Parts for Whirlpool WRF992FIFH00: 08 - Shelf Parts

This hard plastic divider separates compartments inside a refrigerator drawer or bin to keep food organized and prevent items from shifting. It restores proper spacing so drawers hold produce and packaged items more securely. What it does:

• Fits into a compatible refrigerator drawer to create two storage sections
• Helps keep fruits, vegetables and deli items separated and upright
• Reduces shifting and collision of stored items when opening or closing the drawer
• Simple replacement for a cracked, broken or missing drawer divider

• One replacement divider

• Remove the drawer from the refrigerator for easier access before installing
• Slide or snap the divider into the molded slots in the drawer; do not force
• Inspect drawer rails and slots for debris or damage before reinstalling
• For safety, handle parts with care and avoid placing fingers where they can be pinched

This small, spring-action push latch mounts in trim or liner to secure a flip-down compartment door or cover. Replacing a worn latch restores a positive close and smooth push-to-open operation to the affected door or panel.

• Provides the push-to-latch/push-to-release catch for a small door or cover
• Helps prevent nuisance pop-opens and rattling
• Common symptoms: door/cover won't stay shut, latch feels loose, cracked or missing latch
• Restores proper engagement and closing feel

• Disconnect power to the appliance before starting
• Open the compartment; depress retaining tabs or gently pry the old latch straight out
• Match orientation and snap the new latch fully into the opening
• Test operation: close to latch, press to release

This replacement shelf stud secures a refrigerator shelf or door bin to the liner, restoring proper support and preventing shelves from sagging or coming loose. Easy way to repair a cracked, broken, or missing shelf anchor. What it does

• Mounts into the liner to hold a shelf or door bin securely in place
• Restores correct shelf alignment and prevents sliding or tipping
• Stops shelves from sagging or falling when weight is applied
• Common fix when the original stud is cracked, stripped, or missing

• Remove food and shelves/bins from the area before replacing the stud
• Install by pressing or snapping into the liner; use gentle hand pressure or appropriate non-marring tools
• Do not force or overtighten; check that the shelf/binnests seat securely after installation

A shelf mounting stud that secures a shelf or shelf bracket to the cabinet, helping restore proper shelf alignment and prevent slipping or dropping of items. Simple replacement keeps shelving stable and usable. What it does:

• Anchors a shelf or shelf bracket to the cabinet frame for secure support.
• Prevents shelf movement, sagging, or falling that can occur when a stud is cracked, bent, or missing.
• Restores correct shelf alignment so glass or wire shelving sits level and locks into place.
• Small, low-profile replacement used where original mounting studs have worn or broken.

• Disconnect power to the appliance before working near electrical components; remove stored items from the shelf first.
• Use basic hand tools to remove the old stud and install the replacement; retain original hardware if undamaged.
• Inspect surrounding shelf clips/brackets and the shelf edge for wear; replace damaged components to ensure a safe repair.

This handle pan is the replacement door-handle trim that restores a finished look and provides a secure grip for opening the appliance door. It replaces damaged or cracked trim to improve appearance and usability. What it does

• Covers and supports the door handle area, protecting the mounting hardware
• Restores a solid grip when original trim is cracked, broken, or missing
• Helps keep the handle stable and reduces wobble from damaged trim
• Visible cosmetic repair that returns the door to a finished appearance

• One handle pan as shown

• Disconnect power or unplug the appliance before starting any repair
• Remove any handle screws or trim fasteners, then lift or snap out the old pan per OEM instructions
• Align new pan and secure using existing hardware; do not overtighten fasteners

This crisper pan is the refrigerator drawer used to hold fruits and vegetables while helping contain spills and keep items organized. It restores a missing, cracked, or damaged drawer so food stays contained and easy to access. What it does:

• Serves as the removable bottom drawer for the produce/crisper compartment
• Contains spills and prevents loose produce from falling into the cabinet
• Allows the drawer to slide in and out for easy access to stored items
• Commonly replaced when cracked, chipped, warped, or not sliding properly

• One crisper pan/drawer

• Remove contents from the refrigerator and slide out the old drawer; lift straight up to unseat if needed
• Handle carefully—if glass or brittle plastic, wear gloves to avoid cuts from damaged edges
• Verify correct orientation and that rails or tracks are aligned before seating the pan
• If the drawer mounts to a cover or humidity control, those pieces are present and reattach per manufacturer guidance

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal