Hardware Hand Snowblower Bearing Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10195416V
The Lower Dishrack Wheel Assembly is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth and easy movement of the lower dishrack in and out of the dishwasher. This assembly includes the wheel and the mount that attaches to the dishrack, allowing effortless gliding even when the rack is fully loaded with dishes.
Note: Lower dishrack roller assembly, gray, (4) required to replace them all. Sold individually.
Symptoms of a failing Lower Dishrack Wheel Assembly include:
- The dishrack sticking or struggling to slide in and out
- A wheel breaking off or becoming damaged, leading to uneven movement
- Noise during dishrack movement, indicating wear or damage to the wheels
Causes of a bad Lower Dishrack Wheel Assembly can range from normal wear and tear, which can lead to the degradation of the wheel material or the loosening of the mount, to overloading the dishrack, which puts excess pressure on the wheels and their attachments.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Wheels were broken on kitchenaide Jason D. • Frisco , TX • May 11, 2017
I ordered 4 of this part from AppliancePartsPros.com and watched the repair video of the product. This was a simple repair that took 10 minutes to replace all 4 wheel units on the bottom rack. Product is exact match to the part I replaced.
Read more
More
$33.28
- Compare At:
-
$39.60
- You Save:
-
$6.32
Genuine Ge part
By: Ge
Part Number: WE03X37317
The Dryer Front Bearing Drum Slide (Green, 2-Pack) is an OEM replacement part for GE dryers. These slides are located on the front panel of the dryer and work to support the drum as it rotates. The green slides are designed to reduce friction between the drum and the panel, ensuring smooth operation and helping to prolong the life of the appliance.
Over time, these slides can wear out due to constant movement, heat, and friction. When worn or damaged, the drum may not rotate as intended, leading to noise and reduced efficiency.
Symptoms of bad dryer front bearing drum slides include:
- Squeaking or grinding noises during operation
- The drum appearing loose or sagging at the front
- Clothes not drying evenly or taking longer to dry
- Visible wear or thinning on the existing drum slides
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer began to take much longer to dry clothing what once took 30 minutes now took 2 hours Steven M. • Monett , MO • July 10, 2015
We cleaned out all ducts carefully and did other basic troubleshooting but it did not help.
Began to research the problem on-line and discovered that this dryer has two heating elements. One can fail while the other continues to provide heat - but with a large impact on drying time.
Watched youtube videos and how to take apart the dryer to reach the heating coils.
Tested the heating elements for continuity with tester and the outer loop had no continuity indicating it was broken somewhere. ...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Ge part
By: Ge
Part Number: WE3M26
The Dryer Drum Front Support Bearing is an OEM part for GE dryers, designed to support the front of the dryer drum as it rotates. This crucial component ensures smooth and quiet operation by reducing friction and providing a stable surface for the drum to spin on.
Causes of a bad Dryer Drum Front Support Bearing include excessive wear due to age or overuse, a buildup of lint and debris causing additional friction, or improper loading of the dryer, which can lead to uneven wear.
Symptoms of a bad Dryer Drum Front Support Bearing include:
- Unusual noises, such as squeaking or grinding, during operation
- Excessive vibration or shaking of the dryer
- The drum may have difficulty turning, or it may seem to be stuck
- Increased drying times if the drum is not spinning efficiently
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
The drum front support bearing was breaking Stuart E. • Rochester , NY • December 14, 2024
I followed the directions I found on YouTube for removing the front of the dryer. It was fairly easy, with two screws to remove the top and another two to remove the front. Just use a hand Phillips screwdriver, you will have difficulty using a typical power screwdriver due to space limitations. Watch the tabs on the top that engage with the control panel. Push the top to the left to disengage. I broke one of the three. One connector and two fastons needed to be disconnected on the front. ...
Read more
More
$34.25
- Compare At:
-
$52.23
- You Save:
-
$17.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195417
The Lower Dishrack Roller is an OEM replacement part for Whirlpool dishwashers, designed to ensure the smooth movement of the lower dishrack in and out of the dishwasher, allowing for easy loading and unloading of dishes.
Symptoms of a bad Lower Dishrack Roller include:
- The dishrack becoming difficult to pull out or push in
- A noticeable wobble or instability in the dishrack when it is moved
- The roller breaking or falling off
Causes of these problems typically stem from normal wear and tear, accumulation of food particles or debris around the rollers, or overloading the dishrack, which can put excessive strain on the rollers.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Wheels came off their axels Lawrence W. • Poulsbo , WA • August 15, 2016
Installed 2 new dishrack roller assemblies. The only tools I needed were my fingers, snapped the old assemblies out and snapped the assemblies in.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281153
The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.
Symptoms of a faulty Rear Drum Bearing Kit include:
- Excessive noise or grinding sounds coming from the rear of the dryer
- Difficulty in rotating the drum or drum not turning at all
- Visible signs of wear or damage on the existing bearings
- Increased vibrations or shaking during the drying cycle
Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.
This part fixes the following symptoms
-
Noisy
-
No heat or not enough heat
-
Marks left on clothes
See more...
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Ge part
By: Ge
Part Number: WE25M40
The Rear Drum Bearing Kit is an OEM replacement part for GE dryers. It is a comprehensive kit that includes both rear drum bearings and necessary mounting hardware. These bearings play a vital role in smoothly rotating the dryer drum during cycles, reducing vibrations and noise.
Symptoms of bad bearings include:
- Excessive shaking or vibrating during cycles
- Loud grinding or scraping noises emanating from the rear drum area
- Difficulty turning or rotating the dryer drum by hand
- Increased wear and early failure of other components
Causes of bad bearings can include normal wear and tear over time, exposure to excessive loads or unbalanced loads that strained the bearings, or damage from extended use without proper lubrication.
This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018
Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine.
Details:
The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under...
Read more
More
$73.95
- Compare At:
-
$88.74
- You Save:
-
$14.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 306508
The Tumbler Bearing Kit is an OEM replacement part for Whirlpool washing machines. It includes multiple replacement glides that support the movement of the wash basket or tub. As it rotates during the wash cycle, the tub experiences friction that the bearings help manage. For rear drum support rollers, order 12001541. Please note that repair requires two kits.
Symptoms of bad bearings include:
- Excessive noise or vibrations emanating from the tub area
- Difficulty rotating or spinning the tub by hand
- Visible wear on the bearings
- Premature breakdown of other components due to increased stress
Causes of bearing failure can be normal wear over time from the consistent rotational motion. Using the washer with an unbalanced load can accelerate bearing deterioration.
This OEM Whirlpool kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More
$13.59
- Compare At:
-
$21.82
- You Save:
-
$8.23
Genuine Ge part
By: Ge
Part Number: WE03X37320
The Bearing Slide Assembly is an OEM component for GE electric clothes dryers. As an integral part of the dryer tumbler system, this assembly includes the bearing slides that allow smooth rotation of the tumbler drum during drying cycles.
Symptoms of faulty bearing slides include:
- Abnormal vibrations or shaking of the dryer cabinet
- Noisy operation that gets louder over time
- Rubbing or grinding sounds coming from inside the machine
- Reduced tumbler movement or inability to manually turn the drum
Causes involve general wear of plastic bearing surfaces from years of drum rotation as well as potential damage or misalignment from excess stress on the slides.
This GE OEM replacement helps maintain balanced tumbler movement. Compatible with Hotpoint, RCA, and some Kenmore dryers using the bearing slide assembly design.
Do-It-Yourself Stories from Customers like You
Dryer drum problem Tonya B. • Ithaca , NY • December 24, 2022
A thumping sound (like sneakers in the dryer) started happening. We stopped using it so that it wouldn't get worse and potentially break more parts. Online research suggested rear drive shaft would be the problem. But also suggested while we have the dryer apart, would be smart to replace the belt and the slides/glides (green and white plastic tabs in front, attached to the door). We ordered all the parts from AppliancePartsPros.com and they arrived FAST.
