Parts for Lg WT1701CV: Top Cover Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Replace a cracked or loose washer lid with this lid assembly for LG top-load models. It restores a secure close so the safety lock can engage, allowing cycles to start and helping keep water and debris contained.

• Covers the tub opening and interfaces with the lid lock so wash and spin cycles can run
• Helps contain splashes and prevents foreign objects from entering the tub
• Provides a stable, easy-to-open top for loading and unloading
• Common symptoms: cracked or broken lid, difficulty closing, misalignment with the lock/striker, or lid-related error messages

• Unplug the washer and turn off water; wait for all moving parts to stop
• Support the lid; remove hinge screws/fasteners from the rear/top panel
• Lift off the old lid, set the new assembly in place, and secure evenly
• Confirm proper alignment and engage the lid lock with a short test cycle

This cap screw is a factory fastener that secures appliance components. Replace a stripped, corroded, or missing screw to restore a tight, rattle-free fit and proper alignment of brackets, panels, and internal assemblies.

• Secures panels, brackets, or assemblies to the chassis or housing
• Maintains alignment to reduce vibration and rattling noise
• Replaces hardware with worn threads, corrosion, or a damaged head
• Common signs: loose/moving parts, buzzing or rattle, and inability to tighten

• Disconnect power (and water, if applicable) before service
• Match length and head style to the original; replace one fastener at a time to preserve alignment
• Start threads by hand to avoid cross-threading; use the correct driver; tighten snugly—do not overtighten
• If the receiving threads are stripped, repair or replace the mating component before final assembly

This is a customized screw used to secure appliance panels and components for a proper fit and safe operation. It replaces lost or damaged fasteners to restore stability and reduce rattling or movement. What it does:

• Secures panels, trim pieces, brackets, or internal components
• Restores proper alignment and prevents rattling or vibration
• Replaces missing or stripped fasteners that cause loose parts
• Helps maintain safe, reliable operation by keeping components fixed

• Disconnect power before servicing any appliance to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or plastic parts
• Keep removed fasteners organized to ensure correct reassembly

This main PCB power control board assembly manages power distribution and electronic control functions for the appliance, helping restore normal operation when the original control board fails. What it does:

• Routes power to motors, valves, heaters and other major components under electronic control
• Interprets user inputs and runs programmed cycles or functions
• Can stop operation or produce error codes when a circuit or component fails
• Common symptoms include no power or display, unresponsive controls, intermittent operation, or recurring error codes

• One main PCB power control board assembly

• Disconnect power and water supply before servicing to avoid shock or injury
• Handle the board by its edges; avoid touching components or connector pins to prevent damage from static
• Transfer any brackets, harnesses or sensors exactly as removed and ensure all connectors seat fully
• If errors persist after replacement, verify wiring, sensors and fuses before assuming board fault.

This display power control board assembly restores the appliance's front display and touch controls so you can see status and select cycles. It replaces a failed display PCB to recover normal control-panel operation and indicators. What it does:

• Powers and drives the control-panel display so icons, lights, and text are visible
• Interfaces touch/selector inputs to the main control system for user commands
• Can resolve symptoms like a blank or flickering display, unresponsive touch buttons, or missing status indicators
• Works as the dedicated display/control interface—does not include main control board functions

• One display power control board assembly (single PCB unit)

• Disconnect power before servicing; risk of shock if powered during replacement
• Handle the board by its edges and avoid static discharge (use a grounded wrist strap if available)
• Verify connector alignment and seating before restoring power; confirm operation after installation

Top cover replaces a damaged or worn cabinet top to restore the appliance's appearance and protect internal components from dust and moisture. It's a direct-fit exterior panel used where the cabinet top is cracked, dented, or warped. What it does:

• Covers and protects internal components from debris, moisture, and everyday wear
• Restores the appliance's cosmetic appearance by replacing a scratched or dented top
• Eliminates rattling or movement caused by a loose or damaged top panel
• Provides a secure surface for control panels, hinges, and trim to mount to

• Disconnect power before servicing; work on a cool, dry surface
• Remove any trim, control panel, or hinges that block access per your model's service instructions
• Lift off the old top and align the replacement; secure with the original fasteners

This switch assembly is the microwave's door interlock module. It mounts to the latch board and contains the switches that confirm the door is closed, restoring consistent start/stop operation when worn or sticking switches cause intermittent "door" errors.

