Avm918/Wp/Wh Parts

The Charcoal Filter is an OEM part for GE microwave ovens. This component is crucial for absorbing odors and filtering out grease and other contaminants from the air circulated by the microwave's exhaust system. By maintaining a cleaner airflow, the charcoal filter ensures that your microwave remains efficient and free from odors that can affect the taste and smell of your food. The filter measures about 10 inches wide by 2-1/2 inches high.

Causes of a bad charcoal filter include saturation with grease or odors over time, which reduces its efficacy. Additionally, accidental damage or prolonged use without replacement can impair its ability to filter air effectively.

Symptoms of a bad charcoal filter include:

• Persistent odors even after cooking has completed
• Visible grease buildup on the filter
•  Reduced efficiency in air recirculation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Microwave Light Bulb is an OEM replacement part for GE built-in microwaves. As the interior light source, it illuminates the cavity space to view food while cooking or when accessing the microwave. 

Symptoms of a bad light bulb include:

• Dim or unilluminated microwave interior
• Burned-out bulb that will not light at all
• Premature bulb failure indicated by flickering or intermittent output

Causes involve standard filament failure over the operational lifespan of the bulb. Improper wattage replacements or defective bulbs can also lead to early burnout.

This GE OEM replacement light bulb is compatible also with some Hotpoint, Corningware, and KitchenAid models.

The Grease Filter is an OEM part for GE range hoods and microwaves. It captures grease and other airborne particles generated during cooking, preventing them from accumulating in the appliance and ductwork. This filter helps maintain the efficiency of the exhaust system and reduces the risk of grease fires.

Over time, the filter can become saturated with grease and other residues, reducing its effectiveness and potentially causing odors or airflow issues.

Symptoms of a bad grease filter include:

• Reduced airflow or ventilation performance
• Persistent cooking odors
• Visible grease buildup on the filter
• The filter appearing damaged or worn

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This temperature-sensitive thermostat helps protect the microwave and nearby components by switching the circuit based on heat. It typically engages the cooling/vent fan or opens the circuit if excessive heat is detected, preventing overheating damage.

• Monitors temperature and changes state around the 70°C/40°C range
• Helps prevent overheating of internal components during heavy cooking
• Can trigger or regulate the vent/cooling fan on over-the-range units
• Common failure signs: vent fan not auto-cycling with cooktop heat, microwave shutting off from heat, or no continuity when tested at room temp and when heated

• Disconnect power to the appliance before servicing
• Note wire positions; transfer leads one at a time to the new thermostat
• Mount firmly to its bracket or surface for correct heat sensing
• After installation, verify fan operation and monitor for proper cycling

The Light Socket is an OEM part for GE microwaves. This part holds the light bulb securely in place within the microwave, providing illumination inside the appliance.

Causes of a bad light socket can include wear and tear from frequent use, exposure to high heat, or electrical issues that cause the socket to malfunction. 

Symptoms of a bad Light Socket include:

• The light bulb not illuminating when the microwave is in use
• Flickering or intermittent light
• Visible damage or discoloration of the socket
• The bulb not fitting securely or falling out

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tray is an OEM replacement part for GE microwaves. This glass tray rotates on the turntable so the food in the microwave can cook evenly. 

Causes of a bad tray can include warping, cracks or breaks developing from repeated high heat exposure over time, or damage caused by aggressive cleaning methods.

Symptoms of a bad tray include:

• Difficulty fitting dishes, plates, or bowls securely on the tray  
• Tray slipping or sliding during a cook cycle
• Sharp edges posing a safety risk

This genuine GE OEM tray is also compatible with some Hotpoint, RCA, and Kenmore microwave models as well. 

The Microwave Monitor Switch is an OEM part for GE microwaves. This part monitors the position of the microwave door, ensuring that the microwave does not operate when the door is open. It acts as a crucial safety feature, preventing the microwave from emitting radiation when the door is not securely closed.

Causes of a bad monitor switch can include general wear and tear, repeated use, or electrical issues.  

Symptoms of a bad monitor switch include:

• Microwave not starting or running intermittently
• Microwave operating with the door open
• Error codes or safety warnings displayed
• Unusual noises or sparking inside the microwave

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This turntable support ring sits beneath the microwave's glass tray and rides on small rollers to enable smooth rotation. Replacing a worn ring restores stable, quiet turning for more consistent heating and helps prevent tray wobble.

• Supports the glass tray and allows it to rotate smoothly
• Helps maintain even heating by keeping the tray centered and turning
• Common symptoms: tray not turning or stopping intermittently; tray wobbling or slipping
• Reduces grinding or squeaking caused by a worn ring

• Disconnect power by unplugging the unit or switching off the circuit breaker
• Remove the glass tray; lift out the old ring and clean the track
• Position the new ring with the rollers facing up and seated evenly
• Reinstall the glass tray and verify free rotation before restoring power

The Door Latch Board is an OEM part for GE microwaves. The latch board controls the door latching mechanism that secures the microwave door closed during operation. It works alongside the door interlock switch to initiate the removal of power to the magnetron when the door is opened, for safety during use. 

