Mgr55875qdw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Flat Style Oven Igniter Kit

4.9 (412)

By: Whirlpool

Part Number: 12400035

The Flat Style Oven Igniter Kit is an OEM part for Whirlpool ovens. It is designed to ignite the gas in the oven burner, facilitating the start of the heating process. This igniter is crucial for ensuring your oven heats up quickly and efficiently, providing the necessary flame for cooking and baking.

Symptoms of a bad Oven Igniter include:

The oven failing to heat up or taking a long time to reach the desired temperature.
A noticeable gas smell when the oven is turned on, indicating the gas is not igniting.
The igniter glowing without producing a flame, which can point to a lack of adequate temperature to ignite the gas.

Causes of a bad oven igniter can include the wear and breakdown of the igniter element over time, a faulty electrical connection, or a disruption in the gas supply.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Little to no heat when baking
Gas smell

Do-It-Yourself Stories from Customers like You Magic chef broken oven igniter Richard C. • Kew Gardens , NY • July 13, 2015

Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately... Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Temperature Sensor

4.8 (73)

By: Whirlpool

Part Number: 12001655

The Oven Temperature Sensor is an OEM part for Whirlpool ovens. It measures the oven's internal temperature and sends this information to the control board to maintain the desired cooking temperature.

Causes of a bad temperature sensor can include exposure to high temperatures over long periods, electrical issues such as short circuits, or physical damage due to impact or mishandling.

Symptoms of a bad temperature sensor include:

Inaccurate temperature readings
Oven not heating to the set temperature
Oven overheating
Error codes displayed on the oven control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the long 6-inch sensor order 12001656.

This part fixes the following symptoms

Oven is too hot
Little to no heat when baking
Won't start
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Oven did not keep correct or consistently correct temperature Keith J. • Antioch , IL • September 06, 2014

Online videos made this seem an easy fix. I unplugged the oven and removed the rear panel, then found where the temp sensor entered the oven. I unplugged the sensor's electric connector. Unlike the videos, this sensor screwed in from the inside of the oven, so I had to remove the 2 screws inside the oven which hold the sensor in place. Then I pulled the sensor out, careful not to tear the insulation with the wires and connector. Then I just pushed the new connector through the same hole and... Read more

$33.95

Compare At:: $40.40
You Save:: $6.45

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Door Gasket

4.9 (72)

By: Whirlpool

Part Number: WPW10162384

The Oven Door Gasket is an OEM part for Whirlpool ovens. This gasket is essential for maintaining a proper seal around the oven door, preventing heat from escaping and ensuring efficient cooking performance. The gasket measures approximately 76.66" in total length with a diameter of about 0.47", it features 25 built-in metal retaining clips.

Causes of a bad oven door gasket can include regular wear and tear, exposure to high temperatures over time, or accidental damage from cleaning or handling. A compromised gasket can lead to heat loss, which affects cooking times and energy efficiency.

Symptoms of a bad oven door gasket include:

Heat escaping from the oven door
Longer cooking times
Visible cracks or tears in the gasket
The oven door not closing properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. Joe D. • New Berlin , WI • March 20, 2019

First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more

$70.45

Compare At:: $84.54
You Save:: $14.09

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Rack

5.0 (26)

By: Whirlpool

Part Number: WPW10282492

The Oven Rack is an OEM part for Whirlpool ovens. It provides a sturdy and reliable surface for baking and roasting a variety of dishes. Designed to fit perfectly within Whirlpool models, this rack ensures optimal air circulation around the food, contributing to even cooking and browning.

Causes of a bad Oven Rack can include warping or damage from high heat, rusting from moisture exposure, or general wear and tear over time. Misshaping or instability can also result from placing too much weight on the rack or using it inappropriately.

Symptoms of a bad Oven Rack include:

Difficulty sliding the rack in or out.
Uneven cooking or baking due to improper leveling of the rack.
The rack does not fit securely in the oven slots.
Visible rust or damage, which could potentially contaminate food.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven racks no longer shiny Ron N. • Menomonee Falls , WI • September 15, 2014

Appliances will be sold with the house so the old oven racks were no longer shiny. Replacement racks present a better looking oven. Read more

$52.32

Compare At:: $61.74
You Save:: $9.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Leveling Leg

4.5 (13)

By: Whirlpool

Part Number: W11665456

The Leveling Leg is an OEM replacement part for Whirlpool ranges. These adjustable legs help balance and stabilize the range.

Causes of a bad leveling leg commonly involve wear over time, thread or weld failures from supporting heavy loads, as well as damage due to impact or drops during installation.

Symptoms of a faulty leveling leg include:

Instability such as rocking motions felt while cooking
Uneven heating
Doors that do not close properly

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You 2 leveling legs on a range had been damaged by tilting the appliance the plastic threads were broken William R. • Cary , NC • June 28, 2014

The problem was partly caused because the original legs were at full extension. The replacement legs were longer than the originals and were more secure at the needed length. One difficulty was that the threaded base plate where the legs screwed in had been damaged and had to be reshaped, I was able to reshape the sockets with some effort, to allow the legs to thread in, though one remained slightly angled. (A metal tool of some type which could be threaded in and used to bend the socket area... Read more

$21.95

Compare At:: $26.12
You Save:: $4.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.9 (12)

By: Whirlpool

Part Number: WPY706189

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening.

