Parts for Amana ART308FFDB00: Shelf Parts

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

This wire shelf provides a sturdy, ventilated storage surface designed to hold food and containers inside the refrigerator cabinet. It restores proper organization and airflow when a shelf is missing, bent, or corroded. What it does

• Replaces a damaged or missing refrigerator wire shelf to support food, containers, and small appliances.
• Maintains proper airflow between compartments to help even cooling.
• Prevents items from falling through warped or broken shelving.
• Helps restore proper spacing and organization inside the cabinet.

• Remove all contents from the shelf area before installing; handle edges carefully—wire ends can be sharp.
• Most installations are drop-in or slide-on; align shelf supports or rails and seat the shelf fully into position.
• No special tools typically required; if shelf uses clips or brackets, retain and reuse existing hardware unless damaged.
• If rust or other damage is present on adjacent supports, inspect and replace those parts as needed for a secure fit.

This wire shelf replaces a damaged or missing refrigerator shelf to restore stable storage and proper airflow in the fresh-food compartment. It provides a durable, easy-to-clean surface for storing food and containers. What it does

• Replaces a bent, rusted, or broken wire shelf to restore usable storage space
• Supports food and containers while allowing cold air to circulate for even cooling
• Helps prevent items from falling or shifting during door openings
• Fits onto existing shelf supports or slide rails for a secure fit

• One wire shelf as shown

• Remove all contents and unplug the refrigerator or turn off power at the breaker before starting
• Lift old shelf straight up or unhook from supports, then set replacement shelf onto the same supports or rails
• No special tools typically required; use gloves to avoid sharp wire edges
• Verify shelf is level and secure before returning food to the compartment

This left-side bottom crisper track supports and guides the refrigerator's crisper drawer. Replacing a worn or broken track restores smooth sliding and proper alignment so the bin opens, closes, and seats correctly.

• Supports the crisper drawer on the cabinet's left bottom side
• Provides a smooth slide path for consistent opening and closing
• Helps keep the bin level so it seats and seals properly
• Common symptoms: drawer sticks, sags, falls out, won't close fully, or the track shows cracks/broken tabs

• Disconnect power and remove food from the affected drawer area before servicing
• Remove the crisper drawer and any glass shelf above it
• Detach the old track (remove screws or release tabs) and retain hardware for reuse
• Position and secure the new track, then reinstall the shelf and drawer; test for smooth operation
• Orientation note: "Left" is determined when facing the front of the refrigerator

This track guides and supports a drawer so it opens and closes smoothly, restoring proper alignment and preventing sticking or the drawer from falling off its slide. Use when the drawer binds, drops, or moves unevenly. What it does:

• Guides the drawer along its intended path for smooth opening and closing
• Supports and aligns the drawer to prevent binding, catching, or sagging
• Restores even movement when a drawer comes off its slide or won't glide properly
• Helps maintain secure drawer positioning under normal loading

• Disconnect power to the appliance (when applicable) and remove all contents from the drawer before servicing
• Remove the drawer to access the old track; keep original screws/fasteners and note orientation for reinstallation
• Align the replacement track with the mounting points and secure with the original hardware; avoid overtightening
• Test drawer movement and adjust alignment as needed

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement glass shelf that restores stable storage and visibility inside your refrigerator. Tempered glass provides a flat, easy-to-clean surface for organizing food and preventing spills from reaching lower compartments. What it does:

• Provides a sturdy, level surface for storing food and containers
• Helps contain spills and makes cleanup faster and easier
• Restores proper shelf spacing and organization after a broken or missing shelf
• Improves visibility of items by offering a clear, flat storage plane

• Remove all items from the refrigerator and power off the appliance before installing
• Handle glass with care; use gloves to avoid cuts and prevent fingerprints
• Slide or set the shelf into the existing shelf supports or trim until fully seated
• Replace damaged shelf supports or trim before installing the glass

This shelf trim is the front-facing plastic trim piece that restores the finished edge and helps keep items from sliding off a refrigerator shelf. It replaces cracked, chipped, or missing trim for a clean, secure shelf edge. What it does:

• Restores the finished front edge of a refrigerator shelf for a neater appearance
• Helps keep stored items from sliding forward off the shelf
• Replaces cracked, broken or missing shelf trim that can catch or snag
• Matches OEM fit and mounting style for straightforward replacement

• One shelf trim piece

• Remove the shelf and align the trim over the front edge; press until it snaps into place
• Support the shelf while installing to prevent dropping or damage
• No electrical disconnection required; work with the unit door open for access
• If trim resists, inspect for broken clips or debris and clear before forcing