Thermador Range / Cooktop / Oven Parts

This push-button switch controls electrical power or function circuits in compatible Bosch appliances, restoring user input and on/off control when the original switch fails. What it does:

• Opens or closes the appliance's electrical circuit when pressed to enable a given function
• Commonly used where a user-operated control needs a durable, tactile interface
• Resolves symptoms like an unresponsive control panel, intermittent operation, or functions that won't toggle on
• Replaces a worn or non-clicking switch to restore reliable button response

• One replacement push-button switch

• Disconnect power to the appliance before servicing to prevent shock
• Verify correct terminal connections and orientation before final assembly
• Use basic hand tools; avoid forcing connectors to prevent damage

A replacement spring hinge that helps support and counterbalance the appliance door for smooth opening and closing and proper alignment. Restores reliable door movement and reduces drop or slamming when the original spring is worn or broken. What it does:

• Provides counterbalance tension to help hold the door open and control closing motion
• Restores proper door alignment and prevents uneven closing or gaps
• Reduces sudden drops, slamming, or heavy-feeling doors caused by a weak or broken spring
• Works as the mechanical tension element within the hinge assembly to maintain normal door operation

• One spring hinge (single counterbalance spring)

• Install with power disconnected and door supported to prevent dropping or injury
• May require partial door removal or hinge access depending on appliance design
• Compare the new spring to the old part for correct orientation before installing
• If other hinge components show wear or damage, replace them at the same time for best performance

This mounting bracket secures internal components to the appliance frame to restore proper alignment and reduce movement. It's a simple replacement that helps eliminate rattles and keeps parts firmly in place. What it does:

• Provides a secure anchor point for internal parts to stop shifting during operation
• Prevents rattling, squeaking, or vibration caused by loose components
• Helps restore proper alignment when panels or assemblies sag or sit unevenly
• Replaces cracked or bent brackets that can cause part wear or misfit

• One mounting bracket

• Disconnect power and water before starting any repair
• Access may require removing panels or trim to reach the bracket location
• Use common hand tools (screwdriver, nut driver) and retain hardware for reuse
• Inspect surrounding clips and fasteners and replace any that are damaged for a secure fit

This radiant cooktop element replaces a failed dual-size burner to restore proper heating on compatible glass-ceramic ranges. It provides the inner and outer cooking zones in one dual-ring element for flexible cookware sizing. What it does:

• Heats cookware using the inner or outer cooking ring for small or large pots and pans
• Restores normal cooking when a burner won't heat or heats only on one ring
• Replaces cracked, visibly damaged, or non-responsive radiant elements
• Helps eliminate uneven heating or intermittent power to the cooktop zone

• One radiant cooktop element (dual-size 230/140 mm)

• Disconnect power at the breaker before servicing the cooktop to avoid shock
• Handle the glass-ceramic surface and element carefully to prevent cracking
• After installation, test the burner on low and high settings to confirm operation

This lava rock basket holds and secures lava rocks used with compatible gas burner assemblies to support even heat distribution and protect the burner area. It replaces a worn, broken, or missing basket for safe operation. What it does:

• Holds lava rocks in place so they heat evenly for consistent burner performance
• Protects the burner tray from direct contact with lava rock and debris
• Helps prevent lava rocks from shifting or falling into the burner area
• Addresses symptoms such as loose or missing rock support, shifting lava rock, or unstable burner arrangement

• One lava rock basket assembly

• Turn off the gas supply and power to the appliance before servicing
• Use basic hand tools; verify correct fit and orientation before finalizing installation
• Dispose of damaged lava rocks and worn parts responsibly

This grill grate provides a stable, even cooking surface for compatible Bosch grills, restoring proper support and heat contact for pans and food. It replaces worn, bent, or missing grates to improve cooking consistency. What it does:

• Serves as the primary cooking surface, supporting cookware and food above the burner or heat source.
• Restores proper clearance and airflow for even heating when original grate is warped or damaged.
• Keeps food elevated and stable to prevent tipping or contact with burners.
• Foot provides extra stability and corrects alignment within the grill frame.

• One grill grate with attached foot

• Ensure the appliance is completely cool and gas/electric supply is turned off before handling.
• Typically installs as a drop-in replacement; align grate and foot with existing supports and seating points.
• Inspect surrounding seals and supports; replace any damaged mounting hardware for secure fit.
• Clean with non-abrasive cleaners; avoid harsh scrubbing that could remove coatings or finish.

This blue spark electrode wire connects the oven/range spark electrode to the ignition module so burners or the oven spark reliably. Replacing a damaged or frayed wire restores proper ignition and reduces intermittent or no-spark problems. What it does

• Carries the high-voltage spark from the ignition module to the electrode so the gas ignites.
• Commonly fixes symptoms like burners or oven not sparking, intermittent ignition, or visible wire damage.
• Helps prevent arcing and erratic ignition when the original wire is cracked, burnt, or corroded.
• Matches the OEM shape/color for proper routing and fit in compatible models.

