Parts for Whirlpool WRX988SIBB01: 08 - Shelf Parts

This is a glass shelf that serves as a genuine replacement for shelves in refrigerators. The glass shelf is used to store food in the refrigerator. If the shelf is not fitting correctly, or if it has been damaged, it should be replaced as soon as possible.Refrigerator shelves may crack or break from impact or being overloaded with heavy food. A broken shelf can be dangerous, so owners will want to handle the repair as soon as they can. Installation is easy, but owners should wear gloves to keep their hands safe.This glass shelf will work with Frigidaire refrigerators. The shelf is sold individually, and it is a genuine OEM replacement part sourced from the manufacturer.

This replacement crisper pan restores the storage surface in your refrigerator's fresh-food compartment so fruits and vegetables sit securely and the drawer area stays clean. It fits into the crisper area and supports produce. What it does:

• Provides a stable, flat pan for storing fruits and vegetables
• Replaces cracked, warped or damaged pans that let items sag or shift
• Helps contain spills and keeps the crisper drawer area cleaner
• Works with the refrigerator's crisper drawer assembly to support proper storage

• Remove all food from the drawer area before installing
• Slide the new pan into the crisper opening until it seats; avoid forcing it
• Handle carefully — if glass, place on a padded surface to prevent breakage

The Crisper Drawer Frame is an OEM part for Whirlpool refrigerators. This part supports and contains the crisper drawers where fruits and vegetables are stored. This frame includes tracks or guides to allow the drawers to slide in and out smoothly, as well as sometimes providing structural support for the shelves above it. 

Causes of a bad Crisper Drawer Frame can range from overloading the drawers with too much weight, accidental damage during cleaning, or general wear and tear over time. 

Symptoms of a bad Crisper Drawer Frame include:

• Cracks or breaks in the frame, leading to instability or difficulty in sliding the drawers.
• Warping or damage, preventing proper alignment within the refrigerator.
• Broken tracks or guides, making drawer movement stiff or uneven.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: White

This glass shelf provides a flat, stable storage surface inside the refrigerator to help organize food and containers. It replaces damaged, cracked, or missing shelves to restore usable shelf space and proper storage. What it does:

• Replaces an interior refrigerator shelf that holds food containers and items
• Restores level storage when the original shelf is cracked, chipped, or broken
• Helps keep spills contained on a removable surface for easier cleaning
• Fits into existing shelf support rails to reestablish proper shelf spacing

• Remove all contents from the shelf area before installing to avoid spills or injury
• Slide the shelf into the existing support rails or brackets until it seats securely
• Handle carefully and lift straight to avoid chipping; wear gloves to reduce risk of cuts
• If shelf support rails or clips are damaged, replace them before installing the new shelf

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

This drive gear transmits motor motion into the washer transmission so the tub can agitate and spin. Replacing a worn or broken drive gear restores proper drivetrain engagement and reduces grinding or slipping symptoms. What it does:

• Transfers rotational force from the motor/shaft to the transmission or agitator assembly
• Stops grinding, slipping, or intermittent agitation caused by damaged gear teeth
• Helps restore normal spin and agitation cycles when drivetrain wear is the cause
• Works as a mechanical replacement part—does not include seals or bearings

• One drive gear

• Disconnect power and water before beginning any repair
• Access requires removing the washer cabinet or transmission cover; follow the manufacturer's service manual
• Inspect adjacent components (shaft, retention clip, seals) and replace if damaged

The Freezer Drawer Gear Clip is an OEM part for Whirlpool refrigerators. It is designed to secure the gear mechanism that allows the freezer drawer to slide in and out smoothly. This clip ensures that the drawer operates efficiently, providing easy access to the freezer compartment.

Causes of a bad gear clip can include wear and tear from regular use, damage due to overloading the drawer, or breakage from accidental impact. A faulty gear clip can impair the drawer’s movement and make it difficult to open or close properly.

