Parts for Lg LDTS5552S/00: Tub Assy Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Dishwasher not dispensing detergent or rinse aid? This detergent dispenser assembly restores proper soap release. Remove inner door panel to access.

This handle assembly replaces a damaged or worn refrigerator door handle to restore a secure grip and normal door operation. It provides a like-for-like replacement that mounts to the door for everyday opening and closing. What it does:

• Replaces a broken, loose, or cracked refrigerator door handle
• Restores a secure grip for opening and closing the door
• Helps prevent door damage and improves appearance
• Works with factory mounting points to maintain proper door operation

• Basic hand tools typically required; remove power only if working near electrical components
• Handle mounts to existing door hardware; retain original screws or fasteners unless new ones are supplied
• Use caution to avoid scratching the door finish during removal and installation
• If mounting holes or clips are damaged, inspect door hardware and replace as needed

Secures dishwasher to countertop or cabinet to prevent tipping. Includes mounting brackets for stable installation. Replace if broken, missing, or worn.

Replacement parts assembly for your dishwasher. Installs internally to restore proper operation. Order if your original assembly is damaged or missing.

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

Replace your dishwasher door hinge spring to restore proper tension and alignment. Fixes sagging or uneven door movement for a reliable seal. Confirm fit.

Door cable connector assembly for dishwashers. Guides and supports the door through opening and closing motions. Replace if cracked, broken, or worn.

Supports the drum for smooth, quiet rotation. Replace when you hear squeaking, thumping, or notice wobbling during cycles. Verify fit with your model number.

Lower rack roller for dishwashers. Mounts to the bottom rack assembly to allow smooth gliding in and out. Replace if cracked, broken, or worn down.

Fixes AE error codes and incorrect water fill issues in dishwashers. This sensor monitors tub water levels to optimize washing performance and fill.

Fix ice maker not filling or water dispenser leaking with this check valve. Prevents backflow in the water supply line. DIY-friendly repair part.

Fix NE error code or weak spray arm pressure with this diverter motor. Controls water flow to spray arms. Moderate DIY repair, about 1 hour install.

Dishwasher won't start or stops mid-cycle? This door micro switch detects secure closure before cycles begin. Direct fit repair for door latch issues.

Fix spray arms not rotating or dishes not getting clean. This water distribution shaft assembly directs water to spray arms during wash cycles.

Dishwasher front cover assembly that mounts to the outer door panel. Replace if cracked, dented, discolored, or damaged to restore appearance.

Fix grinding noises, LE error codes, or poor water circulation in your dishwasher. This pump and motor assembly requires moderate skill to replace.

Exterior door panel for dishwashers. Covers and protects internal door components while providing finished appearance. Replace if cracked, dented, or worn.

Steel lower cover assembly that mounts along the bottom of your dishwasher for structural support and protection. Replace if cracked, rusted, or damaged.

Supports and aligns the freezer drawer for smooth gliding. Replace if drawer sticks, sags, or seals poorly. Confirm fit with your model number.

Water inlet hose channels supply water into your dishwasher for proper filling. Replace if leaking, cracked, or loose to restore secure connection. Verify fit with your model number before ordering.

Snap-on trim cap that covers exposed fasteners or openings in your dishwasher. Replaces cracked, broken, or missing caps to restore a finished look.

Fix a dishwasher that won't drain or squeals during draining. This drain pump case assembly houses the pump that removes water during the drain cycle.

Dishes not getting clean in the lower rack? The lower spray arm may be clogged with mineral buildup or damaged. Requires removing two screws to replace.

Dishes not getting clean or spray arm not rotating? This nozzle shaft distributes water to spray arms. DIY-friendly fix with minimal effort needed.

Seals the fill funnel to prevent water leaks in your dishwasher. Replace if you notice water pooling or leaking during cycles. Verify fit with your model.

Fixes poor cleaning and spotty dishes caused by weak water spray. This dishwasher spray nozzle assembly restores proper water distribution. Moderate DIY.

Fix poor cleaning or weak spray with a new dishwasher spray arm manifold. Distributes water to all spray arms for complete dish coverage. DIY repair.

Captures food particles and debris to maintain proper water flow. Replace when clogged or damaged to restore filtering performance. Confirm fit with your model.

Reduces sediment, chlorine taste and odor in your refrigerator's drinking water and ice. Replace every 6 months for best performance. Confirm fit with your model.

