Parts for White Outdoor 190-830-190 / 1987: Thrower Assembly Parts

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, string trimmers, chainsaws, edgers, log splitters, and wood chippers. The purpose of the flat washer for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance so that friction is reduced and components are spaced apart from one another.The flat washer is a small component that can be easily misplaced or lost within the lifespan of a small engine outdoor appliance; additionally, the flat washer can be subject to stripping away and wearing out over time from general use. If this occurs, the flat washer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, string trimmers, chainsaws, edgers, log splitters, and wood chippers. The purpose of the flat washer for one of these small engine outdoor appliances is to serve as a fastening component within the internal mechanisms of the appliance so that friction is reduced and components are spaced apart from one another.The flat washer is a small component that can be easily misplaced or lost within the lifespan of a small engine outdoor appliance; additionally, the flat washer can be subject to stripping away and wearing out over time from general use. If this occurs, the flat washer should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener that secures together different equipment components. Push nuts will need to be replaced if worn, broken, lost, or otherwise ineffective. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this push nut, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This push nut can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This spring washer has a conical shape with an open center. It has a shape like a traditional washer but is smaller than a typical coiled spring. These washers can handle a larger load than a coiled spring and are used in lawn and garden equipment to cushion heavy loads. Over time, these washers can experience wear and tear which will lead to damage or breakage. When this occurs, the spring washer will need to be replaced.Visually inspect the spring washer for damage like scratches, breaks, and dents. If these occur or the washer is warped, it needs to be replaced. The process involves removing the nut or screw above the washer with a screwdriver or other tool. After accessing the spring washer, it can be removed and a replacement part can be added to the equipment. Reassemble the parts and the equipment should work again.This is a genuine OEM spring washer replacement part that is sold individually. It's sourced directly from the manufacturer. It is compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, chainsaws, string trimmers, and edgers by Craftsman, MasterCut, Toro, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Husky, Montgomery Wards, Murray, Huskee, Yard Machines, and MTD.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a way to help ensure a tight connection when used with bolts or screws. They will also help to distribute the pressure of the connection and reduce the risk of corrosion. Washers will also provide some protection from damage during installation. Washers could need to be replaced for any number of reasons. In some cases, they might have become corroded or worn down over time. This could mean they no longer provide a solid and secure connection. Other times, the washer could become lost while working on the machine. Owners should always be sure that they replace any lost or damaged washers right away. Not using washers can reduce the lifespan of the machine. This is a genuine OEM bell washer that is sold individually. It is typically used in lawn mowers, snowblowers, tillers, leaf blowers, string trimmers, log splitters, wood chippers, edgers, and chainsaws. It is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut brands.

This is a genuine hex nut replacement designed for select MTD outdoor lawn and garden equipment. The hex nut is a piece of standard hardware that may have several applications on different units. It is generally used to secure other hardware, handles, or connections. It may be subject to vibrations and constant pressure, which can result in wear over time. These nuts may also get lost during other repairs or if they come loose. In most cases, the unit will be inoperable until the nut is replaced. This genuine OEM replacement hex nut is designed for use in MTD lawn equipment and engines, along with machines from RYOBI, Troy-Bilt, Husky, Yard-Man, Cub Cadet, Bolens, and Yard Machines. The metal nut will require a wrench to replace but should only take a matter of minutes. This is a left-hand threaded nut that is sold as an individual part. Be sure to allow equipment to cool and always wear gloves when performing repairs. The location and function of this nut will vary depending on the unit in question, but it can be used with chippers, lawn tractors, trimmers, edgers, snow throwers, and cultivators.