• Houses and positions the interlock micro-switches on the latch board
• Signals the control that the door is securely closed so the unit can run
• Common fixes for: won't start, stops when the door is jostled, "door" error messages, or runs but doesn't heat
• Helps correct intermittent operation caused by fatigued or misaligned switches

• Disconnect power before servicing; microwaves retain dangerous high voltage
• Remove the upper grille and control panel to access the latch area per your model
• Note wire locations and switch orientation; move connectors one at a time to the new assembly
• After installation, verify door latching and test operation before reassembly

This detergent box assembly replaces the washer's front detergent/dispenser drawer so detergents and additives dispense cleanly during cycles. It restores proper product delivery and helps reduce residue build-up in the dispenser area. What it does:

• Houses and channels liquid and powdered detergents and additives into the wash at the correct time
• Prevents detergent from pooling or leaking into the washer cabinet when functioning correctly
• Reduces visible residue and clogging in the dispenser area that can affect dispensing
• Compatible with front-load washer detergent/dispenser systems that use a removable drawer

• One detergent box assembly

• Remove power and water supply before beginning service
• Typically installs by sliding into the dispenser housing and securing any retaining clips or screws
• Inspect surrounding seals and rails for damage and clean any residue before installing the new assembly

The Softener Cap is an OEM part for LG washing machines. It serves as the lid and housing for the internal water softener that prevents mineral deposits from building up. The softener cap funnels water to and from the softener compartment during various stages of the wash cycle.

Causes of a faulty softener cap can include cracked or degraded seals over extended usage, impact damage distorting fit, or harsh cleaners affecting plastics over time.

Symptoms of a bad softener cap include:

• Water leaks from around the softener area  
• The cap not closing or sealing properly 
• Mineral buildup occurring prematurely
• The softener not functioning as intended

This genuine LG replacement is compatible with Sears/Kenmore machines.

This softener dispenser cap replaces the worn or cracked cap that covers the fabric softener chamber, restoring proper containment and controlled release of liquid softener during the wash cycle. A simple, low-cost part that prevents leaks and keeps the dispenser functioning. What it does

• Covers and seals the fabric softener compartment so liquid stays in the dispenser until the rinse cycle.
• Helps prevent softener from leaking into the washer drum between cycles.
• Restores a secure fit when the original cap is cracked, warped, or missing.
• Resolves issues with softener dispensing at the wrong time or pooling in the dispenser.

• One softener dispenser cap (1 piece)

• Disconnect power to the washer before accessing internal parts and follow all safety precautions.
• Typically accessed by removing the dispenser drawer or top panel—refer to your washer's service instructions.
• Inspect surrounding dispenser components for damage and replace any worn parts to ensure a proper seal.
• No electrical connections; basic hand tools may be required.

This nozzle assembly directs and focuses spray for proper cleaning or dispensing, restoring correct fluid flow and spray pattern. It helps maintain performance and prevents uneven distribution during operation. What it does:

• Directs spray or fluid flow to the correct area for cleaning or dispensing
• Restores even spray pattern and coverage for improved cleaning performance
• Helps stop erratic or weak spray caused by a damaged or clogged nozzle
• Can reduce leaking or overspray from a broken or misaligned nozzle

• One nozzle assembly

• Disconnect power and shut off water supply before starting
• Access may require removing exterior panels or dispenser components; keep track of screws and fasteners
• Inspect mounting gasket or seals and replace if worn to prevent leaks

