Solenoid Parts

The Interlock Switch is an OEM replacement part for GE microwaves. It acts as a safety device that prevents the microwave from operating unless the door is securely closed and latched. The switch monitors the door position and communicates with the main control board to allow or cancel cooking functions.

Causes of failure may include damage from excess heat over time or wear from repeated door openings and closings. Failures can compromise safety if the microwave operates unexpectedly while open.

Symptoms of a bad interlock switch include:

• Microwave can be turned on even when the door is open     
• Error codes displayed related to door issues  
• Inconsistent or faulty communication with the control board

This genuine OEM replacement part is also compatible with GE, Hotpoint, and select Kenmore microwave models.

This dishwasher float sits in the tub and works with the float switch to control the fill level and prevent overfilling. Replace it if cracked or sticking to restore reliable water level control and help avoid leaks.

• Rises with the water level to trigger the float switch and stop filling at the correct point
• Helps prevent overfilling and door leaks
• Common symptoms of a damaged or obstructed float include continuous filling, overfill/leaks, or no/insufficient fill
• Restores consistent water level sensing when the original float is worn or missing

• Disconnect power and turn off the water supply
• Open the door and remove the lower rack
• Remove the float cover; pull the old float straight up and clear any debris from the well
• Insert the new float and verify free up-and-down movement before reassembly and testing

This check valve is a one-way valve used in the refrigerator's water line. It prevents backflow to maintain pressure for the dispenser and ice maker, helping reduce drips and ensuring consistent water delivery.

• Allows water to flow in one direction only to prevent backflow
• Helps maintain line pressure for steady dispensing and proper ice fills
• May reduce post-dispense dripping at the water outlet
• Failure symptoms can include slow/sputtering dispense, dripping, or inconsistent ice fills

• Unplug the appliance and shut off the household water supply before servicing
• Dispense water to relieve pressure; place a towel to catch residual water
• Note the valve's orientation/flow direction and tubing routing before removal
• Fully seat tubing and secure connections; restore water and check for leaks

The Portable Conversion Kit is an OEM part for Whirlpool dishwashers, designed to convert built-in units into portable dishwashers. This kit includes all the necessary components for the conversion.

Causes of a bad Portable Conversion Kit can include incorrect installation, which can lead to leaks or improper water flow, wear and tear on the hoses or adapters over time, and damage from heavy use or accidental mishandling, which can affect the integrity of the connections and the overall operation of the dishwasher.

Symptoms of a malfunctioning Portable Conversion Kit include:

• Leaks from the hose connections or faucet adapter.
• Difficulty attaching or detaching the kit from the faucet, indicating wear or damage.
• Reduced water flow or pressure, affecting the dishwasher's cleaning performance.
• Noticeable wear on hoses or fittings that could lead to future leaks or failures.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This float dome sits in the dishwasher's float well and rises with the water level to trigger the float switch and stop filling. Replace a cracked or missing dome to restore reliable water-level control and overfill protection.

• Moves up and down with the water level to actuate the overfill/flood switch
• Helps prevent overfilling by signaling the inlet valve to shut off at the correct level
• Guides and shields the float mechanism from dishes and debris
• Common symptoms: broken or missing dome, float sticking, dishwasher won't fill or keeps filling

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the float area on the tub floor
• Lift straight up or twist to remove the old dome; clear any mineral/debris from the float well
• Seat the new dome and run a brief fill test

This oven door latch assembly secures the door during normal operation and during the self-clean cycle, helping the oven maintain a safe seal and proper temperature. Replacing a worn latch restores correct door engagement and safety interlock function.