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

Loose or wobbly components
Misalignment of parts
Noise due to vibrating or loose parts
Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drum baffle broke off James H. • Etna , OH • March 21, 2017

I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw (10-32)

4.9 (8)

By: Whirlpool

Part Number: WP179051

This 10-32 machine screw secures panels, brackets, and internal assemblies in your appliance. Replacing missing or stripped hardware restores a tight, rattle-free fit and helps keep components properly aligned.

Provides a threaded fastener for metal-to-metal connections
Helps maintain correct alignment of panels, brackets, and housings
Replaces missing, rusted, or stripped screws
Symptoms include loose or vibrating panels, gaps/misalignment, or hardware that won't tighten

What's included: 1 screw Install notes:

Disconnect power (and shut off gas/water, if applicable) before servicing
Match the 10-32 thread and length to the original screw for the location
Start by hand to avoid cross-threading; tighten snugly without over-torquing
Retain and reinstall any original clips, spacers, or washers used in your model

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$8.36

Compare At:: $9.86
You Save:: $1.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (3)

By: Whirlpool

Part Number: WP4159193

Size: 10-24X5/16-NI

Do-It-Yourself Stories from Customers like You Hinges were weak Don M. • Colchester , VT • December 31, 2016

Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more

$8.95

Compare At:: $10.56
You Save:: $1.61

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Anti Tip Bracket

4.8 (5)

By: Whirlpool

Part Number: WP3801F656-51

For screws order: WP7101P485-60.

Do-It-Yourself Stories from Customers like You Install anti tipping bracket for stove Nathan M. • Alexandria , VA • March 30, 2015

Part arrived quickly and was an easy install1 Read more

$8.95

Compare At:: $10.74
You Save:: $1.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

4.0 (1)

By: Whirlpool

Part Number: WP98008545

Color: Black. For biscuit order 98008169. For white order WP98008544.

Do-It-Yourself Stories from Customers like You Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015

Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more

$7.95

Compare At:: $10.99
You Save:: $3.04

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Burner Knob

5.0 (2)

By: Whirlpool

Part Number: WP74002353

Color: black. Measures about 2 inches in diameter.

Do-It-Yourself Stories from Customers like You Couldn’t read the knobs Felious N. • Bellwood , IL • September 09, 2025

Took off the old ones and put on the new ones, 123. Read more

$22.95

Compare At:: $27.08
You Save:: $4.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Square Gas Drip Pans

5.0 (4)

By: Whirlpool

Part Number: 1430283

By Maytag/Magic Chef. Set of 4 chrome square drip pans for gas ranges / cooktops. Fits many brands, including Maytag, Magic Chef, Admiral, Crosley, Norge, Jenn Air and others. Matching set of grates: 1430291.

Do-It-Yourself Stories from Customers like You Square gas drip pans Steve S. • Fruitland Park , FL • November 08, 2018

I just took the old ones out and put the new ones on Read more

$66.65

Compare At:: $79.98
You Save:: $13.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Valve (Gas)

5.0 (4)

By: Whirlpool

Part Number: WP74006427

This oven gas valve controls the flow of gas to the oven burner. When functioning properly, it allows the burner to ignite and maintain a steady flame for consistent preheating and baking performance.

Opens and closes to supply gas to the oven burner as commanded by the control system
Helps ensure gas only flows when ignition is called for
Common symptoms include no heat/no flame, slow preheat, or temperature not reaching set point
May also present as intermittent heat or a weak/irregular burner flame

What's included: One oven gas valve. Install notes:

Disconnect power and shut off the gas supply before servicing
Verify igniter condition/current; a weak igniter can mimic a failed valve
Transfer any required fittings or brackets from the original valve
Use gas-rated thread sealant on threaded joints; leak-test all connections and run a test cycle to proper ignition

Do-It-Yourself Stories from Customers like You Oven would not heat up Dominic M. • Yarmouth , MA • November 01, 2014

Performed basic troubble shooting, found gas valve would not allow oven to turn on but broiler worked. Ordered new valve which came quickly Thank you. Shut off gas to stove and removed power then proceded to remove and install new valve. Oven now works great... Read more

$212.95

Compare At:: $255.54
You Save:: $42.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Hex Nut

5.0 (3)

By: Whirlpool

Part Number: WP488130

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

Do-It-Yourself Stories from Customers like You Oven drawer roller hardware was missing Virginia R. • Woodinville , WA • April 11, 2017

Ordered the roller and nut, reattached the nylon wheel that I found in the floor under the oven.This was the only website where I could find all of the parts detailed and so I knew exactly what to buy. Even the manufacturer's website didn't have this info. Read more

$6.08

Compare At:: $6.69
You Save:: $0.61

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Sheet-Metal Pan Head)

4.5 (2)

By: Whirlpool

Part Number: WP59002061

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
Helps keep components aligned and secure during operation
Replace if the original is missing, rusted, stripped, or damaged
Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

What's included: One screw Install notes:

Disconnect power; shut off gas or water supply before servicing
Support the panel or part being attached; hand-start threads to avoid cross-threading
Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
If multiple matching screws secure a part, consider replacing them as a set for consistent hold

Do-It-Yourself Stories from Customers like You Spark electrode wires has aged and broke. Jonathan F. • Bartlett , TN • July 05, 2022

I ordered and replaced the old ignitor and the corroded mounting screws. Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Mgr55875qdw Parts

Flat Style Oven Igniter Kit

Oven Temperature Sensor

Oven Door Gasket

Oven Rack

Leveling Leg

Screw

Screw (10-32)

Screw, 1 Piece

Screw

Anti Tip Bracket

Screw

Burner Knob

Square Gas Drip Pans

Oven Valve (Gas)

Hex Nut

Screw (Sheet-Metal Pan Head)