Power Strike Small Engine Float Bowl Gasket Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181850
Seals washer door to prevent leaks during cycles. Replace if torn, cracked, or leaking water at bottom. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Water was leaking from the bottom of the washing machine during cycles William Q. • Hopewell Junction , NY • August 29, 2014
After troubleshooting the problem I checked online for similar issues and how they were resolved. I discovered the video on YouTube for replacing the wash tub boot. Although the video was for a Whirlpool washer it turned out to be spot on for my Kenmore Elite. The breakdown and removal of the torn boot was bolt for bolt perfect. I ordered the part direct from Appliancepartspros.com on a Sunday night and it arrived by Tuesday afternoon. I watched the same video over, replaced the boot then...
Read more
More
$152.38
- Compare At:
-
$181.33
- You Save:
-
$28.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10354795
Replace your dryer door seal to prevent heat and moisture from escaping around the door edge. Installs by pulling off the old seal and pressing the new one into the door slots. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Seal for dryer door. Diane T. • Fort Bridger , WY • January 14, 2020
Put new seal on.
Read more
More
$54.95
- Compare At:
-
$64.84
- You Save:
-
$9.89
Genuine Ge part
By: Ge
Part Number: WR24X10185
Creates an airtight seal on your freezer door to prevent warm air and moisture infiltration. Replace if worn, cracked, or causing frost buildup.
Do-It-Yourself Stories from Customers like You
Gasket was leaking. Robert W. • Medina , OH • March 17, 2019
Installed freezer gasket.
Read more
More
$81.95
- Compare At:
-
$98.34
- You Save:
-
$16.39
Genuine Samsung part
By: Samsung
Part Number: DA97-13015C
Replace your worn refrigerator door gasket to restore the airtight seal and prevent cold air loss. Fixes torn or damaged seals. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Refrigerator door gasket worn from door flipper Thomas D. • Boca Raton , FL • November 04, 2018
Replaced the gasket. It really didn't take more than 5 minutes to remove and replace.
Read more
More
$127.95
- Compare At:
-
$152.26
- You Save:
-
$24.31
Genuine Ge part
By: Ge
Part Number: WE01M10007
If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Dryer won’t start or stay on. Mike M. • Rotonda West , FL • August 03, 2020
Replaced lint filter and door latch, but door switch was the answer. Works great! No video for this model but was able to view a similar one to follow.
Read more
More
$8.34
- Compare At:
-
$8.72
- You Save:
-
$0.38
Genuine Ge part
By: Ge
Part Number: WH01X20823
Fix a washer door that won't stay closed or latch properly with this door plunger. Resolves issues with doors opening mid-cycle or failing to lock securely.
More
$13.54
- Compare At:
-
$16.11
- You Save:
-
$2.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391912
Dryer won't heat or shuts off early? The high limit thermostat monitors temperature and cuts power when overheating occurs. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
$53.71
- Compare At:
-
$63.38
- You Save:
-
$9.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
Dryer won't heat? This high limit thermostat cycles the heating element to maintain safe temperatures. A simple 5-10 minute fix with a multimeter test.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$52.33
- Compare At:
-
$62.27
- You Save:
-
$9.94
Genuine Ge part
By: Ge
Part Number: WE01X34284
Dryer won't start or stops mid-cycle? A faulty door strike prevents secure latching. This frame-mounted catch ensures proper door closure for safe operation.
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12550115Q
Forms an airtight seal to keep cold air in and warm air out. Replace when worn, cracked, or not sealing properly. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
We bought a used refrigerator gaskets were old and broken not sealing any more Jill H. • Penn Valley , CA • July 08, 2015
Unfortunately, this model has the screws that you need to loosen before you can squeeze the rubber in but the gaskets fit perfectly. It took a lot more time than the video showed but that was because the video was of the pop in type. Be sure when pushing the rubber under the metal strip you make sure it actually goes in. I think the last people installed the gaskets incorrectly and that's why they broke and pulled out of place. Unscrew the bolts first, I used an electric drill. The old gasket...