Cracked or broken control panel housing? This case assembly secures and protects internal control components while restoring a finished look to your unit.

Dishwasher won't start or runs with door open? This door safety switch assembly detects door position to ensure cycles only run when closed.

Parts assembly for dishwashers. Replaces damaged, broken, or missing assembly components. Essential for restoring proper function and appearance.

Outer housing case assembly for dishwashers. Supports and protects internal components while maintaining fit and finish. Replaces cracked or damaged housing.

Prevents water leaks by sealing the dishwasher door. Replace if you notice moisture escaping or reduced cleaning performance. Confirm fit with your model.

Fix leaks or low water flow during cycles with this dishwasher water inlet hose. Connects your home water supply to the inlet valve. Easy install.

Supports and guides moving components inside your dishwasher. Replace if your rail is cracked, broken, bent, or missing to restore smooth operation.

Cap assembly for dishwashers. Replaces worn, cracked, or missing cap components. Direct replacement part restores proper coverage and protection.

Dishwasher not starting or responding to controls? This control assembly restores normal operation. Common repair for failed control systems.

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

Fix poor drying or weak airflow in your dishwasher with a new blower motor casing assembly. Houses motor, fan, and wax motor for proper ventilation.

Dishwasher holder secures components in place. Replace if cracked, broken, or missing to restore proper assembly and prevent rattling or movement.

Holder component for dishwasher interior mounting. Replaces broken, cracked, or missing holders that secure internal parts in place.

Fix a dishwasher door that won't stay closed or a machine that won't start. This door latch lock assembly restores secure closure for safe operation.

Fix a dishwasher door that won't close or latch properly with this door latch holder. Secures the lock assembly for reliable door engagement and safe operation.

Replacement mounting screw for dishwashers. Secures panels, brackets, and internal components. Needed when original fastener is stripped, missing, or lost.

Stopper roller guides and cushions dishwasher panels for smooth, quiet operation. Replace if door binds, rubs, or moves unevenly. Confirm fit with your model.

Lower cover assembly for dishwashers. Protects internal tub mechanisms. Replace if cracked, dented, or damaged. Includes gasket and mounts with screws.

Seals the opening between dishwasher door and tub to prevent leaks. Replace when worn, cracked, or leaking. Verify fit with your model number.

Dishwasher making loud fan noises or blowing air inefficiently? This blower cover directs airflow and protects internal fan components. DIY-friendly fix.

Replace your dishwasher's duct assembly if cracked, broken, or missing. This duct channels air during the drying cycle. Direct-fit component.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement drain hose assembly for dishwashers. Routes wastewater from the tub to your home's drain system. Replace if cracked, kinked, or leaking.

Door gasket packing creates a watertight seal around your dishwasher door. Replace if you notice leaks or water pooling during wash cycles. Verify fit with your model number before ordering.

Fix water leaks or low water flow to your dishwasher with this water line hose connector. Secures hose sections for reliable water delivery.

Holder component for dishwashers. Secures internal parts in place during wash cycles. Replace if cracked, broken, or missing to restore proper fit.

Fix intermittent power issues or failed electrical connections in your dishwasher with this connector assembly. Restores reliable signal transfer between components.

Drain hose assembly directs wash water from your dishwasher to the drain or disposal. Replace if cracked, leaking, kinked, or disconnected.

Replace your dishwasher's broken or missing holder. This structural component secures parts in place during operation. Essential for proper assembly.

Mounting bush for dishwasher installation. Replaces cracked, worn, or missing bushings that secure components. Essential for proper structural support.

Lower rack assembly for dishwashers. Holds dishes, utensils, and cookware during wash cycles. Replace if cracked, broken, or wheels are worn or missing.

Replacement upper rack assembly for dishwashers. Restores secure dish and glassware support when original rack is damaged, bent, warped, or missing.

Replace your refrigerator door hinge to restore proper alignment and smooth operation. Fixes sagging doors and sealing issues. Confirm fit with model number.

Supports and pivots your refrigerator door for smooth opening and secure closing. Replace when door sags, misaligns, or won't seal properly. Confirm fit with your model number.

Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

Plastic clip that secures tine rows to the lower dishrack. Replace if broken, cracked, or missing to keep tines stable and dishes properly positioned.