It helps to have two people for this...
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W10435302
The Bearing and Tub Seal Kit is an OEM part for Whirlpool washing machines. It includes high-quality bearings and a tub seal designed to ensure smooth operation and prevent water leaks. The bearings allow the tub to spin freely and quietly, while the seal protects the bearings from water and detergent, extending their life and the overall efficiency of the washing machine.
Causes of failure for these components can vary but often include water infiltration that leads to rust and deterioration of the bearings, or wear and tear from heavy or unbalanced loads that put additional stress on the seal and bearings.
Symptoms of a bad bearing and tub seal kit include:
- Noisy operation, especially during the spin cycle
- Water leaking from the bottom of the washer
- The washing machine tub struggling to spin or not spinning at all
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Washer was super loud in spin cycle & started to leak from bottom Patrick P. • Eustis , FL • February 11, 2015
After about 6 months of use with our Whirlpool Cabrio washing machine it started to sound extremely loud in the spin cycle, we should have called Whirlpool at this point to have it looked at under warranty. Fast forward 5 years later our loud washing machine ended up leaking out the bottom, we had a local service company come out to take a look at doing the repair and they quoted $800 to replace the outer tub assembly. I was not going to pay $800 and figured that most likely we would purchase a...
Read more
More
$103.79
- Compare At:
-
$122.47
- You Save:
-
$18.68
Genuine Lg part
By: Lg
Part Number: 4280EN4001C
The Tub Ball Bearing is an OEM replacement part forLG washing machines. This crucial component supports the inner tub or drum, allowing smooth rotation during the wash and spin cycles.
Symptoms of needing to replace the tub ball bearing include:
- Excessive noise or grinding sounds during operation
- Vibration or shaking of the washing machine
- Difficulty in the tub or drum rotating or spinning
Causes of a faulty tub ball bearing can include normal wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage due to impact or mishandling.
This OEM LG part is also compatible with select Kenmore washer models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$68.78
- Compare At:
-
$81.85
- You Save:
-
$13.07
Genuine Ge part
By: Ge
Part Number: WE03X37319
The Dryer Bearing Slide (2-Pack) is an OEM replacement part for GE dryers. These slides are installed on the front panel of the dryer and support the drum as it rotates. They help reduce friction and wear, ensuring smooth and quiet operation during drying cycles. This pack includes two bearing slides, which are commonly used together in the dryer assembly.
Over time, bearing slides can wear down due to regular use, heat, and friction. When they become worn or damaged, the drum may no longer rotate smoothly, which can affect the dryer's performance and increase noise levels.
Symptoms of bad dryer bearing slides include:
- A loud squeaking or scraping noise during operation
- Difficulty rotating the drum manually
- Clothes taking longer to dry due to improper drum movement
- Visible wear or thinning on the existing slides
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer drum problem Tonya B. • Ithaca , NY • December 24, 2022
A thumping sound (like sneakers in the dryer) started happening. We stopped using it so that it wouldn't get worse and potentially break more parts. Online research suggested rear drive shaft would be the problem. But also suggested while we have the dryer apart, would be smart to replace the belt and the slides/glides (green and white plastic tabs in front, attached to the door). We ordered all the parts from AppliancePartsPros.com and they arrived FAST.
It helps to have two people for this...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Ge part
By: Ge
Part Number: WD01X35298
Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.
What it does
- Supports and guides the lower rack along the tracks
- Replaces broken, missing, or flat-spotted wheels and cracked carriers
- Helps prevent the rack from popping off the rails during loading
- Reduces drag that leads to stiff, uneven rack travel
What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.
Install notes
- Disconnect power before servicing the rack area.
- Pull the lower rack out; swap one assembly at a time to match left/right orientation.
- Fully seat tabs/locks on each carrier; verify wheels roll freely.
- Best practice: replace all four together for even tracking, then run a quick test cycle.