Symptoms of a bad refrigerator freezer drawer gear clip include:

• The freezer drawer not sliding smoothly
• Difficulty in opening or closing the drawer
• The drawer coming off its track
•  Unusual noises during the drawer’s operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A small mounting screw used to secure appliance panels and components. This genuine replacement restores proper fit and reduces vibration or loose parts when a missing or stripped fastener causes fit issues. What it does:

• Secures panels, trim, or internal components to the appliance frame
• Helps stop rattling or movement caused by a missing or loose screw
• Restores correct alignment where a fastener is lost or damaged
• Works as a direct-fit replacement when the original screw is worn or stripped

• The screw shown/listed

• Disconnect power (and gas if applicable) before any repair
• Use the matching screwdriver or driver bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage
• Keep small parts away from children and store removed hardware for reference

This replacement divider helps separate and organize items inside the refrigerator, keeping food better arranged for easier access and storage. It restores proper spacing and reduces shifting of contents. What it does:

• Separates compartments on a shelf or inside a drawer to keep foods organized
• Helps prevent items from sliding or shifting during door movement
• Restores proper spacing when a broken or missing divider causes clutter
• Simple passive part with no electrical components

• Disconnect power only if working near electrical components; generally a no-tools snap/slide install
• Remove shelf or drawer as needed to access the divider slot
• Align and slide or snap the divider into the existing track or locator tabs until secure
• Handle carefully to avoid chipping or cracking plastic; replace if damaged

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

• The refrigerator fails to resume cooling after closing the door
• The inside light fails to turn on when the door is opened
• Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This heater is the dryer's heating element assembly that warms air used to dry clothes. Replacing a failed heater restores proper drum heat so the dryer can complete normal drying cycles. What it does

• Generates the hot air flow that removes moisture from clothes
• Common symptom: no heat or very low heat during drying cycles
• Can cause long dry times, damp laundry, or repeated cycles
• May fail from broken element, open thermal fuse, or worn connections

• Disconnect power at the breaker before starting work; for gas dryers also shut off the gas supply
• Allow the appliance to cool and avoid contact with sharp edges; handle terminals carefully
• Inspect wiring and thermal fuses for damage when replacing the heater

This drum support roller replaces a worn or noisy dryer roller that helps the drum turn smoothly. Restores quiet, even drum rotation for improved drying performance and reduced wear on the drive system. What it does:

• Supports the dryer drum so it spins evenly during operation
• Reduces vibration and noise caused by worn or seized rollers
• Helps prevent premature wear on the belt and drive components
• Common symptom: loud rumbling, squeaking, or visible drum wobble during spin

• Disconnect power to the appliance before any service
• Replace worn or damaged rollers in matched pairs when recommended by the OEM
• Inspect the shaft, bearing surface, and belt for wear and replace if needed

The Thermistor is an OEM part for Whirlpool refrigerators. As a temperature-sensitive sensor, it tracks compartment climates to maintain fresh food safety.

Causes of a bad thermistor involve cracking of its insulated body allowing moisture, as well as typical wear disrupting conductivity after years of use. 

Symptoms include: 

• Fluctuating temperatures conducive to bacterial growth  
• Constant compressor operation without reaching targets
• Error codes or inability to adjust temperature settings

This OEM Whirlpool part is also compatible with some Kenmore, Maytag, and KitchenAid models.

The Glass Shelf is an OEM part for Whirlpool refrigerators. This shelf provides a stable and durable surface for storing food items within the refrigerator, helping to keep the interior organized and allowing easy access to stored items.

Causes of a bad glass shelf can include accidental impacts, overloading with heavy items, or thermal stress from placing hot containers directly on the glass.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting securely in place
• Difficulty in removing or adjusting the shelf
• Items not being properly supported, leading to instability

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This refrigerator door bin restores secure storage on your door when the original shelf is cracked, loose, or missing. It snaps into the factory slots to hold bottles and condiments and keep items from tipping during use.