Secures tine rows to dishwasher rack assembly. Replace if clip is cracked, broken, or missing, causing tines to become loose and unable to hold dishes properly.

Replace your rusted, cracked, or bent dishwasher rack assembly. Restores secure dish support and proper spacing for safe loading and even washing.

Upper dish rack assembly for dishwashers. Holds dishes during wash cycles. Replace if rack is cracked, broken, or prongs are damaged or missing.

If your dishwasher stopped working due to worn internal components, this parts assembly restores full function. Replaces damaged sub-assembly parts.

Parts assembly for dishwashers. Replaces broken, damaged, or missing components. Check your model number for proper fit and compatibility.

Plastic bracket that secures the horizontal tine rows in your dishwasher's upper spray arm assembly. Replace if cracked, broken, or missing.

Replace broken or missing tines in your dishwasher's dish rack. This component supports and secures dishes during wash cycles. Easy replacement part.

Fix a dishwasher with no power or won't turn on. This noise filter assembly repairs electrical interference issues. DIY-friendly repair part.

Replace broken or missing tines in your dishwasher's dish rack. This prong holds and spaces dishes securely during wash cycles. Ideal for cracked tines.

Replacement dishwasher rack assembly for securely holding dishes during wash cycles. Installs as the main dish rack. Needed when original is cracked or worn.

Dishwasher won't start or lock? Flashing lights during cycle? This door latch assembly with safety switches fixes door sensing issues. Moderate DIY repair.

Dishwasher door gasket creates a watertight seal to prevent leaks during wash cycles. Replace if you notice water pooling or leaking around the door.

Replaces worn or damaged outer door frame trim on your dishwasher. Restores proper alignment, sealing, and finished appearance. Confirm fit with your model.

Wire rack shelf for dishwasher storage. Replaces bent, worn, or missing racks to restore proper shelf support and leveling inside your dishwasher.

Upper rack assembly for dishwashers. Installs in the top position to hold cups, glasses, and small dishes. Replace if cracked, broken, or wheels are worn.

Replace your damaged or missing dishwasher rack wire. This wire assembly installs inside the rack to provide support for dishes and glassware.

Replaces damaged, bent, or broken upper dishwasher rack. Holds dishes, cups, and small items securely for organized loading and better spray access.

Fixes water leaks or poor water flow to the dispenser. This guide secures and routes the water tube properly, preventing kinks. Quick DIY repair.

Fix dripping or splashing water from your dishwasher dispenser with this nozzle assembly. Channels water and ice for controlled, clean delivery to your cup.

Small mounting bracket that secures internal dishwasher components in place. Replacement needed when bracket is cracked, broken, or missing, causing parts to shift or become misaligned during operation.

Replace your dishwasher control panel assembly when buttons stop responding or the display malfunctions. Restores cycle selection and function control. Verify fit with your model number before ordering.

Factory parts assembly for dishwashers. Installs in place of original assembly. Replace if damaged, worn, or broken to restore proper configuration.

Dishwasher not filling with water or showing IE error? The water inlet valve controls water flow into the tub. Easy DIY replacement in under an hour.

Guides dishwasher rack smoothly along its track. Replace if racks stick, wobble, or derail during loading. Confirm fit with your model number.

Replacement parts assembly for dishwasher. Install to replace broken, cracked, or missing components. Restores proper structure and appearance.

Fixes uneven cooling between freezer and fresh food sections. This air damper assembly regulates airflow to restore proper temperatures in both compartments.

Replacement dishwasher name plate with model information. Installs on exterior door panel. Replace if missing, faded, peeling, or damaged.

Wire harness for dishwashers. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are broken.

Replace your dishwasher's damaged or broken wire harness. This electrical component connects internal wiring systems. Order when harness is frayed or worn.

Fix dishwasher display issues, control panel failures, or buttons not responding. This power control board assembly restores electronic functions.

Cabinet base for dishwasher. Installs at bottom of unit to provide structural support. Replace if cracked, damaged, or corroded. Essential component.

Dishwasher buttons not responding or display blank? This control board assembly restores front panel functions. Moderate DIY difficulty repair.

If your dishwasher won't start, buttons don't respond, or cycles won't run, the main control board may have failed. This PCB manages power and controls.

Adjustable leveling leg installs under dishwasher to elevate unit and ensure proper drainage. Replace if cracked, broken, or missing for stability.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.