This is a genuine hex nut replacement designed for select MTD outdoor lawn and garden equipment. The hex nut is a piece of standard hardware that may have several applications on different units. It is generally used to secure other hardware, handles, or connections. It may be subject to vibrations and constant pressure, which can result in wear over time. These nuts may also get lost during other repairs or if they come loose. In most cases, the unit will be inoperable until the nut is replaced. This genuine OEM replacement hex nut is designed for use in MTD lawn equipment and engines, along with machines from RYOBI, Troy-Bilt, Husky, Yard-Man, Cub Cadet, Bolens, and Yard Machines. The metal nut will require a wrench to replace but should only take a matter of minutes. This is a left-hand threaded nut that is sold as an individual part. Be sure to allow equipment to cool and always wear gloves when performing repairs. The location and function of this nut will vary depending on the unit in question, but it can be used with chippers, lawn tractors, trimmers, edgers, snow throwers, and cultivators.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part for lawn mowers, lawn tractors, and snowblowers. The purpose of a flat washer for one of these appliances is to serve as part of a fastening mechanism so components like screws, bolts, nuts, and spacers can be protected from friction and heat generated by the appliance.A flat washer is a small component that can be easily lost or misplaced while the device is in operation. If the washer is found to be lost at any point, it should be replaced. Flat washers can also become warped over time, and if this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Yard Man, and MasterCut.

This is a replacement shear bolt that is used on snowblowers. The shear bolt has an important role and an interesting one—it is supposed to break, or shear off, when the unit malfunctions. Therefore, it may be necessary to replace this part sooner than expected if something else happens to the machine. When the already-weakened bolt is connected to the shaft and the impeller, it ensures that the machine can rotate and collect the snow. If the impeller or auger experiences an impact or other problem, the shear bolt will break, causing the unit to stop operating for the sake of safety. There are also instances where the shear bolt could become damaged without being engaged. Either will require a replacement and this OEM part will provide an exact fit for compatible models. The snowblower shear bolt is sold individually and is compatible with select models from MTD, Cub Cadet, Yard Machines, and Yard Man. It is manufactured to exact standards for compatible units and will provide an ideal replacement so that the unit can be used safely once again. Be sure to disconnect the power to the unit and wear gloves for hand safety. A wrench or socket will be needed to replace this bolt.

This part is a replacement thrust bearing. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a broken or defective thrust bearing in outdoor power equipment.Bearings help to reduce friction created by moving parts as well as ensure the equipment functions smoothly and without excessive vibration. Bearings can become worn, corroded, jammed, or otherwise defective, requiring replacement. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this thrust bearing, the appropriate owner's manual and equipment diagrams should be referred to. This thrust bearing is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment models that have been manufactured by MTD, Craftsman, and other brands.

This replacement part is a gear. This is a genuine replacement part made by MTD. This part is made with ridges that are able to connect to other parts so that they can turn or spin during use. This transfers energy and force to different pieces in the machine to ensure that the everything is working properly. A new gear might be needed if the current one is struggling to stay attached to other parts. This can be due to the ridges become stripped over time. If this is the case, the gear should be replaced. gears experience large amounts of friction and will need to be replaced after a while. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This sleeve is a genuine MTD part. It is a replacement part for snow blowers and snow throwers primarily, but is also sometimes utilized on other small engine lawn equipment.Sleeve bearings are very important as they help with linear movements between two parts. They do this by absorbing the friction created by the two other parts, which reduces noise and vibrations. It is normal for them to wear out over time. Increased noise is one way to recognize this problem.This sleeve bearing is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Some machines require more than one sleeve bearing. It is compatible with equipment made by White Outdoor, Craftsman, Mastercraft, Columbia, MTD, Troy-Bilt, Cub Cadet, Yard Machines, Yard-Man, and others.

There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.

This oil seal is a genuine MTD part. It is designed as a replacement part for snowblowers. Oil seals do exactly what their name implies: they prevent oil from leaking. They are located on the input and output shafts of the crankshaft of the snowblower.It is not abnormal for oil seals to become worn over time, especially under heavy use. Users may notice oil leaking, especially while using the snowblower, if this is the case. Leaking oil can cause a mess (which can be dangerous) or may seriously damage the engine. Replacing an oil seal is a relatively simple repair, though some disassembly of the engine may be required. The oil seal itself is very small and round.This oil seal is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. There is more than one oil seal on most snowblowers, so check them all before ordering. It is designed for compatibility with machines made by Craftsman, MasterCraft, White Outdoor, Columbia, Yard-Man, Cub Cadet, MTD, Yard Machines, and Troy-Bilt.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This shave plate is a genuine MTD part, sold individually. This shave plate can be used as a replacement part in a snowblower. The purpose of the shave plate, also known as the scraper plate, is to scrape up densely packed snow on the ground while the appliance is in operation so that snow can be cleared out of the path of the operator.The shave plate in a snowblower might be damaged to the point that it can no longer serve its vital function of unclogging packed snow from the path of the operator. The shave plate could be warped, dented, cracked, punctured, or eroded to the point of reduced functionality, and if this occurs, the shave plate should be removed and replaced by this genuine OEM replacement part in accordance with the proper instructions sourced from a relevant appliance manual or handbook.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shave plate is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This carriage bolt is a fastener with a flat tip and a round head with threading along the shank. Also known as coach bolts and plow bolts, the item can be used with many types of lawn and garden equipment. This is a 5/16 carriage bolt that resists turning after the bolt has been tightened. Wear and tear or impact can cause damage to a carriage bolt and lead to the need to replace them.Removing a carriage bolt requires twisting the nut loose from the end of the bolt and then hitting the nut with a hammer. This will begin to move the shoulder out of the lawn equipment. Continue the process until the bolt is loose enough to remove. Installing a new carriage bolt simply requires sliding the bolt into the hole, adding the nut, and tightening things up.This carriage bolt is designed for use with Craftsman, MasterCut, Toro, Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines lawn and garden equipment. It can be used with lawnmowers, chainsaws, snowblowers, edgers, and tillers. This is a genuine OEM product sourced directly from the manufacturer as an individual component.

This carriage bolt is a self-locking fastener made for use in round or square holes to attach metal to metal in outdoor equipment. These bolts provide an added safety feature because they can only be removed from one side. Carriage bolts can carry a large amount of weight, which makes them ideal for use in outdoor yard equipment. Carriage bolts may be used to attach a lawn mower's arm to the side support and other similar applications. If the bolt needs to be replaced, removal and installation are simple. Use a wrench to loosen the nut holding the washer and bolt in place. Once the nut is loose, the bolt can be unthreaded by hand and pulled out of the hole. To install, push the bolt back through the hole. If the fit is too tight to install by hand, use a hammer to tap it in place. Reinstall the washer and nut and tighten with a wrench.This carriage bolt is designed for use in lawnmowers, snowblowers, and lawn tractors manufactured by Craftsman, Bolens, Yard Machines, Yard-Man, and MTD. This is a genuine OEM product that comes directly from the manufacturer. Note: It does not come with a nut or washer.

This lock washer is used frequently for a number of applications on power yard equipment. The size, 5/16, is the default for many small engine housing and manifold applications. Lock washers are used with machined bolts to fasten engine blocks to the housing of the equipment being used. The compressed washer is able to handle the constant vibration of the small gasoline engine without losing the seal between the screw or bolt and the housing. Typically these lock washers only need to be replaced when they are misplaced during repairs or when the screws that attach them have to be chiseled or cut away, meaning the washers are destroyed as well. These OEM certified replacement washers have been manufactured to the same specifications as the originals they are replacing. In addition to lawn mowers, lock washers of this type and size are frequently used on blowers, lawn tractors, cultivators, snowblowers, and trimmers. Brands compatible with this type of washer are Murray, Husky, Poulan, Bolens, Yard-Man, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and Ryobi.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This is a self-tapping screw that can be used on a wide variety of lawn and garden equipment in many applications. A self-tapping screw is used to secure metal, wood, plastic, and brick together. When using a self-tapping screw, there's no need to drill a pilot hole since the screw makes its own hole. The only exception is with metal, which will still need a drilled hole before installation. There are many situations when a screw may need to be replaced. Some screws are damaged or broken, while others can become loose and no longer hold materials together. Screw heads can become stripped, which will also mean they need to be replaced. A visual inspection can often give an indication of whether you should replace a self-tapping screw. This is a genuine OEM hex head screw that can be used on various lawn and garden equipment, including wood chippers, lawn mowers, snowblowers, log splitters, tillers, edgers, and leaf blowers. It's compatible with products by MasterCut, Craftsman, Turf King, Cub Cadet, Yard-Man, Ryobi, Bolens, Troy-Bilt, Montgomery Wards, Murray, Huskee, Yard Machines, MTD, and more. This screw is sold individually.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This lower discharge chute is a genuine MTD part, sold individually. This lower discharge chute can be used as a replacement part in a snowblower. The purpose of the lower discharge chute is to allow for the dispensing and disposal of snow while the appliance is being used by the operator across a variety of snow-packed surfaces.The lower discharge chute could be punctured, ripped, torn, dented, or otherwise damaged, and if this occurs, the lower discharge chute should be removed and replaced by this genuine OEM replacement part in accordance with a properly sourced set of instructions. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This lower discharge chute is compatible with the following outdoor appliance brands: MTD.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This center hex nut is a genuine MTD part, sold individually. This center hex nut can be used as a replacement part in lawn mowers, snowblowers, tillers, leaf blowers, edgers, log splitters, and wood chippers. The purpose of the center hex nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to provide a fastening component for one or more parts within the internal mechanisms of the appliance.The center hex nut might need to be replaced if the small fastening component is lost, misplaced, or damaged within the typical lifespan of the small engine outdoor appliance in which it has been installed.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This center hex nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, Huskee, Montgomery Wards, Yard Man, and MasterCut.

