Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more
Replaces the water supply tube connecting the inlet valve to the filter housing. Needed when the line is cracked, leaking, or broken. Installs at rear.
First, water and electricity don't mix, so make sure to unplug your refrigerator before beginning this repair - it shouldn't take more than an hour, so you shouldn't have to worry about spoilage. My water dispenser began making a hissing sound from the back of the fridge when you pressed the dispenser. Upon inspection, I discovered the 1/4" feed line into the filter housing assembly had cracked. I ordered the 1/4" feed and 5/16" return lines, figuring to replace the return line while I was back... Read more
Water supply tube that connects your refrigerator to the household water line. Replace if cracked, brittle, leaking, or damaged to restore water flow.
Reduces contaminants and odors from your refrigerator's water and ice supply. Replace every 6 months for optimal performance. Verify fit by model number.
Just ordered and replaced the water filter. Read more
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
The ice chute flap wasnt closing. 1. I turned off power 2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in 3. Disconnected the front panel 4. Unscrewed the next panel to allow access to the chute flap 5. Removed 1 screw holding complete flap and mechanism and replaced with new 6. Re installed all parts in reverse Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return... Read more
Replaces cracked, broken, or worn ice chute door in your refrigerator's dispenser. Controls ice release when dispensing. Includes installation video.
Ice maker not filling or water dispenser stopped working? This water inlet valve controls water flow to both systems. DIY-friendly repair for most users.
Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more
Fix a warm fridge or squealing fan noise with a new condenser fan blade. Circulates air over condenser coils. DIY repair takes about 30 minutes.
I bought a new cooling motor and blade and installed it, everything seems to be working fine now, did not take that long to fix, maybe about 30 minutes, the longest part was trying to get the old fan off the old motor, finally had to cut it off with bolt cutters, I have a 12 year old LG Refrigerator 26930 double door, if you are handy its not that hard. I had to remove a couple parts in front of the motor to get to it, but very easy. Better than buying a new refrigerator...:). I replaced the... Read more
Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.
Replacement water nozzle for refrigerator ice makers. Connects water line to fill tube. Replace if cracked, leaking, or damaged to restore proper connection.
Replaced both Read more
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Connects water supply tubes inside your refrigerator. Replace if cracked, leaking, or won't seal properly after disconnecting lines during service.
I ordered the part I needed using Appliance Pro's website, all parts were clearly shown with part's identified with a number, scrolling down on the page showed those numbers making identifying my part super easy. The best part of the transaction was the speed of delivery, I ordered my parts on Saturday and they arrived on Monday and the repair was simple . Now that's what I call service. I will most definitely use Appliance Pro's again. Read more
Compressor won't start or shuts off after running briefly? The overload protector prevents compressor damage from overheating. DIY-friendly repair in 30 mins.
8 y/o LG unit was not cooling or freezing. There was a clicking on the back side every 2-3 minutes. Used these 2 issues in a internet search and top 2 cited problems were dirty coils then bad PTC & OLP. Tool off the back panel, compressor was quie hot. Coils did not look excessively dirty but cleaned them anyway. DId not resolve the problem. The OLP & PTC recommended for my unit. were different than the original TSD and I thought I would have to return the parts. However, I got on a chat... Read more
Hinge lever mounts on the refrigerator door to guide smooth opening and closing. Replace if cracked, broken, or worn to restore proper door alignment.
Replaced lower hinge assembly (#AP4438177) Read more
Ice dispenser door won't close or stays open causing frost buildup? This small torsion spring restores tension to snap the chute door closed properly.