Fra18mt2 Parts

This replacement capacitor stores and releases electrical energy to support proper operation of the appliance's circuit. Replacing a weakened or failed capacitor restores reliable startup and smooth performance in the affected component.

• Stores electrical energy and delivers a brief boost during startup as designed by the circuit
• Helps stabilize operation, reducing humming, stalling, or overheating from a weak capacitor
• Common signs include motors that hum but won't start, intermittent operation, breaker trips
• Visual clues of failure: swollen case, leaking oil, or burnt odor

• Disconnect power and verify no voltage is present before servicing
• Properly discharge the old capacitor using safe, approved procedures
• Note wire positions or take a photo; transfer leads to the matching terminals securely
• Mount securely in the existing bracket/strap; keep terminals clear of contact and test operation

This handheld remote control lets you operate compatible Frigidaire appliances from a distance, restoring convenient control of modes, temperatures, and timers without touching the main unit. What it does:

• Sends remote commands to the appliance so you can change modes, fan speed, temperature, or timers from across the room
• Replaces a lost, cracked, or unresponsive remote to regain full remote functionality
• Helps when the appliance doesn't respond to the existing remote or when buttons stick or fail
• Uses standard battery power

• One handheld remote control

• Insert fresh batteries and aim the remote at the appliance's IR receiver; check batteries first when troubleshooting
• Re-pairing or simple setup may be required per the appliance owner's manual—follow OEM instructions if prompted
• Keep remote dry and avoid dropping; remove batteries if storing long-term
• Recycle or dispose of old batteries and electronics according to local regulations

This electronic control board is the appliance's main PCB that manages functions and the user interface. Replacing a failed board can restore normal operation when the unit is unresponsive, erratic, or displaying control-related errors.

• Directs operation of key components based on user settings and sensor feedback
• Powers and communicates with the display/interface and control pads
• Coordinates timing through relays and interfaces with safety/protection circuits
• Common symptoms: no response to buttons, dead/blank display, unexpected cycling or beeping, control error codes, or visible damage on the old board

• Disconnect power before servicing and verify no voltage is present
• Use ESD precautions; handle the PCB by the edges and avoid flexing it
• Photograph/label connectors; transfer each to the same location on the new board, matching any jumpers or DIP-switch settings if present
• After installation, restore power and run the model's test/diagnostic or a cycle to confirm proper operation

This capacitor helps start and run the refrigerator's compressor and/or fan motors so the appliance cools reliably. Replaces a worn or failed capacitor to restore normal motor operation and reduce hard-starting. What it does:

• Provides the initial electrical boost motors need to start turning
• Helps maintain steady motor speed during operation
• Commonly linked to symptoms like compressors that hum but don't start
• Needed if refrigerator cycles frequently or cooling is inconsistent

• One capacitor

• Disconnect power before accessing electrical components
• Discharge the capacitor before touching terminals to avoid shock
• Verify wiring and terminal orientation before reconnecting

A direct-replacement power cord that restores electrical connection to compatible Frigidaire appliances. Simple swap-in part to replace a damaged or worn cord so your appliance can receive power safely. What it does:

• Provides the electrical connection between the appliance and the wall outlet.
• Replaces frayed, cut, or damaged cords that cause intermittent power or unsafe operation.
• Helps restore normal appliance operation when a failed cord is the source of a power issue.
• Designed to match the OEM fit and connections for the specified part number.

• One replacement power cord.

• Disconnect power at the breaker or unplug the appliance before beginning any work.
• Follow the manufacturer's wiring diagram when connecting.
• Use only compatible screws/connectors and route the cord as the original to avoid pinch or abrasion.

A handheld replacement remote control that restores convenient, wireless operation of your appliance's basic functions. Use it to power the unit on/off and change settings from across the room without touching the control panel. What it does:

• Sends wireless commands to the appliance to control power, temperature, fan speed, and mode selection.
• Replaces a lost, damaged, or unresponsive remote to regain full remote operation.
• Uses standard batteries.

• Insert fresh batteries before first use and follow the appliance's pairing or sync procedure if required.
• Keep remote dry and avoid dropping; do not attempt to open or service the remote—replace if internal damage is suspected.
• Dispose of batteries properly and remove batteries if storing the remote for extended periods.

