source. This timer is a genuine OEM replacement part sourced directly from Frigidaire. This part is only available individually and is not included with other parts or the main appliance. This product is compatible with Frigidaire appliances.

This mechanical dryer timer controls cycle sequencing and timing for compatible Frigidaire-style electric dryers, restoring proper cycle advancement and user-selected timing. Fits as a direct-replacement timing/control module. What it does:

• Advances the dryer through timed cycles and user-selected settings
• Routes power to components per cycle position
• Helps correct symptoms like cycles that won't advance, no change between settings, or a stuck timer knob
• Replaces a worn or non-rotating timer mechanism that prevents normal dryer operation

• Disconnect power at the breaker or unplug the dryer before service
• Handle the control and timer gently; avoid bending terminals or stressing wiring
• Verify knob alignment and cycle indexing during reassembly
• Refer to the dryer service manual or wiring diagram for exact hookup and safety procedures

This main electronic control board manages refrigerator functions and restores user control to the appliance. Replaces a failed board to return digital controls, cycles, and timed components to normal operation. What it does:

• Receives and processes user inputs from the control panel and directs functions like cooling cycles and defrost.
• Controls compressor, fans, and defrost timing so the refrigerator maintains proper temperature regulation.
• Powers and updates the display and user interface; often replaced when the display or buttons become unresponsive.
• Common symptom fix: intermittent or complete loss of control panel response, erratic cooling behavior, or failure to initiate defrost cycles.

• One main electronic control board

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available.
• Verify connector orientation and seating before restoring power; do not force connectors.

This electronic control is the main user interface and timing brain for your oven or range, restoring reliable cycle selection and display functions so cooking settings respond correctly. What it does:

• Replaces a faulty control board that governs bake/ broil/clock and timer functions
• Restores button/keypad and digital display responsiveness when commands aren't registering
• Helps resolve intermittent operation, incorrect cycle starts, or unresponsive controls
• Works with existing wiring harness and sensors when those components are good

• One electronic control board

• Disconnect power to the appliance at the breaker before beginning any work
• Handle the board by its edges and avoid contact with circuit traces or components
• Verify other components (wiring harness, door switch, sensors) before replacing the control

This electronic clock timer assembly controls the oven's timekeeping and timed cooking functions while providing the front-panel time display. It restores timed bake/clean features and visible clock readout for normal oven operation. What it does:

• Maintains and displays the oven clock so the control shows correct time.
• Enables timed bake, delay start and automatic shutoff features when used by the oven controls.
• Interfaces with the oven control panel to start/stop timed cycles.
• Prevents timed or delay cooking if the clock/timer fails or shows no display.

• One clock timer assembly (single unit as shown).

• Disconnect power to the appliance before inspecting or replacing the clock/timer.
• Access typically requires removing the control panel; handle the control and display lens carefully to avoid damage.
• Use the oven's service manual for disassembly and wiring reference; verify wire routing and connector seating during reassembly.

This electronic clock timer assembly replaces a failed oven clock and timer so you can set, monitor and control timed cooking functions. It restores the display and timer features that help keep your oven on schedule. What it does:

• Displays the oven clock and kitchen timer so you can track cooking time
• Enables timed bake and delay-start functions on compatible ranges/ovens
• Provides user input for setting cook times and timer alerts
• Restores control-panel timekeeping and timer countdown functionality

• One electronic clock timer assembly

• Disconnect power to the appliance before beginning any work
• Remove the control panel or trim as required; handle the new assembly and ribbon/connector with care
• Reconnect the wiring harness securely and verify the clock and timer functions after power is restored

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic control board regulates oven and range functions, interpreting user inputs and controlling displays, timers, heating elements and relays for reliable cooking cycles. Replaces a failed or unresponsive console control to restore normal operation. What it does:

• Receives button/knob signals and sends commands to heating elements, broil/convect systems, timers and indicators
• Drives the display and status indicators so controls and temperature readouts appear correctly
• Controls cycle timing and safety interlocks to enable proper oven operation
• Common signs of failure: blank or erratic display, unresponsive buttons, error codes, or heating elements that won't turn on

• One electronic control board

• Disconnect power at the fuse/circuit breaker before beginning work
• Handle the board carefully to avoid static discharge and physical damage
• Installation typically requires removing the console or control panel; keep fasteners and wiring organized

This electronic clock timer replaces the oven's control module that displays time and manages timed cooking functions. Restores visible timekeeping and allows use of the oven timer and timed bake features. What it does:

• Displays clock and countdown timer so you can monitor time remaining
• Enables timed bake/clean functions that rely on the control's clock
• Replaces a non-working or blank control display
• Helps resolve intermittent or unresponsive timer behaviors

• One complete clock/timer control assembly

• Disconnect power to the appliance before starting any work
• Remove oven control/console trim to access and replace the module; keep small screws and wiring harnesses secure
• Handle the display and circuit board carefully to avoid damage from static or impact

This ignition generator and wiring harness assembly routes power and provides the spark/ignition signal needed for gas appliance burners to light. It replaces a worn or damaged ignition assembly to restore reliable lighting. What it does:

• Sends ignition voltage to the burner igniters and electrodes so burners light reliably
• Routes and secures wiring between the control module and ignition components
• Common failure symptoms: burners won't light, continuous clicking, or intermittent ignition
• Works as the electrical interface between the control and the igniters for safe startup

• One generator and wiring harness assembly

• Disconnect electrical power and turn off the gas supply before starting work
• Follow the appliance OEM diagram for correct routing and connector locations
• Inspect connectors and electrodes for damage and replace if corroded or worn