Wcre6270d0wwe6270d0ww Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
More
Genuine Ge part
By: Ge
Part Number: WH02X10383
This Tub Seal is an OEM replacement part for GE washing machines that is responsible for preventing water from leaking from the tub. This part is located at the base of the washing machine tub and creates a seal between the tub and the transmission to prevent water from leaking out during the wash cycle.
This part fixes the following symptoms-
- Water leaking from the underside of the washing machine.
- A musty or mildew smell coming from the machine.
- Unusual noises during use.
Causes of a bad tub seal can range from normal wear and tear to a misaligned tub or an overloaded washing machine, which puts extra pressure on the seal. Additionally, the buildup of hard water minerals can degrade the seal's material over time.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Various noises during opertation extremely loud grinding noise during spin cycle Dennis S. • Chelmsford , MA • November 27, 2017
I put this repair off for a long time because I knew the machine would have to be completely torn down to fix it. The repair videos give you the impression that this condition is caused by a bad 'Tub Bearing' which takes a long time to replace but only costs about $15. Don't be lulled into thinking you can fix this for $15. The 'Tub Bearing' is really only a bushing. The one I removed from my washer looked fine but I replaced it anyways. The real problem here is GE's poor design which allows a...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WH2X1197
This tub-bearing washer is an OEM replacement part for GE washing machines. It is designed to keep your washing machine's inside tub spinning smoothly during cycles. The bearing Measures approximately 1 inch in inner diameter and 2 inches in outer diameter.
Causes of a bad tub-bearing washer can include wear and tear from extended use. Exposure to vibrations during high-speed spins may cause fatigue of the washer material over time as well.
Symptoms of a bad tub bearing washer include:
- Excessive tub vibration or imbalance at high speeds
- Abnormal noises such as grinding or clicking sounds
- Premature failure of the tub bearing itself
- Reduced spin capabilities or inability to hit maximum RPM
This OEM part is also compatible with Hotpoint, RCA and select Kenmore front-load washers.
Do-It-Yourself Stories from Customers like You
Ge washer making loud roaring noise during spin cyc;e Gerald P. • Auburn , GA • January 28, 2018
I had never worked on a washing machine before but after watching the online videos I felt like I could do the repair. I was almost positive it was the Mode Shifter and Shaft Assembly that was bad. I could hear the bearing making a grinding noise when I turned the tub by hand. I ordered the part I needed plus additional parts that could be an issue later such as a drive belt, tub bearing, tub seal, tub nut, split ring, etc; Preventive maintenance that would keep from having to tear it all...
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WH41X10096
The Drain Hose is an OEM part for GE washing machines. It plays a crucial role in expelling used water from the washer to the household drainage system. If you need to replace the drain hose clip as well, order part number WH16X513.
Causes of a bad Drain Hose can include physical damage such as splits or holes, clogging from lint and debris, or deterioration due to age and frequent exposure to water and detergents.
Symptoms of a bad Drain Hose include:
- Water leaking from the back or underneath the washing machine,
- Slow or incomplete drainage during or after the wash cycle,
- Visible signs of wear or damage on the hose.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking washer drain hose Oliver C. • Linwood , NJ • July 16, 2014
Replaced hose with new one from Appliance Parts. Delivery was exceptionally fast. Appliance was up and running next day.
Read more
More
$17.95
- Compare At:
-
$24.06
- You Save:
-
$6.11
Genuine Ge part
By: Ge
Part Number: WH43X10034
The Agitator Assembly is an OEM part for GE washing machines. This essential component is responsible for moving clothes during the wash cycle, ensuring thorough cleaning by continually shifting the laundry within the drum. The agitator's design includes fins or vanes that help to circulate water and detergent through the clothes, effectively removing dirt without causing excessive wear to the fabric.
Symptoms of a bad Agitator Assembly include:
- The agitator not moving or only moving weakly during the wash cycle.
- Unusual noises like grinding or thumping indicating mechanical issues.
- Clothes coming out still dirty or less clean than expected, suggesting insufficient agitation.
- The top portion of the agitator moving independently from the base, known as "stripped" agitator dogs.
Causes of a bad agitator can include worn out mechanical parts such as gears or bearings, a damaged drive shaft, or the agitator becoming detached from the transmission due to loosening of the securing bolt.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models,
Pro Tip: When replacing the agitator, also consider replacing the agitator coupling (WH49X10042).
Do-It-Yourself Stories from Customers like You
Fin on agitator broke agitator needed replacing Karen P. • Tyler , TX • February 05, 2018
Ordered agitator. Removed old agitator by prying up one side of the agitator and then moving the agitator around in a circle while prying up a little at a time because the clips pop off underneath separately and once a few of them come loose the remaining slide off making a clean removal rather than the "jerking-straight-up-and-into-your-face-and-neck-disaster-waiting-to -happen removal". Cleaned salt buildup from using brand name household detergent for the last 4 months (currently in rental...
Read more
More
$53.56
- Compare At:
-
$66.31
- You Save:
-
$12.75
Genuine Ge part
By: Ge
Part Number: WH01X39337
This tub dampening strap stabilizes the washer's inner tub during agitation and spin to control vibration and sway. Replacing worn straps restores proper suspension control for smoother, quieter operation and helps prevent the tub from impacting the cabinet. What it does:
- Connects the tub to the cabinet to limit excessive movement during spin
- Controls vibration and helps prevent the tub from striking the cabinet
- Replace if a strap is broken, stretched, or missing
- Symptoms can include loud banging, severe shaking, or the washer "walking"
What's included:
Install notes:
- Unplug the washer and turn off water supply before servicing
- Support the tub to relieve tension, then unhook the old straps from the cabinet and tub ring
- Install new straps on the original mounting points; replace in pairs to keep the tub balanced
- Run a test spin and verify smooth, stable operation
Do-It-Yourself Stories from Customers like You
GE washer sounded like jet engine during spin cycle Scott V. • Centreville , VA • August 26, 2020
My 9-year-old GE washer, in which I replaced the motor two years ago, developed an extremely loud roaring sound during the spin cycle. After reviewing stories here to pinpoint the problem, I replaced the tub bearing, mode shifter, and tub seal. I also installed a new tub nut, split washer, and belt.
This repair involves taking the washer apart in order to get at the tub bearing and mode shifter, which are inconveniently located in the very center of the machine. I bagged labeled all the...
Read more
More
$19.80
- Compare At:
-
$22.00
- You Save:
-
$2.20
Genuine Ge part
By: Ge
Part Number: WH49X10042
The Washer Agitator Coupler Kit is an OEM part for GE washing machines. This kit includes the coupler component that connects the agitator to the washing machine's transmission. It plays a pivotal role in the washing process by transmitting rotational force from the motor to the agitator, enabling it to move back and forth and effectively clean clothes.
Symptoms of a bad Washer Agitator Coupler include:
- The agitator failing to move or moving weakly during cycles, which can result in poorly washed clothes.
- Unusual noises from the washing machine during operation, indicating a mechanical issue.
- The agitator slipping or feeling loose when manually pushed or pulled.
Causes of a bad agitator coupler can include wear and tear from regular use, excessive load sizes that strain the agitator, or material fatigue that weakens the coupler over time.
This OEM replacement part is essential for restoring proper functionality to your GE washing machine and is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
MY GE washer didn't agitate anymore. Jane P. • Mastic Beach , NY • March 21, 2014
OMG.. I was so excited when I found a simple YOUTUBE video showing me how to fix this agitator myself.. and it was SO SIMPLE!
The MEN I know, told me I would need to buy a new machine!
I did a simple search for GE AGITATOR REPAIR.. found the video, then did my search for the replacement part - an agitator coupling, which, of course, I found at AppliancePartsPros.com... they shipped it to me within 2 days! And the minute it arrived, I went into my laundry room, and completed my OWN repair in...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Ge part
By: Ge
Part Number: WH23X10030
The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.
Symptoms of a bad Drain Pump include:
- Water not draining out of the washer, leading to stagnant water pooling in the tub.
- Unusual noises during the drain cycle, indicating a struggle or failure to operate.
- The washing machine stopping abruptly before or during the drain phase.
Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water pump on washer went bad Joshua B. • Morrow , OH • March 19, 2017
I ordered a new pump on this website. They provided me with written directions as well as a video to follow along with on how to change the pump. As always it wasn't as easy as the video, but that was the mechanic no the tool! Great job on the service. Will order parts from here again.
Read more
More
$55.66
- Compare At:
-
$82.48
- You Save:
-
$26.82
Genuine Ge part
By: Ge
Part Number: WH1X2026
The Drive Belt is an OEM part for GE washing machines. It functions as a critical component that connects the motor to the drum, transferring power from the motor, which in turn allows the drum to spin during the wash cycle. Made from rubber reinforced with fibers, this belt is designed to withstand the stress of spinning and agitating motions.
Symptoms of a bad Drive Belt include:
- The washing machine drum not spinning,
- A squealing or screeching sound when the washer is running,
- Visible fraying, glazing, or signs of wear on the belt,
- The belt slipping off the motor or drum pulley.
Causes of drive belt failure typically include regular wear and tear from use, overloading of the washer which puts extra strain on the belt, or exposure to oils and other substances that can degrade the rubber.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Burning smell
-
Spins slowly
-
Pumps but will not spin
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Transmission making loud noise during agitation cylces Mark P. • Shakopee , MN • February 02, 2016
Ordered new transmission, nut, split washer and spanner wrench to do the install.
very straight forward fix after watching the video. spanner wrench is a must or the correct large socket with an impact driver. it was corroded on pretty well let the liquid wrench work for a while and then beat it off.
approximately 2 hours to do to fix, spent some time cleaning stuff up also though. washer was 12 years old and debated scrapping it and getting a new one but then it would not match the dryer. ...
Read more
More
$7.73
- Compare At:
-
$23.06
- You Save:
-
$15.33
Genuine Ge part
By: Ge
Part Number: WH16X513
The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.
Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.
Symptoms of a bad drain hose clip include:
- Water leaking from the back of the washer
- Drain hose detaching or becoming loose during operation
- Difficulty securing the drain hose in place
- Visible damage or cracking on the clip
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Note: For the entire drain hose, use part number WH41X10096.
Do-It-Yourself Stories from Customers like You
Discharge hose for 15 year old hot point washer Edith P. • Shelton , CT • October 06, 2014
The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars,
Read more
More
$7.37
- Compare At:
-
$8.36
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WH13X10024
The Water Inlet Valve is an OEM part for GE washing machines. This component is crucial for controlling the flow of water into the washer during the wash and rinse cycles. It works by opening and closing the solenoids to allow the appropriate amount of hot or cold water to enter the washing machine, based on the selected settings.
Symptoms of a failing Water Inlet Valve include:
- The washing machine not filling with water or filling very slowly
- The washer filling with water even when it is turned off
- Water leaking from the valve area
- The washing machine displaying error codes related to water supply issues
- Inconsistent water temperatures during cycles
Causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, wear and tear on the solenoid coils, or electrical issues such as faulty wiring or connections.
This OEM GE part is also compatible with some models from Hotpoint, RCA, and Kenmore.
This part fixes the following symptoms
-
No hot or cold water
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
There was a small water leak into the tub when the washer was off Jack C. • Atlanta , GA • July 16, 2014
Ordered water inlet valve. Two screws to take out. Disconnect the hose. Disconnect the two wires. Put in the new valve. Reverse the procedure. Whole thing took about 10 minutes.
Read more
More
$76.44
- Compare At:
-
$90.96
- You Save:
-
$14.52
Genuine Ge part
By: Ge
Part Number: WH41X365
The Pressure Switch Hose is an OEM part for GE washing machines. It connects the pressure switch to the tub, allowing the switch to monitor the water level within the washing machine. This ensures the proper amount of water is used during each cycle for efficient washing and rinsing.
You should replace this pressure switch hose if it becomes cracked, clogged, or otherwise damaged. Common causes of a bad hose include wear and tear from repeated use, buildup of detergent or debris, and damage from improper handling or installation.
