Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove... Read more
If your oven won't heat or bakes unevenly, the bake element may be burned out. This is a simple 5-10 minute repair—just two screws and wire connectors.
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it... Read more
Oven won't heat to temperature or heats unevenly? This bake element provides consistent heat for proper baking. Easy 15-minute DIY repair—just 2 screws.
With my tools Read more
Illuminates your oven interior so you can monitor cooking without opening the door. Replace when burned out or dimming. Verify fit with your model number.
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more
Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.
Replaced the temperature sensor Read more
Inner door glass panel for range and wall oven doors. Replace if cracked, shattered, or slipped out of position. Installs between outer glass and oven cavity.
I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new. Read more
Range won't power on or tripped breaker? Burnt or loose terminal block connections are often the cause. This kit restores safe power delivery. DIY-friendly.
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly. Read more
Broiler not heating or turning red? This broil element restores high-heat broiling. DIY-friendly repair, typically takes 10-15 minutes with basic tools.
Fix F10 error codes and inconsistent oven temperatures with this sensor probe. Monitors internal temp for accurate cooking. Moderate DIY repair.
I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair. My wife just tried the stove and the oven temperature read exactly as the setting. Read more
Secures the ignitor assembly to your gas cooktop burner base. Replace if screw head is stripped, threads damaged, or screw is missing after disassembly.
It took a little longer then I was hoping but wasn’t terrible. If the burner is very old at all make sure to get the new screws. Both of mine snapped when trying to remove them. The new one works great. Read more
Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm! Read more
Replace worn, clogged, or damaged gas burner heads on your cooktop. Restores proper gas flow and flame distribution when old burners are dirty or corroded.
Bought new burner tops for all four burners. Lights great now with nice blue flames and no yellow. Read more
Gas burners won't ignite? A faulty spark module may be the issue. This part sends electrical current to igniters. DIY-friendly, takes minutes.
Watched repair video's to learn where parts were located. Put replacement in and it worked great! Read more
Gas burners won't ignite or igniter clicks continuously? The spark module generates the electrical spark to light burners. Direct plug-in repair.
Replaced the ignitor module ( a plug in direct replacement) a monkey could have performed this repair Read more
Burner cap sits on top of the gas burner assembly to distribute flame evenly. Replace if cracked, chipped, discolored, or missing for proper cooking.
I thought it was the burners and ordered four burners. When they arrived I thought three of them were wrong parts so I ordered three others and scheduled a return of three I had just received. I then realized it was not the burner but the diffuser plated on top of the burners. I cancelled the new order, arranged a return of the four initial burners and ordered four diffuser plated. The representatives were extremely helpful; and understanding. I was amazed adn happy that there was no... Read more
Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out. Read more