Slow Clamp Snowblower Fuel Shut-Off Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834
The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore and Samsung dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes.
Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.
Symptoms of a bad gas valve coil kit include:
- Inconsistent or incomplete drying
- Slow or intermittent drying
- Burning smell from the gas dryer
- Improper burner ignition or non-ignition
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Timer will not advance
-
No heat or not enough heat
-
Shuts off too soon
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Flame to dry clothes would go out after about a minute and wouldn't reignite Wendell M. • Brown Deer , WI • June 19, 2014
I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and...
Read more
More
$27.21
- Compare At:
-
$32.11
- You Save:
-
$4.90
Genuine Lg part
By: Lg
Part Number: ACA56078801
The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.
You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.
Symptoms of a bad outer door boot seal clamp include:
- Water leaks from the door area during the wash cycle
- Loose or shifting door boot seal
- Difficulty in closing the washing machine door securely
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
LG front load washer door gasket needed replacement due to mold buildup Howard F. • Port Orange , FL • April 15, 2020
If you have an older model WM8000H_A you MUST pay attention to the type of door gasket (boot seal) that it uses. Every video I could find for replacing the seal on the WM8000HWA involved a different product than what was required for our specific washer. I wound up getting the wrong one by ordering it without help and had to exchange it - after I had the machine taken apart. Thanks to AppliancePartsPros I got the correct seal and front retaining ring the next day.
NOTE! The retaining rings are...
Read more
More
$20.62
- Compare At:
-
$24.74
- You Save:
-
$4.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303931775
The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.
Symptoms of a bad Dryer Gas Valve Coil Kit include:
- No heat or insufficient heat in the dryer.
- The dryer stops heating partway through the cycle.
- A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
- Gas smell from the dryer, indicating incomplete combustion.
Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$23.95
- Compare At:
-
$34.51
- You Save:
-
$10.56
Genuine Lg part
By: Lg
Part Number: 2W20017E
The Outer Door Gasket Clamp is an OEM part for LG washing machines. It is designed to secure the outer door gasket, ensuring a tight seal between the door and the drum. This helps prevent water leaks during the wash cycle and maintains the efficiency of the washing machine.
Causes of a bad outer door gasket clamp can include regular wear and tear, damage from heavy use, or corrosion over time. A compromised clamp can lead to a loose gasket, resulting in water leaks and reduced washing machine performance.
Symptoms of a bad Outer Door Gasket Clamp include:
- Water leaking from the door area during wash cycles
- A loose or misaligned door gasket
- Difficulty in securing the door properly
- Visible rust or damage on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Washer basket was loose banging/knocking when running eventually gave a 'load out of balance code" Dwayne D. • Hopewell Junction , NY • September 29, 2014
The repair was fairly straight foward as shown in the video. However, driving the shaft from the bearings took some doing. It required replacing the use of the board with a spare bolt and a 2lb hand sledge. (having an air hammer as reserve, also not a bad idea) I rated this reair as a "1" however I've been an auto mechanic for 40 years. If you do not have good general mechanical ablities you may find this more challenging as you get it further apart. I suggest anyone making this repair should...
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Ge part
By: Ge
Part Number: WH1X2117
The Timer Knob Clip is an OEM part for GE washing machines. It secures the timer knob to the timer shaft, allowing users to set and adjust the washing cycle duration accurately.
You should replace the timer knob clip if it becomes worn out, broken, or lost. Common causes of a bad timer knob clip include regular use leading to wear and tear, physical damage from excessive force, or accidental breakage during maintenance or operation.
Symptoms of a bad timer knob clip include:
- The timer knob spinning freely without engaging
- Difficulty in setting or adjusting the timer
- The timer knob falling off or feeling loose
- The washing machine not starting or stopping cycles correctly
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WH16X513
The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.
Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.