Symptoms of a bad pressure switch hose include:
- Washing machine not filling with water
- Overfilling or underfilling of the tub
- Inaccurate water level detection
- Error codes related to water level issues
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Water level shutoff switch did didn't work allowing the washer tub to overfill William H. • Papillion , NE • March 22, 2015
I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch.
Read more
More
$11.33
- Compare At:
-
$13.48
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WB1X500D
These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.
This part fixes the following symptoms:
- Loose or wobbly parts or panels within the appliance's interior or exterior
- Panels or components falling out of place, creating gaps or exposing internal parts
- Unusual noises or rattling sounds during the appliance's operation
The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014
I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle.
https://www.youtube.com/watch?v=cQwLtRcHx9k
Read more
More
$7.65
- Compare At:
-
$9.10
- You Save:
-
$1.45
Genuine Ge part
By: Ge
Part Number: WH01X10060
The Selector Knob is an OEM part for GE washing machines. This knob is used to choose different wash cycles and settings on the control panel, allowing users to customize their laundry preferences. It is designed to fit securely onto the control shaft and provide smooth operation for selecting various options.
Over time, selector knobs can wear out or become damaged due to frequent use or accidental impacts. Causes of a bad selector knob can include cracked or broken plastic, stripped or worn-out internal components, or a loose fit on the control shaft.
Symptoms of a bad selector knob include:
- Difficulty in turning the knob or selecting settings
- Knob spinning freely without changing settings
- Knob falling off or feeling loose
- Visible cracks or damage on the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken selector knob Philip O. • Gastonia , NC • June 01, 2014
I ordered a new knob and it arrived very quickly. The repair was simple and I will use appliance parts pros again should I need to. Thank you.
Read more
More
$15.52
- Compare At:
-
$21.72
- You Save:
-
$6.20
Genuine Ge part
By: Ge
Part Number: WH12X10462
The Capacitor is an OEM part for GE washing machines. It stores and releases electrical energy to help start the motor and regulate its speed, ensuring the washer operates efficiently and reliably. This component is crucial for maintaining the performance and longevity of the washing machine.
Causes of a bad capacitor can include electrical surges, wear and tear from regular use, or physical damage due to impact. Over time, capacitors can degrade, leading to reduced functionality or complete failure. Regular inspection can help identify potential issues early.
Symptoms of a bad capacitor include:
- The washer not starting or struggling to start
- Motor running inconsistently or not at full speed
- Unusual noises during operation
- Error codes related to motor function
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Hotpoint vlsr1090g5ww wouldn't agitate or spin. Chuck G. • Douglas , MI • October 03, 2022
Washer would run through the cycle, but not agitate. I had to wait for it to pump down the water level to check spin, which also was not working. The motor would buzz when it should run, but not rotate, hard to hear for spin because the pump was running. Found I could start it by hand very easily by giving the pulley a spin, so I figured start switch, but there didn't appear to be one. I found what looked like a start capacitor zip tied to the chassis midway up the front, so my second guess was...
Read more
More
$35.45
- Compare At:
-
$42.19
- You Save:
-
$6.74
Genuine Ge part
By: Ge
Part Number: WH01X10088
The Button is an OEM component for GE top-load washers. Located on the control panel, this button actuates a specific function such as starting or pausing the cycle. Designed for durability, the textured plastic construction withstands millions of presses over decades of use.
Symptoms of a bad button include:
- The button sticking in the depressed position
- Failure to trigger the assigned function when pressed
- Cracks developing in the plastic face over time
Causes may consist of cracked circuitry behind the panel from water intrusion or repeated impact. General wear reducing button sensitivity also occurs.
This GE button restores full operation for select models including those by Hotpoint, RCA, and compatible Kenmore lines.
Do-It-Yourself Stories from Customers like You
The posh button was gone Steven B. • Ute , IA • April 17, 2015
All I had to do was remove 3, 1/4" screws from the back and take the front off. Two 5/16th screws hold the circuit board in place, remove them and press the button into the hole from the back. Replace the circuit board, slide the front back on and install the three 1/4" screws. Always unplug the washer first!
Read more
More
$13.66
- Compare At:
-
$16.12
- You Save:
-
$2.46