Tecumseh Engine Fastener

This screw is built specifically to secure the choke bracket on a variety of snowblowers and tillers. Screws can be used in all sorts of situations to hold two components together for protection and security. Over time, the screw can become stripped, corroded, or damaged. When this occurs, the screw will need to be replaced.A visual inspection will determine whether the screw needs to be replaced. First, make sure the equipment is turned off and the spark plug wire has been disconnected. Look at the screw and clean it off to determine whether it has been damaged or broken. Sometimes, the screws can become loose and will need to be replaced to continue securing the choke bracket. The first step is to use a screwdriver or a nut removed to take out the damaged screw. Replace it with a new screw.This is a genuine OEM replacement part that is directly sourced from the manufacturer. The screw is sold as an individual part. It is made to be compatible with snowblowers and tillers manufactured by Lawn-Boy, Toro, Cub Cadet, and Tecumseh.

This is a genuine replacement screw designed for Tecumseh engines installed on Toro lawn mowers. While screws are used for many purposes on the engine and mower body, this screw is usually found holding the starter grille in place over the rewind starter. The grille serves a number of important purposes, including allowing airflow, preventing large debris from binding up the starter, and more. In most cases, screws do not suffer from wear and tear. However, there are many ways they might be damaged. Removing the screw with the wrong tool might round the head, for instance. The screw may also be rusted in place if the mower is left unprotected in the elements. Replacing the grille screen screws is a simple process and requires little more than a wrench or the appropriate socket and ratchet. Simply unscrew it, dispose of it, and install the new screw. This screw is made from metal for better durability and is a genuine OEM replacement part. It is sold individually and works with Toro mowers with Tecumseh engines. It is also compatible with Craftsman, Lawn-Boy, and Cub Cadet mowers.

This is a flywheel key manufactured by Craftsman and also used by Tecumseh for many of their small gasoline powered engines, particularly lawn mowers. A flywheel key is a part that sits between the flywheel and the crankshaft of the engine. When the engine turns over, the flywheel causes the equipment's moving parts to turn, such as the blades of a mower. A flywheel key is designed to sheer off or break without damaging the flywheel should the mower blades hit an obstacle. If the engine will not start, starts but does not have full power, or throws out a lot of engine oil and smoke, the chances are the flywheel key is damaged. If there is a tremendous amount of backlash when the user tries to pull the starting rope, that also is a sign of a damaged flywheel key. When a flywheel key is damaged, it causes the spark plug to fire out of synch with the proper fuel/air mixture coming into the cylinder. Remember when replacing the flywheel key, it is essential to use a replacement part like this one that is a genuine OEM manufacture part. It is identical the original.

This replacement stud is designed for use in select lawn mowers. The carburetor mounting stud is specialty hardware that is used to mount the carburetor on the engine assembly. The stud bolt secures the carburetor, but it is subject to extreme temperatures and ongoing vibrations so it can become worn or even snap over time. Without a stud bolt, the carburetor will not be properly affixed to the rest of the engine, which means it will not be able to run properly. Replacing a faulty stud bolt should be done as soon as possible. This OEM stud bolt is manufactured to exact standards and is compatible with 150+ models from the Tecumseh brand, as well as select mowers from Toro and MTD. The bolt requires pliers and a socket set to replace. Always allow the engine to cool completely and drain the fuel system before performing work on the carburetor or internal engine parts. This stud bolt is made of durable metal and sold as a single unit.

This part is a screw used on outdoor power equipment. A screw is used to fasten components together to secure them in place. A new screw may be needed if the original screw has been lost. These parts are small and can be easy to lose. Another reason that a new screw may be needed is if it is stripped and is no longer holding components securely in place. It is also possible that a screw could become physically broken under high impact situations. In all of these situations, a new screw will be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This screw is compatible with snowblowers and snow throwers that are manufactured by Tecumseh, Toro, Lawn-Boy, and MTD.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

Flywheel keys are a component of lawnmowers and other small machines for use in the lawn and garden. The flywheel key makes sure the flywheel stays in the appropriate position relative to the crankshaft and the piston. If a lawnmower hits a rock or other item in the yard, it can cause damage to the flywheel key and the part may need to be replaced. The first step to determining the issue is inspecting the flywheel key visually. Remove the flywheel and look at the key and the slot on the crankshaft known as the keyway. The soft metal might be damaged and need to be replaced. Look for cracks and breaks in the metal. It should be smooth and clean without burrs. It also should not wobble when the flywheel is attached to the crankshaft. If it needs to be replaced, remove the spark plug lead and bolts holding the shroud to reach the component.This flywheel key is a genuine OEM component sourced directly from the manufacturer. It is available as an individual part. The key is designed for use with lawnmowers and wood chippers made by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.

This durable metal screw is used in various types of lawn and garden equipment. A screw can be used on its own to attached two components together. It can also be used with a nut when there is a pre-drilled, threaded hole for it to go in. If a nut is being used, it should have the same finish and use the same threading as the screw does.This screw is typically used to fasten a fuel tank to a tank mounting bracket on the engine. It can be damaged in many ways and will need to be replaced if it has failed. Extreme temperatures, excess stress, and corrosion can all damage or break the screw. Do a visual inspection of the part to see if it has any wear and tear or has broken. If it has, it can be replaced using a screwdriver.This screw is designed to be used with lawnmowers, snowblowers, tillers, pressure washers, edgers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Toro, Tecumseh, Lawn-Boy, Snapper, Simplicity, and MTD. It is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual screw.

This screw is a genuine Tecumseh replacement part for several different kinds of small engines, including lawn tractors, lawn mowers, snowblowers, woodchippers, and generators. A screw's function is to tightly join parts together through rotation of the screw. This prevents the materials from loosening and unfastening over time. A screw might be misplaced or lost the screw altogether, since it is a small object that can easily fall out of its place and disappear if loosened. Other reasons to replace a screw can include the gradual deterioration, erosion, cracking, or piercing over time; this kind of damage can be attributed to general overuse or exposure to the elements. If a screw is subject to any of this kind of damage, it is best to replace it before using the appliance at hand, as the pieces must continue to be held together by the screw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the brands Tecumseh, Craftsman, Toro, and Briggs and Stratton. This part sold individually.

This is a genuine replacement flywheel nut that comes from the manufacturer Tecumseh. Nuts are used in various applications in a range of different types of machines. This flywheel nut is made from metal and is used to fasten the engine's flywheel to the crankshaft assembly. It helps to ensure that the connection is tight and that it does not start to come loose during operation. Nuts are a commonly lost part when making repairs on a machine or even during routine maintenance. The flywheel nut could also become corroded or otherwise damaged over years of use. If this happens, owners will want to be sure to replace the nut as soon as possible. Replacement for the flywheel nut tends to be fast and simple. This is an authentic OEM flywheel nut that is sold individually. The nut is a common part and can be used on many different machines. These include lawn mowers, snowblowers, generators, log splitter, wood chippers, pressure washers, generators, tillers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

The screw is used on various parts of lawn and garden equipment for various purposes. It is used to help fasten different pieces to one another. The screws ensure the machine is working properly, and it can help to reduce vibrations. The screws in the equipment may need to be replaced for any number of reasons. In some cases, they might have developed issues with the threads and no longer hold properly. They could have become corroded or they could have been lost when working on the engine. When there is an issue with the screw, it should be replaced right away. The authentic replacement screws are sold individually. They can be used with lawn mowers, snowblowers, log splitters, wood chippers, tillers, pressure washers, generators, and other small engines. The compatible brands include Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity. When buying screws, owners need to get the correct size for their needs. It may be a good idea to have several extra screws on hand.