Parts for Lawn Chief 136L673F722 / 1996: Steering Assembly, Axle, Front Wheels Parts

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a variety of outdoor appliances including lawn mowers, snowblowers, and tillers.The hex screw in an outdoor appliance might have to be replaced if it is lost, misplaced, or stripped. The hex screw is a small component which can be easily lost during maintenance. It can also be damaged by exposure to the elements or from general wear and tear. If this occurs, the hex screw should be replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This flange bearing is a genuine MTD part, sold individually. This flange bearing can be used as a replacement part in a lawn mower. The purpose of the flange bearing is to affix to the steering shaft of the lawn mower and allow the inner ring of the bearing to rotate while the outer ring stays stably in place.The flange bearing in a lawn mower might have to be replaced if the fastening component no longer works as usual. This could occur if the flange bearing has been stripped, eroded, warped, dented, cracked, punctured, torn, or otherwise damaged. If this occurs, the flange bearing should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flange bearing is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, Cub Cadet, Murray, Yard Machines, Yard Man, Montgomery Wards, Huskee, Bolens, and MasterCut.

This shoulder screw is a genuine MTD part. It is manufactured as a replacement part for several models of lawn tractors, hi-wheel mowers, lawn tractors, and lawn mowers.Most shoulder screws will last for many years, but this one is made for compatibility with machines made in the 1980s and 1990s. For the machines this old, it is normal for the shoulder screws to become worn.This shoulder screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check whether more than one needs replacement. It is compatible with machines made by White Outdoor, Yard Machines, Ace, Wizard, Lawn Chief, Huskee, Husky, Statesman, Ranch King, Mastercraft, MTD Pro, Montgomery Ward, Cub Cadet, and Bolens.

This replacement part is a hex screw. It is a genuine replacement part made by MTD. Hex screws are able to hold other parts in place and secure them so that everything can operate smoothly. This part is small yet very important to the overall operation of many different machines.A new hex screw might be needed if the user notices that the current ones are damaged or missing. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. It is possible that screws become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This washer is a genuine MTD replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, and lawn mowers. The purpose of a washer is to protect and insulate nuts, bolts, and other types of fasteners, preventing these fasteners from gradually loosening. A washer will have to be replaced in the event that it is lost or misplaced, a common occurrence given its extremely small size and its ability to slide off without calling any attention to its absence. Other reasons to replace a washer could include general wear and tear or visible damage in the form of erosion, bending, or cracking metal as a result of overuse or overexposure. If a washer is subject to any of this kind of damage, it should be replaced immediately to avoid nuts and bolts coming loose and separating the materials that they protect and hold together. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This washer part is compatible with the brands MTD, Yard Machines, Cub Cadet, and Yard Man.

This is a self-tapping screw that can be used on a wide variety of lawn and garden equipment in many applications. A self-tapping screw is used to secure metal, wood, plastic, and brick together. When using a self-tapping screw, there's no need to drill a pilot hole since the screw makes its own hole. The only exception is with metal, which will still need a drilled hole before installation. There are many situations when a screw may need to be replaced. Some screws are damaged or broken, while others can become loose and no longer hold materials together. Screw heads can become stripped, which will also mean they need to be replaced. A visual inspection can often give an indication of whether you should replace a self-tapping screw. This is a genuine OEM hex head screw that can be used on various lawn and garden equipment, including wood chippers, lawn mowers, snowblowers, log splitters, tillers, edgers, and leaf blowers. It's compatible with products by MasterCut, Craftsman, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Troy-Bilt, Montgomery Wards, Murray, Huskee, Yard Machines, MTD, and more. This screw is sold individually.

This part is a replacement steering drag link. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective steering drag link on lawn tractors. The steering drag link is a critical component of the lawn tractor steering system. It works to convert the rotary motion generated by the crank arm to the wheels of the tractor. This enables the user to properly maneuver the equipment. If this part is bent, dented, or damaged, proper steering may be difficult or impossible. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this steering drag link, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this steering drag link is suitable for use on several different models of lawn tractors manufactured by MTD, Yard Machines, Bolens, Ryobi, and Troy-Bilt. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This drag link is a genuine MTD part, sold individually. This drag link can be used as a replacement part in a lawnmower. The purpose of a drag link, also known as a steering arm, in a lawnmower is to affix the steering wheel and the shaft to the front tires of the appliance for ease in steering the lawnmower while in operation.The drag link in a lawnmower might need to be replaced at some point within the typical lifespan of the appliance; this can occur if the lawnmower is difficult to steer in a way that is directly attributable to the drag link, which could be due to damage to the component. Damage can take the form of puncturing, warping, denting, cracking, or eroding, and if the damage precludes the function of the drag link, the drag link should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This drag link is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