This replacement remote control restores convenient handheld operation of your appliance, letting you change settings and control basic functions from a short distance without opening the unit. Easy swap for a failed or missing remote. What it does:

• Sends control commands to the appliance so you can change modes, power, and settings remotely
• Restores normal remote response when the original remote is lost, damaged, or unresponsive
• Helps diagnose whether issues are remote-related versus appliance-related by verifying signal/send function
• Works only with compatible appliance models that use this OEM remote protocol

• Insert fresh batteries and test remote operation before installation
• Follow the appliance manufacturer's pairing or setup procedure if required
• If remote still does not operate the appliance, check battery orientation and replace batteries, then refer to the appliance's user manual
• Dispose of used batteries properly and avoid exposing the remote to moisture or extreme heat

This electronic control board regulates oven and range functions, interpreting user inputs and controlling displays, timers, heating elements and relays for reliable cooking cycles. Replaces a failed or unresponsive console control to restore normal operation. What it does:

• Receives button/knob signals and sends commands to heating elements, broil/convect systems, timers and indicators
• Drives the display and status indicators so controls and temperature readouts appear correctly
• Controls cycle timing and safety interlocks to enable proper oven operation
• Common signs of failure: blank or erratic display, unresponsive buttons, error codes, or heating elements that won't turn on

• One electronic control board

• Disconnect power at the fuse/circuit breaker before beginning work
• Handle the board carefully to avoid static discharge and physical damage
• Installation typically requires removing the console or control panel; keep fasteners and wiring organized

This dryer lint filter captures lint and debris from the dryer's airflow to help maintain efficient drying and reduce lint buildup. Easy to remove and clean for routine maintenance and safer operation. What it does:

• Traps lint and fibers before they enter the exhaust system
• Helps maintain proper airflow for more consistent drying performance
• Reduces the chance of lint buildup that can cause longer dry times or overheating
• Makes routine maintenance simple — clean the screen after each load

• Remove power to the dryer before servicing; allow the dryer to cool
• Slide or snap the filter into the filter housing according to factory orientation
• Clean lint from the screen regularly with a soft brush or by rinsing and fully drying before reinstalling
• Refer to your dryer's user manual for any model-specific instructions or precautions

This oven temperature sensor detects the internal temperature and sends readings to the range control so the oven can maintain accurate cooking temperatures. Replaces a failed or intermittent sensor to restore reliable temperature control. What it does:

• Senses oven cavity temperature and provides temperature data to the control board
• Helps the control maintain set bake/roast temperatures
• Common symptom: oven temperature is incorrect or fluctuates during cooking
• Common symptom: cook cycles take too long or oven does not reach set temperature
• Common symptom: oven displays a temperature sensor or sensor fault code

• One oven temperature sensor (1 each)

• Disconnect electrical power to the appliance before removing or installing the sensor
• Handle the sensor carefully to avoid damaging the probe or wiring and ensure proper connector seating
• Inspect wiring and connector for damage; replace if frayed or corroded

This replacement blade fan moves cold air across the evaporator to help maintain even temperatures inside the compartment. It restores proper airflow for more consistent cooling and helps reduce frost buildup when working with a good motor. What it does:

• Circulates air across the evaporator to distribute cold air through the compartment
• Restores airflow when a cracked, warped, or missing blade reduces cooling efficiency
• Helps reduce uneven temperatures and localized warm spots caused by poor airflow
• Can reduce abnormal noises caused by damaged or unbalanced blades

• One replacement blade fan

• Disconnect power to the appliance before starting any repair
• Remove the evaporator cover/panel to access the fan assembly per your model's service instructions
• Handle the replacement blade carefully to avoid bending the blades or contaminating the evaporator
• If the fan motor or mounting hardware is damaged, replace those parts as well for reliable operation

This replacement air filter screens airborne particles before they enter the appliance. Installing a clean, intact filter helps maintain proper airflow and protect internal components so the unit can operate as designed. What it does:

• Traps dust and lint before they reach the fan and internal parts
• Helps maintain smooth, unobstructed airflow
• A clogged or torn filter can cause weak airflow or unusual noise
• Replace when the filter is missing, damaged, or will not stay seated

• 1 air filter

• Disconnect power before servicing
• Open the filter access or grille and remove the old filter
• Insert the new filter in the same orientation; ensure tabs/slots fully engage
• Do not operate the appliance without a filter installed

This louver is the molded air outlet grille that directs airflow inside the appliance and helps cover the evaporator/vent area for a finished appearance. Replacing a damaged louver restores proper airflow direction and appearance. What it does:

• Directs cooled air from the evaporator into the fresh-food compartment.
• Covers and protects the vent/evaporator opening from debris.
• Helps maintain even airflow; cracked or broken louvers can cause drafts or uneven cooling.
• Restores the interior appearance when the original grille is warped, cracked, or broken.

• Disconnect power to the appliance before servicing to avoid electrical hazard.
• Access may require removing interior shelves, drawers, or a trim panel.
• Remove clips or retaining screws carefully; do not force the plastic to avoid breakage.
• If clips are damaged during removal, replace them to ensure a secure fit.