Do-It-Yourself Stories from Customers like You
A wheel housing attached to the bottom of the dishwasher dish rack had come off and melted in a wash cycle Jessica B. • Dayton , NV • November 03, 2024
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix!
Read more
More
$27.58
- Compare At:
-
$30.64
- You Save:
-
$3.06
Genuine Lg part
By: Lg
Part Number: MAP61913707
The Tub Bearing is an OEM replacement part for LG washing machines. It is a crucial component that supports the weight of the tub and allows for smooth rotation during the wash and spin cycles.
Causes of a bad tub bearing can include excessive wear over time due to high-speed spinning, damage from overloading or unbalanced loads, or lack of proper lubrication.
Symptoms of a bad tub bearing include:
- Loud grinding or growling noises during the wash or spin cycle
- Excessive vibrations or shaking of the washing machine
- Leaks due to increased stress on the tub and other components
- Difficulty in starting or maintaining the spin cycle
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Ge part
By: Ge
Part Number: WH2X1198
The Tub Bearing is an OEM replacement part for GE washing machines. It is a critical component that supports the weight of the inner tub and allows for smooth rotation during the wash and spin cycles.
Causes of needing to replace the tub bearing include general wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage from impact or debris.
Symptoms of a bad tub bearing include:
- Loud grinding or rumbling noises during the wash or spin cycle
- Excessive vibration or shaking of the washing machine
- Leaks due to increased stress on the tub and other components
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ge washer was very loud during spin cycle Vincent B. • Merrick , NY • January 31, 2016
After researching the problem on this site, I realized that the most likely cause was a bad bearing contained in the shaft & tube assembly. Essentially, the tub seal failed & allowed water to travel down the shaft & into the housing containing the bearing. I confirmed this by pulling the front cover off of the unit & noticed some brown water pooled directly under the shaft & tube assembly. I followed the disassembly instructions on this site & it wasn't too bad but did take some time as pretty...
Read more
More
$28.95
- Compare At:
-
$34.74
- You Save:
-
$5.79
Genuine Ge part
By: Ge
Part Number: WD35X21038
The Lower Dishrack Roller Kit is an OEM part for GE dishwashers. This kit includes 8 wheels and 8 axles. It allows it to glide smoothly in and out of the dishwasher. Proper functioning of these rollers is crucial for the easy loading and unloading of dishes, ensuring that the dishrack moves efficiently along its tracks.
You should replace the lower dishrack roller kit if the rollers become worn out or damaged. Common causes of roller issues include wear and tear from frequent use, accumulation of debris, or breakage due to heavy loads or accidental impact.
Symptoms of a bad lower dishrack roller kit include:
- Difficulty sliding the lower dishrack in and out
- The dishrack derailing or not staying on its tracks
- Unusual noises when moving the dishrack
- Visible damage or wear to the rollers
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016
I never respond to these kinds of requests but I must respond to this one because of your superior service!
The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too.
The dishwasher wheels replacement didn't require tools & took less than 15 minutes.
The original design/materials are not very...
Read more
More
$30.71
- Compare At:
-
$36.54
- You Save:
-
$5.83
Genuine Ge part
By: Ge
Part Number: WH2X1197
This tub-bearing washer is an OEM replacement part for GE washing machines. It is designed to keep your washing machine's inside tub spinning smoothly during cycles. The bearing Measures approximately 1 inch in inner diameter and 2 inches in outer diameter.
Causes of a bad tub-bearing washer can include wear and tear from extended use. Exposure to vibrations during high-speed spins may cause fatigue of the washer material over time as well.
Symptoms of a bad tub bearing washer include:
- Excessive tub vibration or imbalance at high speeds
- Abnormal noises such as grinding or clicking sounds
- Premature failure of the tub bearing itself
- Reduced spin capabilities or inability to hit maximum RPM
This OEM part is also compatible with Hotpoint, RCA and select Kenmore front-load washers.
Do-It-Yourself Stories from Customers like You
Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018
I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99