The hex lock nut is found on many different types of outdoor lawn equipment, as well as other types of equipment. The lock nut works to secure bolted joints by adding friction to the bolt threads. The nut has flat sides, which can easily be gripped by a wrench to be tightened or loosened as needed. These types of nuts are common, as they provide easy assembly and disassembly of various parts. Buyers may need a new hex lock nut for a range of reasons. The nut that is currently on the equipment could have become damaged or lost while working on the machine. It is vital for all of the nuts to be in place and properly secured on the equipment before use. This is an authentic OEM part. Some of the products that use hex lock nuts include lawn mowers, snowblowers, tillers, edgers, string trimmers, and log splitters. Common equipment brands using these nuts include Craftsman, Toro, Cub Cadet, Yard Machines, and Troy-Bilt.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for lawnmowers. This axle assembly elevates the back of the cutting deck and to maintain the placement of the wheels of the lawnmower.The axle assembly might have to be replaced within the standard lifespan if it can no longer maintain the placement of the lawnmower wheels. This could occur as a result of damage to the axle assembly in the form of puncturing, scraping, tearing, or eroding to the point that the axle assembly is knocked out of place or its attachment to the wheels is severed. If this occurs, the axle assembly should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This replacement part is an axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the wheels are stationed properly on the appliance.A new axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This hex nut is designed for use with select trimmers and mowers. It is a standard hardware part that may have multiple applications depending on the type of unit and model. The nut is typically used to secure engine components or housing elements to provide safe use of the machine. These nuts are durable, but they are small and can become lost during other repairs. The constant exposure to vibrations and use can also cause them to strip or become damaged over time. Either way, a replacement with this genuine hex nut will resolve the issue and get equipment back in working order. This genuine OEM hex nut is manufactured to exact standards and sourced from the manufacturer. It can be used with trimmers and mowers from RYOBI, MTD, Bolens, Troy-Bilt, Yard Machines, Huskee, Yard Man, and Cub Cadet. Check the parts diagram for exact application and location of this nut and note that it may have multiple uses on select models. This hex nut is sold individually, and additional nuts will require the purchase of multiple pieces. In order to replace this nut, a hex socket wrench and driver will be required. Always wear gloves for safety.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This is a ball and joint assembly replacement for use with several types of lawn and garden equipment, including lawn tractors. The ball and joint assembly is an important part of the steering system in the machine. It helps to secure tie rod ends and drag links. If there is damage to the ball and joint assembly, it can cause a range of problems with the steering. This can make it impossible to properly operate the machine. Damage to the assembly could occur for a range of reasons. In some cases, it could simply be years of wear and tear plus corrosion. Other times, it could be damage caused while operating the machine. Issues with the ball and joint assembly should be repaired right away. This is a genuine OEM replacement part that can work for many machines, such as lawn tractors, lawn mowers, and snowblowers. It is compatible with a range of brands including Yard-Man, Troy-Bilt, Yard Machines, Craftsman, Bolens, Murray, Cub Cadet, Toro, and MTD.

This part is a replacement tie rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or dented tie rod in a variety of lawn tractor models. The tie rod is critical to the lawn tractor's steering system as it connects the steering arm to the wheel. If the tie rod is damaged the equipment may not be able to maneuver properly, which can pose danger to the user. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this tie rod, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this tie rod assembly is suitable for use on several different models of lawnmowers manufactured by MTD, Troy-Bilt, Yard Machines, Yard Man, Husky, and Ryobi. This is a genuine part made of high-quality, durable materials and is sold individually.

The Hex Jam Nut is a genuine 4 oz. jam nut. This part is half the height of most standardized hex nuts. Typically used as a locknut, hex jam nuts are used for two general purposes. The first application is that a jam nut can be used in conjunction with a bolt to be tightened against a standard nut. By using the hex nut and the bolt together, the standard nut will lock in place and will not back off. The second application is that jam nuts are used in tight uneven places as a means to level. Further, jam nuts can be used in situations where sufficient space is lacking for a standard nut.The Hex Jam Nut is sold individually. If a hex jam nut is lost through general use, it can be replaced simply with the same OEM part sourced directly from the manufacturer. The part can be replaced and installed with a wrench and should only take a few minutes to replace. This product is suitable for use with chippers, lawnmowers, lawn tractors, log splitters, snowblowers, and vacuums. Sturdy and durable, the product is made from galvanized steel.