• Locks and releases the oven door; engages safety switch for self-clean
• Can address a loose door that won't stay closed or won't lock for clean
• Can resolve rattling, incomplete seal, or door-ajar error during clean

• Disconnect power before servicing; allow the oven to cool completely
• Access is typically from the top/rear of the range; remove panels as needed
• Transfer any brackets/rods in the same orientation to the new latch
• Test door open/close and self-clean lock function before reassembly

This dual water inlet valve controls water flow to appliance components like the dispenser and ice maker, restoring proper water delivery when the valve is functioning. It replaces a faulty or leaking inlet valve to help stop water issues. What it does:

• Opens and closes water flow to the appliance's water circuits (dispenser/ice maker) when signaled
• Commonly linked to no water dispensed or ice maker not filling
• Can be a source of slow fill or intermittent water delivery
• A leaking or stuck valve can cause visible leaks or water pooling

• One dual water inlet valve

• Shut off water supply and disconnect power before servicing
• Use basic hand tools; avoid overtightening connections to prevent damage
• Inspect inlet hoses and seals when replacing the valve

This dome float is the replacement water-level float that helps the appliance sense and control the tub's water level, restoring reliable fill and shutoff behavior. Use this OEM-fit float when the original is cracked, stuck, or missing. What it does:

• Moves with rising and falling water to actuate the water-level mechanism and help prevent overfilling.
• Can reduce symptoms such as improper fill levels, continuous filling, or intermittent fill shutoff when the existing float is damaged or obstructed.
• Works as part of the washer's water sensing system—does not include electronic switches or housings unless shown.

• Disconnect power and unplug the appliance before starting any repair.
• Access may require removing the washer top or cabinet; follow your model's service instructions.
• Inspect surrounding hoses and clips; replace any damaged components and ensure the float moves freely.

This door latch assembly secures and electrically locks the washer door so cycles can start and run safely. It replaces a worn or failed latch to restore proper door locking and cycle operation. What it does:

• Physically secures and aligns the washer door so it closes properly.
• Activates the door-lock switch so the machine can start and run.
• Helps prevent the door from opening mid-cycle, reducing leaks and interruptions.
• Commonly used when the washer won't start, shows a door-lock error, or the door won't stay closed.

• One complete door latch assembly.

• Disconnect power before starting any repair to avoid shock or injury.
• Remove the washer door boot or front panel to access the latch.
• Check wiring harness connections and connector orientation before reconnecting.
• After installation, run a short diagnostic or test cycle to ensure the latch locks and releases correctly.

This float switch lever is the actuator that moves the dishwasher's tub float to operate the water-level/flood-sensing switch, helping the appliance detect overfill and control fill/drain cycles. Replaces a worn or broken lever to restore proper float activation. What it does:

• Transfers movement from the tub float to the float switch so the machine senses water level correctly
• Commonly needed when a cracked or detached lever prevents the float from engaging the switch
• Can stop overfill-safety trips or no-fill symptoms caused by a non-responsive float assembly
• Works with the existing float and float switch; restores mechanical linkage function

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove lower access panels or tub components as required to reach the float assembly
• Inspect surrounding clips and the float for damage; replace any broken hardware
• Tighten securely but avoid over-torquing; test float movement and switch activation before reassembly

This water inlet valve controls water flow to the refrigerator's ice maker and dispenser, restoring proper water delivery when the system won't fill or dispense. Direct-fit replacement that helps stop leaks and restore function. What it does:

• Opens and closes to let water into the ice maker and dispenser when signaled
• Stops water flow when the fill cycle or dispense cycle ends
• Common part to replace for slow/no ice production or no water from dispenser
• Replaced when valves leak or water lines fail to pressurize

• Disconnect power and shut off the water supply before starting work
• Verify tubing connections and electrical connector orientation before reassembly
• Inspect supply lines and gaskets; use proper replacement fittings if damaged

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring proper filling and dispensing when functioning. Designed for direct replacement to stop leaks or restore water delivery. What it does

• Opens and closes water supply lines to the dispenser and ice maker using two solenoids
• Replaces a failed valve that causes no water or reduced water to the dispenser or ice maker
• Stops intermittent leaks or continuous flow caused by a stuck or damaged valve
• Works with the refrigerator's water pressure and electronic controls to meter fills

• One water inlet valve assembly

• Turn off water supply and unplug the appliance before servicing
• Inspect inlet screen/filters and supply line for debris when replacing valve