Parts for Amana ART308FFDB07: Shelf Parts

This refrigerator crisper pan replaces a cracked or missing produce drawer. It restores smooth sliding and dependable storage for fruits and vegetables, keeping items organized and contained in the fresh food compartment.

• Provides a dedicated bin for produce in the fresh food section
• Slides on the crisper rails beneath the crisper cover/shelf
• Helps contain leaks and prevent items from falling into the compartment
• Replaces a drawer that is cracked, chipped, warped, jammed, or missing

• Fully open the refrigerator door and remove items from the old drawer
• Pull the drawer to the stop, lift the front, then angle up and out to remove
• Inspect/clean the rails and underside of the crisper cover before installation
• Align the new pan with the tracks and slide in until it is fully seated; do not force

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

This wire shelf replaces a damaged or missing refrigerator shelf to restore stable storage and proper airflow in the fresh-food compartment. It provides a durable, easy-to-clean surface for storing food and containers. What it does

• Replaces a bent, rusted, or broken wire shelf to restore usable storage space
• Supports food and containers while allowing cold air to circulate for even cooling
• Helps prevent items from falling or shifting during door openings
• Fits onto existing shelf supports or slide rails for a secure fit

• One wire shelf as shown

• Remove all contents and unplug the refrigerator or turn off power at the breaker before starting
• Lift old shelf straight up or unhook from supports, then set replacement shelf onto the same supports or rails
• No special tools typically required; use gloves to avoid sharp wire edges
• Verify shelf is level and secure before returning food to the compartment

This wire shelf provides a sturdy, ventilated storage surface designed to hold food and containers inside the refrigerator cabinet. It restores proper organization and airflow when a shelf is missing, bent, or corroded. What it does

• Replaces a damaged or missing refrigerator wire shelf to support food, containers, and small appliances.
• Maintains proper airflow between compartments to help even cooling.
• Prevents items from falling through warped or broken shelving.
• Helps restore proper spacing and organization inside the cabinet.

• Remove all contents from the shelf area before installing; handle edges carefully—wire ends can be sharp.
• Most installations are drop-in or slide-on; align shelf supports or rails and seat the shelf fully into position.
• No special tools typically required; if shelf uses clips or brackets, retain and reuse existing hardware unless damaged.
• If rust or other damage is present on adjacent supports, inspect and replace those parts as needed for a secure fit.

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement crisper shelf fits the fresh-food compartment to restore a stable storage surface and keep produce drawers supported and organized. Ideal when the original shelf is cracked, chipped, warped, or missing. What it does:

• Provides a flat support for crisper drawers and stored items to prevent sagging or collapse
• Replaces damaged, cracked, or broken crisper shelving
• Helps stop items from falling into the crisper area and keeps contents organized
• Matches the original white finish and 30" width for proper fit where specified

• Remove all contents from the shelf area before installing
• Lift old shelf straight up/out of the support tracks; slide new shelf into the same tracks until seated
• Handle carefully—use gloves if glass or brittle plastic is present