Read more
More
$103.75
- Compare At:
-
$122.42
- You Save:
-
$18.67
Genuine Ge part
By: Ge
Part Number: WE01X29738
Fix a dryer door that won't stay shut or is hard to open with a new door latch. This tension-based locking mechanism secures your dryer door closed.
Do-It-Yourself Stories from Customers like You
Latch on my ge dryer was broken and door would not stay shut Alan K. • Elk River , MN • February 03, 2026
I input the model number and description and found an immediate match from APP. I wasnt 100% sure on how to access the location once I received the part so I watched a couple video's on the site and they confirmed I was going in the right direction.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Samsung part
By: Samsung
Part Number: DD62-00084A
Fix OE or LE error codes and low water level issues with a new water inlet valve. Moderately difficult repair requires basic tools and skills.
This part fixes the following symptoms
-
Will not fill with water
-
overflowing
See more...
Do-It-Yourself Stories from Customers like You
Samsung dw80f800uws reading oe and le error code dw not starting Suho L. • Flushing , NY • November 14, 2014
Initially we discovered the LE code was due to water in the base due to the over flow. Of course my warranty was up and 1 month later the DW finally stopped with this error. We pulled out the DW and soaked up the water in the sensor on the right side base where it collects water. This got rid of the LE error code. The LE error kept making the drain go constantly so we had to turn off the power in order to stop the draining. The drain activity would go constantly even after opening the door...
Read more
More
$78.74
- Compare At:
-
$92.91
- You Save:
-
$14.17
Genuine Frigidaire part
By: Frigidaire
Part Number: L304430992
Replacement 6-inch chrome drip pan for electric range cooktops. Catches spills and protects your stovetop. Replace if rusted, cracked, or worn out.
Do-It-Yourself Stories from Customers like You
Needed new burners and drip pans John V. • Houston , TX • February 22, 2016
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed.
Read more
More
$13.50
- Compare At:
-
$16.20
- You Save:
-
$2.70
Genuine Ge part
By: Ge
Part Number: WB02X11096
The Microwave Door Latch is an OEM replacement part for GE microwaves. It securely fastens the microwave door when a cooking cycle is activated. A well-functioning latch is important for safety purposes, preventing accidental door openings and potential radiation exposure during operation.
Causes of damage usually involve wear from normal usage over time as the latch mechanism is utilized frequently. Failure can impair safety.
Symptoms of a defective door latch include:
- The door not fully closing or staying fully closed
- Warm spots or hot spots appearing unexpectedly on the door
- Fault codes or error messages related to door closure
- Inability to run cooking cycles safely if the door can open
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Adventium psa1201rss01 door latch broken Dennis S. • Daphne , AL • May 11, 2014
FOUND THAT THIS IS A DIRECT REPLACMENT FOR THE DOOR LATCH ON MY ADVENTIUM PSA1201RSS 01 MICROWAVE/CONVECTION OVEN. GE SAID THE PART WAS NOT AVAILABLE BUT THIS PROVED THEM WRONG. A $3 PART SAVED A $300 DOLLER DOOR.
Read more
More
$10.64
- Compare At:
-
$11.22
- You Save:
-
$0.58
Genuine Ge part
By: Ge
Part Number: WD01X10175
Dishwasher won't drain or drains slowly? A worn check valve flapper may be blocking water flow. This 30-minute DIY fix prevents backflow issues.
Do-It-Yourself Stories from Customers like You
Continuously plugged spray arms from disintegrated rubber sump Bruce B. • Tega Cay , SC • December 27, 2014
Pulled dishwasher from the cabinet and flipped onto its side. Easy access to sump and drain flapper valve that I also replaced. Rubber sump coming apart into soft pills & chunks and plugging spray arms. Better now but it's rediculous that GE would make components that dissolve this way.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Ge part
By: Ge
Part Number: WD12X10408
Fix a dishwasher that won't drain completely with this filter ball. Sits in the sump track to prevent debris backflow. Easy 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Dishwasher was not draining good Stan C. • Aberdeen , WA • January 18, 2017
Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy.
Read more
More
$18.73
- Compare At:
-
$22.48
- You Save:
-
$3.75