Symptoms of a bad latch board include: 

• The door not closing and latching properly  
• The microwave operating with the door open
• Error codes or blinking lights related to the door interlock system
• Issues engaging or disengaging the door-locking mechanism

This replacement part is also compatible with Hotpoint and Profile microwaves. 

This microswitch senses the microwave door position and controls the safety interlock circuits. Replacing a worn switch restores proper start/stop behavior so the oven only runs when the door is fully closed.

• Detects door open/closed status to enable or disable cooking
• Part of the safety interlock system that stops operation if the door opens mid-cycle
• Replace if the switch fails a continuity check or shows heat or terminal damage

• Disconnect power before service; microwave capacitors can retain a dangerous charge
• Note wire positions and move them to the same terminals on the new switch
• Ensure the door latch cleanly actuates the switch; test operation before reassembly

This 30-watt incandescent appliance bulb restores bright, dependable lighting in your microwave so you can clearly see food and the cooktop. Replace a failed lamp to bring back full visibility while cooking. What it does:

• Provides 30-watt illumination as designed by the appliance—interior cavity or cooktop area on select models
• Restores visibility when the original bulb burns out or breaks
• Typical symptoms include no light, dim light, or flickering
• Blackened glass or a broken filament indicates the bulb needs replacement

• One 30-watt incandescent bulb

• Disconnect power at the plug or circuit breaker before servicing
• Allow the bulb and surrounding area to cool before handling
• Access the lamp cover or lens per your owner's manual; remove cover, replace bulb, and reinstall
• Replace only with the wattage and type specified for your model

The Door Latch is an OEM part for GE microwaves. It securely holds the door shut during cooking cycles to contain heat, prevent leaks, and keep small children from accessing the cooking cavity. 

Symptoms of a bad door latch include:

• The door not staying closed properly 
• Gaps appearing around the sealed door 
• Difficulty latching or an insecure feel when closed
• Loose, gritty, or damaged movement of the latch mechanism

Causes of a bad door latch are typically wear over time from repeated use. Exposure to steam and heating elements can also degrade plastic and metal components. An improperly closing door presents potential safety issues by allowing excessive heat to escape.

This genuine GE replacement part is compatible with some Hotpoint, RCA, and Kenmore models as well.

This is a fuse that is used on microwaves. This fuse shuts off the microwave if there happens to be a power surge. This helps prevent damage to the microwave unit and also prevents fires from being started from the power surge. Be sure to unplug the microwave from its power source prior to attempting the replacement of the fuse. The process to replace the fuse is relatively easy and can be completed in about 30 to 60 minutes time.A new fuse may be needed if the microwave will no longer turn on. If the fuse has been blown, it will show scorch marks, and the filament inside will be melted.This fuse is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific fuse is compatible with microwaves that are manufactured by the General Electric brand.

This microwave turntable coupler links the turntable motor to the glass tray so it rotates during cooking. Replacing a worn hub restores smooth, reliable tray movement and helps ensure more even heating across your dishes. What it does:

• Transfers rotation from the turntable motor to the tray
• Helps resolve a tray that will not turn
• Corrects wobbling or poor engagement at the center hub
• Can improve heating consistency when the tray fails to rotate

• Includes: 1 turntable coupler

• Disconnect power before servicing
• Remove the glass tray and roller ring; lift the old coupler straight up from the center
• Align the new coupler with the motor shaft (flat/D-shape) and press down until fully seated
• Installation can vary by model; follow your model's service instructions to access the motor area

The Vent Grille is an OEM part for GE microwaves. The vent grille is located on the bottom or top of the microwave, depending on the model, and allows heat and steam to properly vent during cooking cycles. It features precisely designed vent openings to maximize airflow while preventing food or liquid from passing through.

Causes of a bad vent grille can include damage from high heat over time, accidental bending or warping from impact, or cracks or breaks from normal wear and tear.

Symptoms of a bad vent grille include:

• Reduced or obstructed air flow during cooking cycles
• Excessive steam or smoke escaping from the sides of the microwave
• Warping, cracks or breaks in the vent openings or frame
• Discoloration or corrosion of the metal grille

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Interlock Switch Lever is an OEM part for GE microwaves. This mechanical component works with the microwave door interlock switch to disable power to the unit when the door is open.

Symptoms of a bad interlock lever include:

• Microwave remaining powered on with door open  
• Delayed enabling or disabling of power when opening/closing door
• Loose or unstable door closing and sealing

Causes can be normal wear from repeated opening and closing of the microwave door over many years of use. The lever and its surrounding components experience stress with every operation.

This GE part is also compatible with Hotpoint, RCA, and select Kenmore models.