This replacement door hinge restores smooth, aligned opening and closing. Replacing a worn or bent hinge helps the door sit squarely and seal or latch properly, preventing rubbing, binding, and premature wear on adjoining parts. What it does:

• Supports and pivots the door for smooth operation
• Maintains door alignment for proper latch/seal engagement
• Replaces bent, cracked, or loose hinges that affect door movement
• Common symptoms include door sagging, rubbing/binding, difficulty closing, or visible hinge damage

• One door hinge

• Disconnect power before servicing; remove door contents to reduce weight
• Support the door while removing hinge fasteners to prevent strain on the new part
• Transfer and reuse original hardware as required; tighten screws to manufacturer-recommended snugness
• Verify door alignment and operation after installation and adjust as needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This factory parts assembly replaces a worn or damaged assembly to restore the appliance's original function and fit. It's a direct-fit replacement designed to simplify repair and reduce downtime. What it does:

• Replaces the original factory assembly to restore the affected mechanism
• Re-establishes proper alignment and connections for the related components
• Helps stop symptoms like intermittent operation, loose fit, or non-functioning mechanism
• Matches OEM form and mounting points for a straightforward swap

• One complete parts assembly as shown

• Always disconnect power before starting any repair
• Use basic hand tools; avoid forcing connectors or mounting tabs

The Valve Assembly, Inlet is an OEM replacement part for LG washing machines. It is a crucial component that controls the flow of water into the washing machine tub during the various cycles.

Symptoms of a bad valve assembly, inlet include:

• The washing machine not filling with water or filling slowly
• Incorrect water levels during the wash or rinse cycles
• Water temperature issues (too hot or too cold)
• Leaks or water dripping from the valve assembly area

Causes of a bad inlet valve can range from sediment buildup or debris clogging the valve, to electrical malfunctions or physical damage over time.

This OEM LG part is also compatible with Sears/Kenmore models.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Dispenser Assembly is an OEM part for LG washing machines. This part dispenses the appropriate amounts of detergent, fabric softener, or other laundry additives at the right time during the wash cycle.

Causes of a bad Dispenser Assembly can include clogging or buildup of residue, damage to the dispensing mechanisms or components, or issues with the electronic controls that regulate the dispensing process.

Symptoms of a bad washer Dispenser Assembly include:

• Improper dispensing of detergent or fabric softener
• Leaks or drips from the dispenser area
• The dispenser drawer not opening or closing properly
• Failure of the dispenser to dispense at the correct time during the cycle

This OEM LG part is also compatible with some Kenmore models.

This clamp assembly secures a hose or tubing connection to maintain a watertight seal and reduce vibration. Replacing a worn or damaged clamp helps stop leaks and prevents hoses from slipping loose during operation. What it does:

• Holds a hose or tube firmly in place to maintain proper sealing at the connection point.
• Prevents leaks caused by loose, cracked or corroded clamps.
• Reduces vibration and rattling from unsecured hoses.
• Common symptom: visible leaking, water pooling, or a loose hose connection.

• Disconnect power and shut off water supply before starting any repair.
• Use the correct pliers or screwdriver for the clamp type; avoid damaging the hose.
• Inspect the mating hose and seal; replace any cracked or hardened hoses before reinstalling.
• Do not overtighten—tighten just enough to secure the hose without cutting or deforming it.

This cover cap is a small plastic trim piece that restores a finished appearance and helps protect the underlying fastener or opening from dirt and debris. It's a simple cosmetic and protective replacement for worn or missing caps. What it does:

• Covers and protects exposed screws, fasteners or small openings on the appliance
• Prevents dirt, lint and moisture from entering vulnerable gaps
• Restores a clean, finished look to damaged or missing trim
• Common symptom: missing, cracked or loose cap that leaves a visible hole or exposed screw

• Disconnect power to the appliance before starting any repair
• Usually installs by snapping into place; may require removing an adjacent panel or fastener first
• Avoid excessive force to prevent breaking the plastic; use a plastic trim tool if needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.