Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Water supply line that connects the valve to the ice maker or dispenser in your refrigerator. Replace if cracked, split, or leaking at connections.
Removed the old line and replaced with the new. This is the sixth time I've replaced the line. Yes you read that right, the sixth time. Lines fail about every 6-8 months so I can change one out now in about 10-15 minutes. Bought the refrigerator in Feb '09 and the line first failed in March 2012. Since then I've had failures in as little as 4 months to as much as 9 months. Frustrating to say the least, but I'm a whiz at changing out the line :-) Read more
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
After my layman's diagnosis (hope) of a bad micro switch to the ice dispenser (would not activate and dispense ice through the chute) I purchased the both the ice and water dispenser micro switches (kill two birds with one stone). Albeit the video attached to these parts may be helpful to some it was not applicable to my refrigerator, as you could not access it from the front by removing the exterior dispenser plate. Don't try this on the LG, LFX25991ST series, refrigerator or you may break it... Read more
Interior light won't turn on when door opens? This refrigerator door switch signals when the door opens or closes. DIY-friendly repair, takes about 5 minutes.
I watched the repair video and I replaced the switch. I ordered the switch on Friday and the part came the next day. Amazing. Read more
Fridge freezing food or not cooling? This temperature sensor monitors internal temps and signals the control board. Fixes ER FF errors. Easy install.
I replaced the evaporator sensor. Your company sent me the exact sensor I needed at a great price. No other company was able to help. No call was needed. Your website was great. Read more
Replaces the water supply tube connecting the inlet valve to the filter housing. Needed when the line is cracked, leaking, or broken. Installs at rear.
First, water and electricity don't mix, so make sure to unplug your refrigerator before beginning this repair - it shouldn't take more than an hour, so you shouldn't have to worry about spoilage. My water dispenser began making a hissing sound from the back of the fridge when you pressed the dispenser. Upon inspection, I discovered the 1/4" feed line into the filter housing assembly had cracked. I ordered the 1/4" feed and 5/16" return lines, figuring to replace the return line while I was back... Read more
Water supply tube that connects your refrigerator to the household water line. Replace if cracked, brittle, leaking, or damaged to restore water flow.
Reduces contaminants and odors from your refrigerator's water and ice supply. Replace every 6 months for optimal performance. Verify fit by model number.
Just ordered and replaced the water filter. Read more
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
The ice chute flap wasnt closing. 1. I turned off power 2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in 3. Disconnected the front panel 4. Unscrewed the next panel to allow access to the chute flap 5. Removed 1 screw holding complete flap and mechanism and replaced with new 6. Re installed all parts in reverse Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return... Read more
No water from dispenser or ice maker? This water inlet valve controls flow to both. DIY-friendly repair—takes about 15 minutes with basic tools.
I viewed the self help video on You Tube and checked the water pressure first. Once the water pressure was determined to be fine I ordered a new water inlet valve as recommended from the video. LG supplier did not have the recommended part and after checking on-line I found Appliance Parts Pros had just what I needed. The video from Appliance Plus Pros showed step by step on how to replace the water inlet valve. It took me approximately 15 minutes to remove the old one and install the new one.... Read more
Replaces cracked, broken, or worn ice chute door in your refrigerator's dispenser. Controls ice release when dispensing. Includes installation video.
Not making ice or water not refilling? This ice maker assembly fixes failed ice production. DIY-friendly repair takes about 15 minutes with a screwdriver.
Screwdriver and one plug Read more
Reduces sediment and particulates to improve water quality and protect your refrigerator. Replace every 6 months for optimal performance and taste.
I replaced the water filter. Thank you very much. You sent me the right filter. Read more
Ice maker not filling or water dispenser stopped working? This water inlet valve controls water flow to both systems. DIY-friendly repair for most users.
Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more
Replacement guide rail that supports and aligns refrigerator drawers for smooth sliding. Needed when original rail is cracked, broken, or split.
Few minutes to unscrew and fasten new guide rail. Read more
Lower hinge assembly supports and aligns your refrigerator door. Replace if cracked, broken, or worn causing misalignment or door sag. Installs at door bottom.
The left hinge works on the right side as well as the left. All you have to do is unscrew the little plastic post and move it to the other hole. So even though the web might say that the left hinge assembly is not compatible with your fridge, or that the right hinge assembly is no longer available, it will still work. The door stopper assembly worked just fine. All you have to do is screw it in to the bottom of the door. You will have to disassemble the top hinge (on top of the fridge) in... Read more