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

This bell washer is a genuine MTD part, sold individually. This bell washer can be used as a replacement part for a lawn tractor, chipper shredder, tiller, or lawnmower. This bell washer adds spacing on a shaft in the tool.If the user of the appliance notices that a washer is missing, it should be replaced. General wear and tear is very normal for outdoor appliances, and if it occurs, the washer should be removed and replaced with this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This bell washer is compatible with the following outdoor appliance brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

This upper discharge chute is a genuine MTD part, sold individually. This upper discharge chute can be used as a replacement part in a snowblower or an edger. The purpose of the upper discharge chute is to provide a channel through which the snow or greenery can be gathered and then dispelled by the equipment. The upper discharge chute in a snowblower or an edger might need to be replaced at some point within the typical lifespan of the appliance. This could occur if the upper discharge chute is punctured dented, cracked, eroded, or warped. If this occurs, the upper discharge chute should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This upper discharge chute is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This carriage bolt is a fastener with a flat tip and a round head with threading along the shank. Also known as coach bolts and plow bolts, the item can be used with many types of lawn and garden equipment. This is a 5/16 carriage bolt that resists turning after the bolt has been tightened. Wear and tear or impact can cause damage to a carriage bolt and lead to the need to replace them.Removing a carriage bolt requires twisting the nut loose from the end of the bolt and then hitting the nut with a hammer. This will begin to move the shoulder out of the lawn equipment. Continue the process until the bolt is loose enough to remove. Installing a new carriage bolt simply requires sliding the bolt into the hole, adding the nut, and tightening things up.This carriage bolt is designed for use with Craftsman, MasterCut, Toro, Yard-Man, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines lawn and garden equipment. It can be used with lawnmowers, chainsaws, snowblowers, edgers, and tillers. This is a genuine OEM product sourced directly from the manufacturer as an individual component.

This carriage bolt is a self-locking fastener made for use in round or square holes to attach metal to metal in outdoor equipment. These bolts provide an added safety feature because they can only be removed from one side. Carriage bolts can carry a large amount of weight, which makes them ideal for use in outdoor yard equipment. Carriage bolts may be used to attach a lawn mower's arm to the side support and other similar applications. If the bolt needs to be replaced, removal and installation are simple. Use a wrench to loosen the nut holding the washer and bolt in place. Once the nut is loose, the bolt can be unthreaded by hand and pulled out of the hole. To install, push the bolt back through the hole. If the fit is too tight to install by hand, use a hammer to tap it in place. Reinstall the washer and nut and tighten with a wrench.This carriage bolt is designed for use in lawnmowers, snowblowers, and lawn tractors manufactured by Craftsman, Bolens, Yard Machines, Yard-Man, and MTD. This is a genuine OEM product that comes directly from the manufacturer. Note: It does not come with a nut or washer.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, stripped, or misplaced screw in a variety of small engine outdoor power equipment models. This screw is a standard piece of hardware that has multiple different uses depending on the equipment in question. In general, screws are used to hold together parts the equipment securely. A genuine OEM screw should be used in order to ensure good quality and a proper fit. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this screw is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Troy-Bilt, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.