Parts for Maytag MEDP576KW1: Top And Console Parts

The Knob is an OEM part for Whirlpool dryers. This knob ensures you can accurately select and control the various drying cycles and settings offered by your appliance. Crafted with precision, it matches the aesthetics and functionality of Whirlpool dryers, providing a comfortable grip and smooth operation for the best drying experience.

Over time, knobs can become worn or damaged due to frequent use, accidental impacts, or exposure to high temperatures, which can make them difficult to operate or read.

Symptoms of a bad knob on your dryer include:

• Difficulty in selecting or changing drying cycles
• The knob feeling loose or failing to "click" into place
• Visible cracks, breaks, or wear on the knob
• The dryer not starting or responding to knob adjustments

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer is an OEM part for Whirlpool dryers. This timer is a control mechanism that allows you to set the drying time for various fabrics and load sizes. It works by regulating the duration of the drying cycle to ensure clothes are dried efficiently without overuse of energy or excessive wear on fabrics.  

Causes of a bad dryer timer can vary from electrical problems within the timer mechanism, such as short circuits or burnt contacts, to mechanical failures like stripped gears. 

Symptoms of a bad timer:

• The dryer not starting or failing to stop at the end of a cycle 
• Clothes remaining damp or overly dry 
• The dryer operating only at a specific setting 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This rotary temperature switch controls the heat selection for a dryer, restoring proper temperature control and cycle performance. Replacing a faulty switch helps the dryer reach and maintain the selected heat setting for safer, more consistent drying. What it does:

• Selects the dryer's temperature or heat level during cycles
• Routes power to the heating circuit based on the chosen setting
• Helps prevent overheating when operating correctly
• Commonly replaced when the dryer won't heat, heats incorrectly, or temperature settings do not change heat output

• Disconnect power before servicing to avoid electric shock.
• Access typically requires removing the dryer console or control panel; handle wiring and connectors carefully.
• Verify correct wiring and switch orientation before reassembly.

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

• Produces audible tones for cycle end, timers and other appliance notifications
• Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
• Helps you hear and identify completed cycles and timed alerts
• Small, mountable unit that fits behind the control panel and connects to the control board

• One adjustable buzzer kit

• Disconnect power before servicing to avoid shock risk
• Access may require removing the control panel; keep fasteners organized for reassembly
• Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
• Test buzzer function with power restored before fully reassembling

This mounting bracket secures appliance components in place to restore proper alignment and stability. It's a simple replacement that helps stop rattling and prevents loose panels or assemblies from shifting during use. What it does:

• Provides a secure attachment point for panels, trim, or assemblies
• Restores proper alignment to reduce vibration, noise, and movement
• Helps prevent gaps or sagging that can affect operation or appearance
• Works as a direct-fit replacement when the original bracket is bent, broken, or missing

• Turn off power to the appliance and disconnect from the power source before starting work
• Use appropriate tools and hardware; replace damaged fasteners with exact-match screws

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part is a moisture sensor control board that is used on dryer units. This component monitors the moisture levels within the dryer and adjusts the dry time during the automatic drying cycle. A new moisture sensor control board will be needed if the time is not advancing in the automatic drying cycle, even if it does advance in the timed dry cycle. Another sign is if the dryer continues to run after the clothing inside is dry. Unplug the dryer from its power source prior to replacing this component. The person performing this task may wish to wear work gloves to protect their hands.The moisture sensor control board is compatible with dryers that are manufactured by Kenmore, KitchenAid, Kenmore Elite, Whirlpool, Amana, Crosley, Maytag, Inglis, Sears Canada, Roper, and Sears. This part is sold individually and it is a genuine OEM replacement part that comes straight from the manufacturer.

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

This terminal cover protects and conceals the appliance's electrical wire terminals for safer handling and cleaner internal appearance. It helps reduce accidental contact with live connections and keeps wiring organized. What it does:

• Covers exposed wire terminals to help prevent accidental contact and shorting
• Keeps wiring routed and held in place for improved serviceability
• Protects terminals from dust and debris that can affect connections
• Supports safer access during diagnostics and repairs

• One terminal cover, as shown

• Disconnect power to the appliance before attempting any service
• Remove outer panels as needed to access the terminal area; use manufacturer service guide for panel removal steps
• Align cover over the terminal block and secure per factory mounting points; do not force or modify
• If terminals or wiring appear damaged or corroded, replace or repair those components before reinstalling the cover

This replacement control knob restores grip and user control for stove or appliance front-panel controls so you can set temperature or settings accurately. It replaces a worn, cracked, or missing dial to make operation smooth and predictable. What it does:

• Fits onto a control shaft to select temperature or function by turning the dial
• Replaces a cracked, stripped, or broken knob that won't stay on the shaft
• Restores tactile grip for precise adjustments and safer operation
• Commonly used when the existing knob is loose, missing, or difficult to turn

• Slide the knob onto the control shaft until it seats; no special tools usually required
• Disconnect power to the appliance before accessing internal components or if removing nearby panels

This wire harness connects key electrical components to the appliance control system, restoring reliable signal and power routing so controls and functions operate correctly. It's a direct-replacement harness used where factory wiring is damaged or failing. What it does

• Routes power and control signals between the control board and major components for proper operation
• Replaces damaged, frayed or corroded wiring that can cause intermittent or total loss of function
• Commonly used when the appliance won't start, control lights are unresponsive, or specific features fail
• Maintains correct connector fit and secure connections to prevent shorts and poor contacts

• One wire harness

• Disconnect power (unplug or switch off breaker) before beginning any work
• Document or photograph connector locations before removal to ensure correct reassembly
• Firmly seat each connector and secure harness routing with existing clips or ties; avoid pinching or sharp edges
• If wiring shows heat damage or corrosion at terminals, replace the harness rather than attempting repairs

The Start Switch is an OEM part for Whirlpool dryers. This part initiates the drying cycle when you press the start button on the control panel. This switch sends a signal to the dryer to begin operation, ensuring your clothes drying process starts smoothly.

Causes of a bad start switch can include repeated use over time leading to wear and tear, electrical issues such as short circuits or power surges, and physical damage due to mishandling or impact. 

Symptoms of a bad start switch include:

• The dryer not starting when the button is pressed
• The dryer stopping unexpectedly during a cycle
• No response or sound when pressing the start button
• Intermittent operation or the need to press the button multiple times

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

10 - 16 x 1/2