• Provides organized storage on the door for jars, bottles, and condiments
• Replaces a broken, warped, or missing bin to restore capacity
• Helps keep items upright during door opening and closing
• Common symptoms: cracked plastic, bin falling off the door, items not staying in place, door rubbing due to a deformed bin

• Disconnect power to the refrigerator before servicing
• Remove items, then lift the old bin straight up and off the door tabs/rails
• Align the new bin with the tabs and press down until it seats securely
• Verify the bin is level and firmly latched; avoid overloading after installation

This refrigerator door bin restores secure storage on your door when the original shelf is cracked, loose, or missing. It snaps into the factory slots to hold bottles and condiments and keep items from tipping during use.

• Provides organized storage on the door for jars, bottles, and condiments
• Replaces a broken, warped, or missing bin to restore capacity
• Helps keep items upright during door opening and closing
• Common symptoms: cracked plastic, bin falling off the door, items not staying in place, door rubbing due to a deformed bin

• Disconnect power to the refrigerator before servicing
• Remove items, then lift the old bin straight up and off the door tabs/rails
• Align the new bin with the tabs and press down until it seats securely
• Verify the bin is level and firmly latched; avoid overloading after installation

Color: Black

Color: Stainless

The Door Handle Mounting Screw is an OEM part for Whirlpool refrigerators. It secures the door handle to the refrigerator door.

Causes of a bad door handle mounting screw can include wear and tear over time, improper installation, or excessive force applied to the handle. These factors can result in a loose or wobbly handle, compromising the functionality and aesthetics of your refrigerator.

Symptoms of a bad door handle mounting screw may include:

• A loose or unstable handle
• Difficulty in opening or closing the refrigerator door
• The handle becoming detached

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The LED Module is an OEM part for Whirlpool refrigerators. This module plays a role in illuminating the inside of the refrigerator and freezer compartments. Properly functioning LED lights are necessary for visibility when accessing refrigerator contents.

Over time, exposure to temperature fluctuations and general use can cause LED modules to fail or burn out prematurely. Replacing this OEM Whirlpool part will restore full illumination inside your refrigerator.

Symptoms of a bad LED Module can include:

• Dim or flickering lights inside the refrigerator or freezer
• Partial lighting with some LEDs not working
• Lights that will not turn on at all

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pantry Drawer Wiring Harness is an OEM part for Whirlpool refrigerators. This wiring harness connects the electrical components of the pantry drawer, ensuring proper functionality and temperature control within the drawer. It helps maintain the correct temperature settings and allows for the smooth operation of the pantry drawer features.

Causes of a bad wiring harness can include wear and tear from regular use, damage from accidental pinching or pulling, or electrical faults that disrupt the connection.

Symptoms of a bad pantry drawer wiring harness include:

• Pantry drawer not maintaining the correct temperature
• Inconsistent or fluctuating temperatures within the drawer
• Pantry drawer features not working
• Error codes related to the pantry drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This electronic control board is the appliance's main control, coordinating sensors, switches, and the user interface so cycles run correctly. Replacing a failed board restores operation when the unit is unresponsive, stuck in a cycle, or behaving erratically.

• Coordinates the timing and sequence of operations based on selected settings
• Sends power to motors, valves, heaters, fans, and lights as needed
• Monitors inputs from sensors and switches to adjust performance and protect components
• Common symptoms: won't start or power on; unresponsive controls; cycle won't advance; intermittent operation
• Stores or displays/blinks error codes when faults are detected

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD/anti-static precautions; handle the board by its edges
• Photograph wiring and move connectors one at a time to the new board
• Refer to the unit's tech sheet for any required configuration or post-install service test

This support secures a mating part inside the appliance, keeping it properly positioned and stable during operation. Replacing a cracked or missing support restores correct fitment and helps prevent looseness, vibration, and related performance issues.

• Holds the associated shelf/panel/assembly in place
• Maintains alignment to reduce movement and rattling
• Replaces broken, warped, or missing support hardware
• Common symptoms: loose or sagging component, rattling noises, difficulty keeping the part seated, visible cracks or broken tabs

• Disconnect power; shut off water before servicing
• Note the original orientation and mounting points before removal
• Transfer and reuse existing screws/clips as required; seat the new support fully and tighten fasteners carefully to avoid damage
• The supported component sits level and secure before restoring power