Symptoms of a bad drain hose clip include:
- Water leaking from the back of the washer
- Drain hose detaching or becoming loose during operation
- Difficulty securing the drain hose in place
- Visible damage or cracking on the clip
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Note: For the entire drain hose, use part number WH41X10096.
Do-It-Yourself Stories from Customers like You
Discharge hose for 15 year old hot point washer Edith P. • Shelton , CT • October 06, 2014
The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars,
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WR02X12149
The Compression Ring is an OEM part for GE refrigerators. It is designed to secure and seal connections within the refrigerator’s water and ice dispensing system, ensuring a leak-free operation. This small yet vital component helps maintain the integrity of the connections, preventing water leaks and ensuring the proper flow of water through the dispenser and ice maker.
Over time, the compression ring can wear out or become damaged due to regular use and the natural aging of materials. If the compression ring is compromised, it can lead to water leaks or poor water flow, which can affect the overall performance of the refrigerator’s water and ice dispensing functions.
Symptoms of a bad compression ring include:
- Water leaks around the dispenser or ice maker
- Reduced water flow or no water flow at all
- Drips or puddles forming inside the refrigerator
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Evaporator fan started making loud noise from blade hitting shroud Kerry M. • Englewood , CO • October 03, 2016
Replacement of the evaporator fan motor, fan blade, and grommets.
The amount of disassembly to reach the part took most of the effort
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: 285790
The Clutch Band and Lining Kit is an OEM part for Whirlpool washing machines. It contains the clutch band and clutch lining components essential for proper transmission of power from the washer motor to its drum during the spin cycle. The clutch band and lining allow for a controlled amount of slippage to safely extract water from clothes without damage.
Symptoms of a bad clutch band and lining include:
- Excessive noise or vibration during spin
- Slow or ineffective spinning
- The drum failing to spin or “locking up”
- Premature wear of other transmission parts
Over time and with heavy use, these components can wear down. If slipping or damage is detected, it’s important to replace the kit to avoid potential transmission repairs.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Will not agitate
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Squealing during spin cycle and very weak agitation Elijah S. • Stockton , CA • May 24, 2015
My parents have the older 80 series washer and dryer that gets used way more than a consumer washer and dryer was ever meant to be used. The washing machine finally said im tired. During the spin cycle it was making a really loud squealing noise and during the agitation cycle it would barely agitate the clothes. So i ordered the basket drive to get rid of the squealing during spin cycle and noticed the dogs on the cams were warn and werent grabbing so ordered the whole cam kit to be safe...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406520
The Refrigerator Door Gasket Clips are OEM parts for Frigidaire refrigerators. These clips secure the door gasket in place, ensuring a tight seal to maintain the internal temperature and prevent cold air from escaping. This pack contains 40 clips, which secure the interior trim pieces and hold the gasket and liner to the freezer lid.
Over time, the gasket clips can become damaged or worn out due to frequent opening and closing of the refrigerator door, exposure to moisture, or accidental impacts. If the clips fail, the door gasket may not stay in place, compromising the refrigerator's efficiency.
Symptoms of bad refrigerator door gasket clips include:
- The door gasket not staying securely in place
- Visible damage or wear on the clips
- Cold air escaping from around the door
- Increased energy consumption due to poor sealing
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014
Ordered a new seal, and replaced it with a new one freezer works great now.
Read more
More
$72.41
- Compare At:
-
$74.13
- You Save:
-
$1.72
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$10.00
- Compare At:
-
$10.43
- You Save:
-
$0.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Bosch part
By: Bosch
Part Number: 00172272
The Pump to Heater Hose Clamp is an OEM part for Bosch dishwashers. This clamp secures the hose that connects the pump to the heater, ensuring a tight and leak-free connection. It plays a crucial role in maintaining the integrity of the water flow within the dishwasher, preventing leaks and ensuring efficient operation.
Causes of a bad hose clamp can include wear and tear over time, loosening due to vibrations, or damage from repeated tightening and loosening. A faulty clamp can lead to water leaks, which can cause further damage to the dishwasher.
Symptoms of a bad pump to heater hose clamp include:
- Water leaking from the hose connection points
- Reduced water pressure within the dishwasher
- Visible wear, rust, or damage on the clamp
- The clamp not holding the hose securely in place
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Stuck on 1 minute moldy and white film on dishes. Ben W. • Vienna , VA • January 01, 2018
On my Bosch she55m15uc/64, the cycle would take 3-4 hours, with the machine stuck on "1 minute" for a long time. The interior was getting moldy and smelly, and the dishes had a white film. At first, I thought it was the heater relay on the control board, but I pulled that relay and it seemed to be working. I could get an ohmmeter on the heater element without taking the bottom off the dishwasher, and the resistance was infinite. Replacing the heater did the trick.
On my unit there was a...
Read more
More
$30.95
- Compare At:
-
$36.52
- You Save:
-
$5.57
Genuine Ge part
By: Ge
Part Number: WH02X10093
The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.
You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.
Symptoms of a bad compression ring include:
- Excessive shaking or movement of the washing machine during cycles
- Unusual noises during operation
- The washing machine tub appearing misaligned or loose
- Ineffective washing due to instability
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft Jeffery B. • Donalsonville , GA • September 04, 2015
I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting...
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Lg part
By: Lg
Part Number: 4861ER2001D
The Inner Door Gasket Clamp is an OEM part for LG washing machines. It secures the inner door gasket in place, ensuring a tight seal to prevent water leaks during the wash cycle. This clamp is essential for maintaining the efficiency and reliability of the washing machine by keeping the door gasket firmly in position.
Over time, wear and tear, exposure to water and detergent, or accidental mishandling can compromise the integrity of the clamp, leading to potential leaks.
Symptoms of a bad inner door gasket clamp include:
- Water leaking from the door area
- The door gasket not staying securely in place
- Visible damage or corrosion on the clamp
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$37.58
- Compare At:
-
$45.10
- You Save:
-
$7.52
Genuine Ge part
By: Ge
Part Number: WH01X10279
The Outer Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp ensures that the seal is tightly held in place, preventing water from leaking out of the front load washer during operation.
Causes of a bad Outer Door Boot Seal Clamp can range from corrosion due to exposure to moisture and detergents, to physical damage from improper installation or removal of the door seal.
Symptoms of a malfunctioning Outer Door Boot Seal Clamp include:
- Water leaking from the front of the washing machine
- The door boot seal coming loose or detaching from the front panel
- Visible damage or corrosion on the clamp, compromising its integrity
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking rubber gasket GE washer model no: wpdh8800j3mg Michael C. • North Truro , MA • January 22, 2024
I replaced the following parts in the GE WASHER that I have owned for approximately 14 years:
Part no.: WH08X10038 - rubber gasket
Part no.: WH01X10277 - inside gasket clamp
Part no.: WH01x10279 - outside gasket clamp
The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago.
I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years...
Read more
More
$22.52
- Compare At:
-
$26.80
- You Save:
-
$4.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 134616300
This clamp secures a flexible connection inside your appliance, holding a hose or boot firmly to its fitting to maintain a tight, leak-resistant seal and prevent connections from backing off during operation. What it does:
- Holds a hose or boot to a tub, pump, or port to keep the joint sealed
- Helps prevent leaks and disconnections from vibration or pressure changes
- Restores proper sealing when the original clamp is stretched, rusted, broken, or missing
- Typical symptoms include drips at the joint, a loose/slipping connection, or visible clamp damage
What's included:
Install notes:
- Disconnect power and turn off water supply; place a towel to catch residual water
- Note the clamp's position before removal; seat the hose/boot fully over the fitting bead
- Position the clamp just behind the bead and engage/tighten it evenly
- Run a short test cycle and check the joint for leaks
Do-It-Yourself Stories from Customers like You
E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove...
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59