This part is a right-hand front axle assembly that is used on lawn tractors. This particular axle is located on the right-hand side at the front of the lawn tractor. An axle is a component to which the lawnmower wheels are fitted. The axle supports the weight of the lawnmower.A new right-hand front axle assembly may be needed if the lawnmower is making a clicking noise when turning, if there is a knocking sound, or if grease can be seen on the inside or on the edge of the tires. The lawnmower operator may also notice excessive vibrations when operating the lawnmower. If this is the case, the axle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This part is a genuine MTD part. It is sold individually. This particular right-hand front axle assembly is compatible with lawn tractors that are manufactured by MTD, Ryobi, Yard Machines, Yard-Man, Troy-Bilt, and Husky.

This part is a right-hand axle assembly that is used on lawn tractors. The axle is the component to which the wheels are fitted. The purpose of an axle is to support the weight of the lawn tractor, keep the drive assembly firmly attached to the lawn tractor, and hold the wheels in their proper places.A new right-handle axle assembly may be needed if the original is cracked, broken, or damaged in any way. If the lawn tractor is not cutting the grass evenly, if the lawn tractor is making squealing noises, or if there are excessive vibrations in the unit, then the axle assembly may be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine MTD part. It is sold individually. This particular right-handle axle assembly is compatible with lawn tractors that are manufactured by MTD, Turf Power, Hechinger, White Outdoor, Lawn Hawk, Mastercraft, Servistar, Lawn General, Yard Machines, ACE, Agway, Ryobi, Cub Cadet, Troy-Bilt, and Husky.

This part is a replacement grease fitting. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current grease fitting is defective or broken, this part can be used as a replacement. It is intended for use with a variety of chipper models.The grease fitting feeds lubricants into the equipment's bearings. This part will require replacement with a genuine OEM part if broken, detached, or rendered ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this grease fitting, the appropriate owner's manual and equipment diagrams should be referred to. This grease fitting is suitable for use on a variety of chipper models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This tubeless air valve attaches to wheels, allowing air into and out of the tires on various lawn equipment. Regularly replacing this part is considered a part of routine maintenance. Make sure that you use appropriate pliers and other tools for easy installation. Be sure to use gloves when replacing these valves and work with caution so as not to damage the sensitive parts. This OEM tubeless air valve can be the perfect fit for compatible wheels on equipment such as lawn mowers, snowblowers, tillers, edgers, log splitters, and wood chippers. It is designed for use with select models from MTD, including Craftsman, Troy-Bilt, Bolens, Remington, Yardman, RYOBI, Husky, Power Pro, and many others. There is a limited parts warranty on this valve, which is made of durable rubber and metal and designed to offer a high-quality replacement. Sold individually.

This genuine OEM replacement part is a flange bearing designed to be used with a wide range of lawn tractors. A bearing is a mechanical part made to restrict movement and prevent other parts from shifting about in the tractor. This is a flange bearing, referring to its particular shape. The bearing slides into place while the flange creates an added layer of protection around the connection. While restricting motion, bearings experience a lot of friction. After a long period, a bearing may eventually begin to wear away and other parts may start to feel loose or pull apart. This can cause more widespread damage in a lawn tractor, such as a broken suspension or disconnected lower deck. The difficulty of this repair will depend largely on where the flange bearing that needs replacing is located. The odds are that any repair will require a socket wrench set, a screwdriver, and a pair of pliers to access any flange bearing. This replacement flange bearing is sourced from its original manufacturer and will fit tractors made by Ryobi, MTD, Bolens, Troy-Bilt, Cub Cadet, Yard Man, and Yard Machines. This part does not include any additional hardware.