• One blue spark electrode wire (single wire as shown)

• Disconnect power and shut off gas supply before starting any work; follow all safety precautions.
• Handle porcelain/ceramic electrode tips and insulation carefully to avoid damage.
• Route the wire along the original path and secure any retainers; avoid contact with hot surfaces.

This tubing assembly routes water inside the refrigerator to the dispenser/ice system, restoring a sealed water path and reliable flow. Use it to replace cracked, kinked, or leaking tubing for better water delivery. What it does:

• Carries water from the inlet to the dispenser/ice components to enable ice and water dispensing
• Stops leaks and seepage caused by cracked or damaged tubing
• Restores proper water routing when bends or kinks restrict flow

• Tubing assembly

• Turn off the refrigerator and shut off the water supply before starting work
• Drain any remaining water from lines and have a towel/container ready for spills
• Inspect connections and use new fittings or seals if the old ones are damaged

This griddle cover handle replaces a cracked, loose, or missing handle so you can safely lift and lower the griddle cover. It restores a secure grip and the cover's intended ease of use. What it does:

• Provides a stable grip for lifting and lowering the griddle cover
• Replaces broken, cracked, or worn handle that won't stay secure
• Helps prevent accidental drops or contact with hot surfaces while handling the cover
• Matches the original appearance and mounting location for a clean repair

• Turn off and disconnect power to the appliance before starting any work.
• Allow the griddle and surrounding surfaces to cool completely to avoid burns.
• Use basic hand tools; handle attaches at the cover's designated mounting points—do not force or modify the cover.
• Replace with OEM-specified fasteners.

This is a replacement nut used to secure internal appliance components. It restores proper fastening so assemblies stay tight and reduces noise or movement caused by loose hardware. What it does:

• Secures brackets, trim or internal components to prevent parts from shifting
• Stops rattling or vibration caused by a missing or loose nut
• Restores proper fastening after maintenance or repair
• Helps maintain correct alignment of the secured component

• Disconnect power and water before accessing internal parts
• Use appropriate hand tools and a firm grip; avoid power tools that can over-torque
• Do not overtighten — snug until secure to avoid stripping threads
• Replace any corroded or damaged mating hardware for a lasting repair

This convection heating element replaces the oven's rear/top convection heater to restore even heat circulation and consistent baking results. Designed to match OEM fit and function for compatible Bosch ranges and ovens. What it does:

• Heats oven cavity to enable convection cooking and improved heat distribution
• Restores proper airflow and browning when the original convection element is burnt out or intermittent
• Helps resolve symptoms like uneven cooking, longer cook times, or visible element damage
• Works with the oven's convection fan to maintain set temperatures during bake/convection cycles

• Disconnect power at the breaker before attempting service to avoid shock hazard
• Handle element carefully; avoid bending terminals or damaging insulation
• Basic disassembly of the oven back/upper panel may be required

This grease catch tray collects drips and overflow from the grill/broiler area to help keep the oven or grill cavity cleaner and reduce grease buildup. It fits into the grill assembly to channel grease away from heating elements. What it does:

• Catches grease and drippings from the grill or broiler surface to protect the cavity floor
• Helps reduce smoke and flare-ups caused by grease contacting hot surfaces
• Keeps grease contained for easier cleanup and routine maintenance
• Restores proper grease control when the original tray is damaged, warped, or missing

• One grease catch tray

• Allow the appliance to cool and disconnect power before servicing
• Remove oven racks or grill components as needed to access the tray slot
• Slide the tray into place until it seats securely; no special tools typically required
• Dispose of heavy grease safely and clean the tray regularly per owner manual guidance

This replacement griddle can is the stamped inner pan that supports the griddle surface and collects/drains cooking grease. It restores a secure, properly shaped cooking surface so the griddle heats and drains as designed. What it does

• Replaces a dented, warped or corroded griddle pan that can interfere with even cooking
• Provides the molded surface and drainage channels that direct grease away from heating elements
• Helps reduce grease pooling that can cause excess smoke or flare-ups
• Restores proper fit and alignment of the griddle assembly in the cooktop cavity

• One griddle can (inner griddle pan)

• Disconnect power to the appliance and allow all surfaces to fully cool before beginning work
• Use gloves to avoid sharp edges on the metal pan and protect hands from grease
• Remove the griddle surface and any fasteners per the appliance service instructions; reinstall using OEM hardware
• Follow the appliance manufacturer's service manual for torque, alignment and testing procedures