This specialty flat washer has multiple applications in engines but is typically used to secure connections and help to distribute the weight and pressure between two components that are connected by a bolt or screw. With regular use, this washer can become worn or get damaged over time. This flat washer can be found in many locations on lawn and garden equipment, so users will need to refer to equipment diagrams and parts manuals for exact applications and part numbers. This replacement washer is a genuine OEM part and can provide an exact fit for compatible models. This genuine replacement flat washer is designed for use with a variety of lawn tractors from RYOBI, BTD, Troy-Bilt, Cub Cadet, Yard Machines, Yard Man, Husky, and Bolens. The washer is made of durable metal and sold as an individual unit. Be sure to check the exact measurements of the needed washer prior to purchase to guarantee an exact fit. This part is typically a simple replacement and will only require a socket set, wrenches, and a screwdriver. Always wear gloves and allow engines to cool before performing repair work or making parts replacements.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This center hex nut is a genuine MTD part, sold individually. This center hex nut can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the center hex nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to provide a fastening component for one or more parts within the internal mechanisms of the appliance.The center hex nut might need to be replaced if the small fastening component is lost, misplaced, or damaged within the typical lifespan of the small engine outdoor appliance in which it has been installed.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This center hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

This authentic OEM replacement part is a steering shaft intended to be used on lawn tractors. A steering shaft connects the steering wheel to the rest of the steering mechanism. As a user rotates the steering wheel, the steering shaft also rotates to move the pinion along the steering rack. The more the steering shaft rotates, the more the pinion travels along the rack, and the more the wheels turn in the direction of the steering wheel. Steering shafts most commonly have to be replaced if the steering mechanism becomes worn out or stripped. When this happens, steering will be more difficult and cause strange clunking sounds. The steering wheel may also feel looser than normal and may not recenter after being turned. Leaving a faulty steering shaft unrepaired can lead to accidents. Replacing the steering shaft means detaching the lower deck of the lawn tractor from the upper frame, then removing the steering wheel, adapter, fuel tank, and old steering shaft. This requires a socket wrench set and can is an intermediate-level repair. This part is compatible with MTD, Yard Machines, Troy-Bilt, Yardman, Husky, and Bolens lawn tractors. It ships individually and is sourced from the original manufacturer.

This oval screw is a genuine MTD part, sold individually. An oval screw can be used as a replacement part for outdoor appliances including humidifiers, lawn mowers, snowblowers, tillers, log splitters, and wood chippers.The oval screw for one of these outdoor appliances might be subject to enough damage that could mandate a complete replacement of the part. Additionally, the oval screw could be lost or misplaced, as it is a small component that might not alert the operator of the appliance to its absence immediately. Refer to the manual for detailed instructions.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This oval screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

A flat washer is used in a variety of applications, such as being placed under bolts or nuts as a means to help distribute the load over a larger area and to help ensure the nuts and bolts do not become loose over time. The washers also help to protect the surface from corrosion and damage. Not having washers could reduce the lifespan of a machine. It is important for buyers to replace washers that may have been lost or become damaged. The washers should be checked for signs of corrosion, cupping, or other damage that would necessitate replacement. Buyers should always make sure they are getting the correct size. The flat washer is an OEM part sold individually. It can be used for a range of different types of outdoor machines and more. Some of the types of machines that typically use these washers include lawn tractors, tillers, lawn mowers, chippers, shredders, and snowblowers. Brands include MTD, Yard Machines, Yard-Man, Troy-Bilt, Poulan, and Ryobi.

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

This is an OEM replacement for the pivot bar end cap, which is designed to fit on select models of outdoor tractors. The pivot bar end cap covers the pivot bar on the machine and provides the steering support for the lawn tractor. This durable metal part is subject to constant vibrations and repetitive motion, which can lead to damage or wear over time. Without a properly functioning end cap, the pivot bar will not seat correctly and the unit will not be able to steer. This unit is compatible with lawn tractors from MTD, Ryobi, Yard Man, Yard Machines, Troy-Bilt, Husky, and Bolens. The part is sold individually and does not include any additional hardware or components. This durable metal part is made of premium materials and provides an exact OEM fit in compatible models. Replacing this part requires a wrench, socket set, and screwdriver. Be sure to allow the engine to cool entirely and work in a well-ventilated area for safety. Disconnect the power from the unit and wear gloves for hand protection, as well.

This axle cap is a genuine MTD part, sold individually. This axle cap can be used as a replacement part for a lawn mower. The purpose of the axle cap is to provide covering and protection for the axle.The axle cap might have to be replaced at some point in the lifespan of the lawn mower if it is compromised or damaged to the point that it cannot protect the axle. If the axle cap is chipped, cracked, punctured, or eroded, the component should be removed and replaced by this genuine OEM replacement part so the axle is not subject to any undue damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle cap is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, Yard-Man, Montgomery Wards, and Huskee.